Sygonix SY-5231014 Fingerprint/RFID Access System

1. ບົດແນະນຳ

This manual provides essential information for the installation, operation, and maintenance of your Sygonix SY-5231014 Fingerprint/RFID Access System. This advanced access control unit features a vandal-proof metal housing, an illuminated keypad, and supports multiple access methods including fingerprint, RFID card, and PIN codes. It is designed for recessed installation and offers robust security with an IP55 rating, making it suitable for various indoor and outdoor applications. The system can manage up to 1000 users, including 10 designated visitors.

2. ຄໍາແນະນໍາຄວາມປອດໄພ

ກະລຸນາອ່ານ ແລະ ເຂົ້າໃຈຄຳແນະນຳດ້ານຄວາມປອດໄພທັງໝົດກ່ອນການຕິດຕັ້ງ ແລະ ການດຳເນີນງານ. ການບໍ່ປະຕິບັດຕາມຄຳແນະນຳເຫຼົ່ານີ້ອາດຈະເຮັດໃຫ້ເກີດໄຟຟ້າຊັອດ, ໄຟໄໝ້ ຫຼື ຄວາມເສຍຫາຍຕໍ່ອຸປະກອນ.

• ຄວາມປອດໄພທາງໄຟຟ້າ: Installation must be performed by a qualified electrician in accordance with all local and national electrical codes. Ensure power is disconnected before any wiring work.
• ການສະຫນອງພະລັງງານ: Use only a compatible 12V/DC or 18V/DC power supply. Incorrect voltage ສາມາດທໍາລາຍຫນ່ວຍງານ.
• ເງື່ອນໄຂສິ່ງແວດລ້ອມ: The unit has an IP55 rating, indicating protection against dust ingress and low-pressure water jets. Avoid direct exposure to heavy rain, submersion, or extreme temperatures.
• Vandalism Protection: While designed with a vandal-proof metal casing, extreme force can still cause damage.
• ບໍາລຸງຮັກສາ: ຢ່າພະຍາຍາມສ້ອມແປງເຄື່ອງດ້ວຍຕົນເອງ. ອ້າງອີງການບໍລິການທັງໝົດໃຫ້ກັບບຸກຄະລາກອນທີ່ມີຄຸນວຸດທິ.

3. ເນື້ອໃນຊຸດ

Carefully unpack the box and ensure all items listed below are present and undamaged. If any items are missing or damaged, contact your retailer immediately.

• Sygonix SY-5231014 Access System Unit
• Plastic Mounting Box (for recessed installation)
• screws ແລະ plugs
• 30 cm Connection Cable for Access Control
• ໄດໂອດ
• Hex Key (Allen wrench)
• ຄູ່ມືຜູ້ໃຊ້ (ເອກະສານນີ້)

4. ການຕິດຕັ້ງແລະການຕິດຕັ້ງ

The Sygonix SY-5231014 is designed for recessed installation. Proper installation is crucial for optimal performance and security.

4.1 ການຕິດຕັ້ງຫນ່ວຍງານ

1. ກະກຽມການເປີດ: Create an appropriate opening in the wall or mounting surface to accommodate the plastic mounting box. Ensure sufficient depth for the unit and wiring.
2. Install Mounting Box: Secure the plastic mounting box into the prepared opening using the provided screws and plugs. Ensure it is flush with the surface.
3. ເຊື່ອມຕໍ່ສາຍໄຟ: Refer to the wiring diagram (not provided in this text, refer to the full product manual for detailed diagrams) for connecting the power supply (12V/DC or 18V/DC), electric lock, and Wiegand interface if applicable. The included 30 cm cable facilitates these connections. Ensure all connections are secure and insulated.
4. Insert Diode: If connecting to an inductive load (e.g., an electric strike), install the provided diode across the lock terminals to protect the access controller from back-EMF.
5. Secure Main Unit: Carefully insert the main access control unit into the mounting box. Secure it using the provided screws, typically located on the front panel.

