ແນະນຳ
This manual provides detailed instructions for the installation, operation, and maintenance of your OREiN 2-in-1 Bathroom Exhaust Fan with Light. Please read this manual thoroughly before installation and use to ensure proper function and safety. Keep this manual for future reference.
ຂໍ້ມູນຄວາມປອດໄພທີ່ສໍາຄັນ
Always follow basic safety precautions when installing, operating, or maintaining electrical appliances. Failure to do so may result in fire, electric shock, or injury to persons.
- Disconnect power at the service panel before wiring or servicing this unit.
- ສາຍໄຟທັງໝົດຕ້ອງປະຕິບັດຕາມລະຫັດ ແລະ ມາດຕະຖານໄຟຟ້າໃນທ້ອງຖິ່ນ.
- ເຄື່ອງນີ້ຖືກອອກແບບມາສຳລັບການລະບາຍອາກາດທົ່ວໄປເທົ່ານັ້ນ. ຫ້າມໃຊ້ເພື່ອລະບາຍວັດສະດຸ ແລະ ໄອນ້ຳອັນຕະລາຍ ຫຼື ລະເບີດ.
- To reduce the risk of fire or electrical shock, do not expose this unit to water or moisture.
- ຮັບປະກັນການຕໍ່ຫນ້າດິນທີ່ເຫມາະສົມເພື່ອປ້ອງກັນການຊ໊ອກໄຟຟ້າ.
- ຢ່າຕິດຕັ້ງຢູ່ໃນພື້ນທີ່ປຸງແຕ່ງອາຫານ.
- ໃສ່ແວ່ນຕາຄວາມປອດໄພ ແລະ ຖົງມືສະເໝີໃນລະຫວ່າງການຕິດຕັ້ງ.
ສິນຄ້າເກີນview ແລະຄຸນສົມບັດ
The OREiN 2-in-1 Bathroom Exhaust Fan with Light is designed to provide efficient ventilation and illumination for your bathroom. It features a quiet operation and selectable color temperature LED lighting.
The OREiN 2-in-1 Bathroom Exhaust Fan with Light, showcasing its integrated design and the three selectable light color temperatures (3000K, 4000K, 5000K) at the bottom.
Diagram illustrating the premium materials and components, including the heavy-duty housing, powerful motor, easy installation bracket, and energy-efficient LED light.
Visual comparison demonstrating the powerful 100 CFM airflow, showing a bathroom before and after the fan effectively removes steam and humidity.
ລະເບີດຂຶ້ນ view of the energy-efficient and quiet DC motor, highlighting its design for ultra-quiet operation at 1.5 sones.
ຄຸນນະສົມບັດທີ່ສໍາຄັນ:
- ປະສິດທິພາບສູງ: Operates at 100 CFM (Cubic Feet Per Minute) for effective moisture and odor removal.
- ການດໍາເນີນງານງຽບ: Rated at 1.5 Sones for minimal noise disruption.
- ແສງ LED ປະສົມປະສານ: Bright 1000lm LED light illuminates your bathroom.
- 3CCT Selectable Lighting: Choose between 3000K (soft white), 4000K (bright white), or 5000K (daylight) color temperatures.
- ຟັງຊັນແສງກາງຄືນ: Includes a 2200K nightlight for low-level illumination in the dark.
- ການກໍ່ສ້າງທົນທານ: Equipped with high-quality components and a DC motor for long-lasting performance.
- ການຕິດຕັ້ງງ່າຍດາຍ: Designed with a fast bracket for secure and straightforward installation between ceiling joists.
- ການຢັ້ງຢືນ: FCC and ETL Listed for reliability and safety.
ຂໍ້ມູນຈໍາເພາະ
Detailed diagram showing the product dimensions, including the light cover size (10.1" x 10.1"), housing dimensions (7.68" x 7.55" x 6.42"), and recommended ceiling opening size (8.11" x 7.48").
