LEDONE 8FT LED Vapor Tight Light Instruction Manual

1. ບົດແນະນຳ

This manual provides detailed instructions for the safe installation, operation, and maintenance of your LEDONE 8FT LED Vapor Tight Light. Please read this manual thoroughly before installation and retain it for future reference. This fixture is designed for demanding environments requiring high resistance to water, dust, and corrosion, such as parking garages, car washes, cold storage, and industrial facilities.

2. ຂໍ້ມູນຄວາມປອດໄພ

ຄຳເຕືອນ: ສ່ຽງໄຟຊັອດ. ຕັດການເຊື່ອມຕໍ່ໄຟຟ້າກ່ອນທີ່ຈະຕິດຕັ້ງຫຼືໃຫ້ບໍລິການ.

• Installation must be performed by a qualified electrician in accordance with the National Electrical Code (NEC) and local codes.
• ຮັບປະກັນການສະຫນອງ voltage is compatible with the fixture's requirements (120-277Vac).
• Do not handle energized fixtures with wet hands or while standing on wet or damp ດ້ານ.
• ຢ່າພະຍາຍາມດັດແປງ ຫຼື ຖອດອຸປະກອນອອກ. ບໍ່ມີຊິ້ນສ່ວນໃດໆທີ່ຜູ້ໃຊ້ສາມາດສ້ອມແປງໄດ້ຢູ່ພາຍໃນ.
• ໃສ່ອຸປະກອນປ້ອງກັນສ່ວນບຸກຄົນທີ່ເຫມາະສົມ (PPE) ໃນລະຫວ່າງການຕິດຕັ້ງ.
• ຮັບປະກັນວ່າອຸປະກອນຖືກຕິດຕັ້ງຢ່າງປອດໄພເພື່ອປ້ອງກັນການຕົກ.

3. ເນື້ອໃນຊຸດ

ກວດສອບວ່າອົງປະກອບທັງໝົດມີຢູ່ ແລະບໍ່ມີຄວາມເສຍຫາຍກ່ອນທີ່ຈະດໍາເນີນການຕິດຕັ້ງ.

• LEDONE 8FT LED Vapor Tight Light Fixture
• Mounting Hardware (clips, screws, anchors)
• ຄູ່ມືແນະ ນຳ (ເອກະສານນີ້)

4. ການຕິດຕັ້ງແລະການຕິດຕັ້ງ

4.1. ການຕິດຕັ້ງກ່ອນ

1. ປິດໄຟ: Locate the circuit breaker or fuse box and turn off the power supply to the installation area. Verify power is off using a voltage ເຄື່ອງທົດສອບ.
2. ແກະກ່ອງ: Carefully remove the fixture from its packaging. Inspect for any shipping damage.
3. ເລືອກວັດtage and Color Temperature (CCT): Before mounting, adjust the wattage and CCT switches located on the fixture. These switches allow you to select between 60W, 80W, or 100W and 3500K, 4000K, or 5000K. Make your selection based on your lighting requirements.

Image: Product dimensions and location of wattage/CCT selection switches.

4.2. ການຕິດຕັ້ງ Fixture

The fixture is designed for surface mounting. Use the provided mounting clips and hardware.

1. Mark the desired mounting locations on the ceiling or wall. Ensure the marks are level and spaced appropriately for the fixture's length.
2. Drill pilot holes at the marked locations. Insert wall anchors if mounting into drywall or masonry.
3. ຍຶດຄລິບຕິດຕັ້ງໃສ່ໜ້າດິນໂດຍໃຊ້ສະກູທີ່ໃຫ້ມາ.
4. Snap the LED vapor tight fixture into the mounted clips, ensuring it is firmly seated.

ຮູບພາບ: Example of surface mounting in a facility.

Image: Detail of the linkable design feature.

4.3. ສາຍໄຟຟ້າ

This fixture supports 0-10V dimming. Follow the wiring diagram below and local electrical codes.