An infographic summarizing key product specifications such as material, exhaust volume, sound level, power consumption, and color temperature options.
| ຂໍ້ມູນຈໍາເພາະ | ມູນຄ່າ |
|---|---|
| ຊື່ຕົວແບບ | OL17001-3CCT |
| ຄວາມອາດສາມາດການໄຫຼວຽນຂອງອາກາດ | 100 CFM |
| ລະດັບສຽງ | 1.5 ຊິມ |
| ວັດtage | 25W (Fan) + 10W (Light) |
| ຜົນຜະລິດແສງສະຫວ່າງ | 1000 ມ |
| ອຸນຫະພູມສີ | 3000K/4000K/5000K Selectable, 2200K Nightlight |
| Housing Dimensions (L x W x H) | 7.68" x 7.55" x 6.42" |
| Light Cover Size | 10.1" x 10.1" |
| Ceiling Opening Size | 8.11" x 7.48" |
| ສະບັບtage | 120 ໂວນ |
| ແຫຼ່ງພະລັງງານ | AC |
| ປະເພດການຕິດຕັ້ງ | Flush Mount |
| ການຢັ້ງຢືນ | FCC, ETL ລາຍຊື່ |
ການຕິດຕັ້ງແລະການຕິດຕັ້ງ
Before beginning installation, ensure all necessary tools and materials are available. Always disconnect power at the circuit breaker before starting any electrical work.
ເຄື່ອງມື ແລະວັດສະດຸ (ບໍ່ລວມ):
- Screwdriver (Phillips ແລະ Flathead)
- ເສັ້ນລວດ
- ເຈາະ
- ເທບການວັດແທກ
- ມີດ Utility ຫຼື Drywall Saw
- Duct Tape or Clamps
- ແວ່ນຕາຄວາມປອດໄພ ແລະຖົງມື
ຂັ້ນຕອນການຕິດຕັ້ງ:
- ກະກຽມການເປີດ: Ensure the ceiling opening is 8.11" x 7.48". If replacing an existing fan, remove the old unit.
- ຕິດຕັ້ງທີ່ຢູ່ອາໄສ: The fan comes with a fast bracket for secure installation. Mount the bathroom fan light combo between ceiling joists using the fast bracket, or nail/screw it directly to the joist. The housing dimensions are 7.68" x 7.55" x 6.42".
- ເຊື່ອມຕໍ່ທໍ່ລະບາຍອາກາດ: Connect the appropriate ductwork (not included) to the fan's exhaust port. Ensure the duct does not bend into the opening to block the damper. Secure with duct tape or clamps to prevent air leaks.
- ສາຍໄຟ: Follow the wiring diagrams provided below. Ensure all connections are secure and comply with local electrical codes. This unit requires a 120V AC power source.
- ຕິດຕັ້ງຝາປິດໄຟ: Once wiring is complete and tested, attach the light cover (10.1'' x 10.1'') to the fan housing.
Detailed wiring diagrams for the OREiN bathroom fan, showing configurations for a single switch controlling both fan and light, and separate switches for fan and light. Includes a warning about duct obstruction.
ຄໍາແນະນໍາການດໍາເນີນງານ
Your OREiN Bathroom Exhaust Fan with Light is designed for simple operation. The fan and light functions are typically controlled by wall switches (purchased separately).
ປະຕິບັດການພັດລົມ:
- Turn on the wall switch connected to the fan to activate the exhaust fan.
- The fan operates at 100 CFM to effectively remove moisture and odors from the bathroom.
- Note: The fan may take a few seconds to start up. This slow start mechanism is designed to protect the DC motor and extend its lifespan.
Light Operation (3CCT Selectable & Nightlight):
Visual representation of the three selectable color temperatures: 5000K (daylight), 4000K (bright white), and 3000K (soft white).
An illustration detailing the 3CCT (3000K/4000K/5000K) and nightlight (2200K) features, including the wattage ແລະ lumen ຜົນຜະລິດ.
- Selecting Color Temperature (CCT): Before installation, locate the toggle switch on the back of the bathroom fan housing. Slide this switch to preset your desired LED color temperature: 3000K (soft white), 4000K (bright white), or 5000K (daylight). This setting is fixed once installed unless the unit is accessed again.
- Activating Nightlight: To switch to the 2200K nightlight mode, cycle the light switch (On-Off-On) within 2 seconds. This rapid cycling will toggle between the main light and the nightlight mode.
ບໍາລຸງຮັກສາ
Regular maintenance helps ensure optimal performance and extends the lifespan of your exhaust fan. Always disconnect power at the circuit breaker before performing any maintenance.
Cleaning the Light Cover:
- Carefully remove the light cover from the fan housing.
- Wipe the cover with a soft, damp cloth. Use mild soap if necessary.