• ເຊື່ອມ​ຕໍ່ ດຳ ສາຍຈາກ fixture ກັບ ແຖວ (L) wire from the power supply.
• ເຊື່ອມ​ຕໍ່ ສີຂາວ ສາຍຈາກ fixture ກັບ ເປັນກາງ (N) wire from the power supply.
• ເຊື່ອມ​ຕໍ່ ສີຂຽວ ສາຍຈາກ fixture ກັບ ດິນ (GND) wire from the power supply.
• For 0-10V dimming: Connect the ສີມ່ວງ ສາຍຈາກ fixture ກັບ ມືດມົວ+ wire from the 0-10V dimmer. Connect the ສີບົວ/ສີຂີ້ເຖົ່າ ສາຍຈາກ fixture ກັບ ມືດມົວ- wire from the 0-10V dimmer.
• ຮັບປະກັນວ່າການເຊື່ອມຕໍ່ທັງໝົດແມ່ນປອດໄພໂດຍໃຊ້ຕົວເຊື່ອມຕໍ່ສາຍໄຟທີ່ເໝາະສົມ.

Note: If 0-10V dimming is not used, cap the purple and pink/gray wires individually with wire nuts.

5. ຄໍາແນະນໍາການດໍາເນີນງານ

1. ເປີດ: Once installation and wiring are complete, restore power to the circuit at the breaker or fuse box. The fixture should illuminate.
2. ມືດມົວ: If connected to a compatible 0-10V dimmer, adjust the dimmer control to achieve the desired light output level.
3. ວັດtage and CCT Adjustment: ວັດtage and CCT are set via internal switches during installation. These are not typically adjusted during normal operation. If changes are needed, disconnect power before accessing the switches.

6. ບໍາລຸງຮັກສາ

The LEDONE Vapor Tight Light is designed for long-term, low-maintenance operation. Regular cleaning can help maintain optimal light output.

• ທໍາຄວາມສະອາດ: ຕັດການເຊື່ອມຕໍ່ໄຟຟ້າກ່ອນທີ່ຈະທໍາຄວາມສະອາດ. ໃຊ້ອ່ອນ, ງamp cloth with a mild, non-abrasive cleaner to wipe the exterior of the fixture. Do not use harsh chemicals or abrasive pads, as these can damage the finish or lens.
• ການກວດກາ: Periodically inspect the fixture and mounting hardware for any signs of damage, loose connections, or wear. Address any issues promptly.
• ບໍ່ມີສ່ວນທີ່ຜູ້ໃຊ້ບໍລິການ: The LED light source and driver are integrated components. Do not attempt to open or repair the fixture. Contact qualified personnel for any issues beyond basic cleaning and inspection.

Image: The IP65 waterproof rating ensures durability in wet conditions.

7. ການແກ້ໄຂບັນຫາ

Before performing any troubleshooting, ensure power is disconnected at the circuit breaker.

8. ຂໍ້ມູນຈໍາເພາະ

Image: Key features and certifications of the LEDONE Vapor Tight Light.

9. ຂໍ້ມູນການຮັບປະກັນ

LEDONE products are manufactured to high quality standards. This product comes with a standard manufacturer's warranty. Please refer to the product packaging or the official LEDONE webເວັບໄຊທ໌ສຳລັບເງື່ອນໄຂ ແລະ ຂໍ້ກຳນົດການຮັບປະກັນສະເພາະ. ເກັບຫຼັກຖານການຊື້ຂອງທ່ານໄວ້ເພື່ອການຮຽກຮ້ອງການຮັບປະກັນ.

10. ການຊ່ວຍເຫຼືອລູກຄ້າ

If you have any questions, require technical assistance, or need to report an issue, please contact LEDONE customer support:

• Webເວັບໄຊ: Visit the LEDONE Store on Amazon (ສຳລັບການສອບຖາມທົ່ວໄປ)
• ອີເມວ: ອ້າງເຖິງການຫຸ້ມຫໍ່ຜະລິດຕະພັນ ຫຼືຢ່າງເປັນທາງການ webເວັບໄຊທ໌ສຳລັບອີເມວສະໜັບສະໜູນໂດຍກົງ.
• ໂທລະສັບ: ອ້າງເຖິງການຫຸ້ມຫໍ່ຜະລິດຕະພັນ ຫຼືຢ່າງເປັນທາງການ website for direct support phone number.

Please have your product model number (8FT LED Vapor Tight Light) and proof of purchase ready when contacting support.