- ຫ້າມໃຊ້ເຄື່ອງຊັກຜ້າ ຫຼືສານລະລາຍທີ່ຂັດ, ເພາະວ່າພວກມັນອາດຈະທຳລາຍການສໍາເລັດຮູບ.
- Ensure the cover is completely dry before reattaching.
Cleaning the Fan Housing and Motor:
- With the power off, gently vacuum or wipe away any dust or debris from the fan blades and interior of the housing.
- Do not spray water directly into the motor or electrical components.
- ຮັບປະກັນວ່າທຸກຊິ້ນສ່ວນແຫ້ງກ່ອນທີ່ຈະຟື້ນຟູພະລັງງານ.
ການແກ້ໄຂບັນຫາ
If you experience issues with your OREiN Bathroom Exhaust Fan with Light, refer to the following common problems and solutions. If the problem persists, contact customer support.
| ບັນຫາ | ສາເຫດທີ່ເປັນໄປໄດ້ | ການແກ້ໄຂ |
|---|---|---|
| ພັດລົມບໍ່ເປີດ. | ບໍ່ມີພະລັງງານກັບຫນ່ວຍບໍລິການ. ການເຊື່ອມຕໍ່ສາຍໄຟວ່າງ. ສະຫຼັບຝາຜິດ. | Check circuit breaker and ensure power is on. ກວດສອບວ່າການເຊື່ອມຕໍ່ສາຍໄຟທັງໝົດແໜ້ນໜາດີ (ໂດຍປິດເຄື່ອງ). ທົດສອບ ຫຼື ປ່ຽນສະວິດຝາ. |
| ແສງບໍ່ໄດ້ເປີດ. | ບໍ່ມີພະລັງງານກັບຫນ່ວຍບໍລິການ. ການເຊື່ອມຕໍ່ສາຍໄຟວ່າງ. ສະຫຼັບຝາຜິດ. | Check circuit breaker and ensure power is on. ກວດສອບວ່າການເຊື່ອມຕໍ່ສາຍໄຟທັງໝົດແໜ້ນໜາດີ (ໂດຍປິດເຄື່ອງ). ທົດສອບ ຫຼື ປ່ຽນສະວິດຝາ. |
| ພັດລົມມີສຽງດັງ. | Ductwork obstruction or improper installation. ການຕິດຕັ້ງວ່າງ. ຂີ້ເຫຍື້ອໃນໃບພັດລົມ. | Check ductwork for kinks or blockages. Ensure damper is not obstructed. Verify the fan housing is securely mounted to the joists. Disconnect power and clean fan blades. |
| ຍັງມີລະບາຍອາກາດ/ຄວາມຊຸ່ມຊື່ນບໍ່ດີຢູ່. | ການອຸດຕັນຂອງທໍ່ລະບາຍອາກາດ. ຂະໜາດພັດລົມບໍ່ພຽງພໍກັບຫ້ອງ. Air leaks in ductwork. | Check ductwork for blockages or kinks. Ensure the fan's CFM rating is appropriate for your bathroom size. Seal all duct connections with appropriate tape. |
| Light color temperature is incorrect. | CCT toggle switch set incorrectly. Accidental nightlight activation. | Ensure the CCT toggle switch on the fan housing is set to your desired temperature (requires accessing the unit). Cycle the light switch (On-Off-On within 2 seconds) to toggle between main light and nightlight mode. |
ຂໍ້ມູນການຮັບປະກັນ
OREiN products are manufactured to high-quality standards and are warranted to be free from defects in materials and workmanship. Specific warranty terms and duration may vary. Please retain your proof of purchase for warranty claims.
For detailed warranty information or to initiate a warranty claim, please contact OREiN customer support using the information provided in the Support section.
ການຊ່ວຍເຫຼືອລູກຄ້າ
For any questions, technical assistance, or support regarding your OREiN Bathroom Exhaust Fan with Light, please contact our customer service team.
- ສະຫນັບສະຫນູນໂທລະສັບ: 1(844)506-1530 (24-Hour Service)
- ສະຫນັບສະຫນູນອອນໄລນ໌: Contact us directly on Amazon or search for 'OREiN' online to find our official website and contact options.
- ຜົນຕອບແທນ: While returns can be processed through Amazon's logistics, we encourage you to contact us first for assistance with any issues before initiating a return.
Image showing a customer service representative and the 24-hour service phone number for support.