5. ຄໍາແນະນໍາການດໍາເນີນງານ

The Sygonix SY-5231014 offers various methods for granting access and managing users.

5.1 ການຄຸ້ມຄອງຜູ້ໃຊ້

The system supports up to 1000 users, comprising 990 general users and 10 visitor users. User access can be granted via PIN, RFID card, or fingerprint.

• ເພີ່ມຜູ້ໃຊ້: Access the programming mode (refer to the full manual for specific programming codes and sequences). Select the option to add a new user. Follow the prompts to register a PIN, scan an RFID card, or enroll a fingerprint.
• ການລຶບຜູ້ໃຊ້: In programming mode, select the option to delete a user. You may need to enter the user's ID or present their access credential to remove them from the system.
• Visitor Users: Visitor users typically have time-limited or single-use access. Configure these settings within the programming mode.

5.2 ການເຂົ້າເຖິງລະບົບ

• ການເຂົ້າເຖິງລະຫັດ PIN: Enter your registered PIN code on the illuminated keypad, then press the '#' key.
• ການເຂົ້າເຖິງບັດ RFID: Present your registered RFID card to the designated reader area on the unit.
• ການເຂົ້າເຖິງລາຍນິ້ວມື: Place your registered finger firmly on the fingerprint sensor.

Upon successful authentication, the relay will activate according to its configured mode (impulse or toggle), granting access.

5.3 Keypad Illumination

The keypad features illumination for improved visibility in low-light conditions. This feature is automatically active or can be configured within the system settings.

5.4 Relay Modes

The programmable relay can operate in either impulse or toggle mode:

• ໂໝດ Impulse: The relay activates for a short, configurable duration (e.g., 1-99 seconds) after successful authentication, typically used for electric strikes or momentary lock releases.
• ສະຫຼັບໂໝດ: The relay changes its state (ON to OFF, or OFF to ON) with each successful authentication, suitable for applications requiring a persistent state change, such as holding a door open until another authentication.

6. ບໍາລຸງຮັກສາ

Regular maintenance ensures the longevity and reliable operation of your access system.

• ທໍາຄວາມສະອາດ: ໃຊ້ອ່ອນ, ງamp cloth to clean the keypad and fingerprint sensor. Avoid abrasive cleaners, solvents, or excessive moisture. Ensure the fingerprint sensor is free of dirt and smudges for accurate readings.
• ການກວດກາ: Periodically check the unit for any signs of physical damage, loose connections, or wear.
• ອັບເດດຊອບແວ: ກວດເບິ່ງຜູ້ຜະລິດ webເວັບໄຊທ໌ສຳລັບການອັບເດດເຟີມແວທີ່ມີຢູ່ທີ່ອາດຈະປັບປຸງປະສິດທິພາບ ຫຼື ເພີ່ມຄຸນສົມບັດຕ່າງໆ.

7. ການແກ້ໄຂບັນຫາ

If you encounter issues with your Sygonix SY-5231014, refer to the following common problems and solutions.

• ໜ່ວຍບໍ່ເປີດ:
  ສາເຫດທີ່ເປັນໄປໄດ້: ບໍ່ມີສາຍໄຟ ຫຼືສາຍໄຟບໍ່ຖືກຕ້ອງ.
  ການແກ້ໄຂ: Verify the power supply is connected and providing the correct voltage (12V/DC or 18V/DC). Check all wiring connections for continuity and proper polarity.
• Access Denied (PIN/Card/Fingerprint):
  ສາເຫດທີ່ເປັນໄປໄດ້: Incorrect PIN, unregistered card/fingerprint, or sensor obstruction.
  ການແກ້ໄຂ: Ensure the correct PIN is entered. Verify the RFID card or fingerprint is registered in the system. Clean the fingerprint sensor thoroughly. Re-enroll fingerprint if issues persist.
• ປຸ່ມກົດບໍ່ຕອບສະໜອງ:
  ສາເຫດທີ່ເປັນໄປໄດ້: System freeze or internal fault.
  ການແກ້ໄຂ: Disconnect power to the unit for 30 seconds, then reconnect to perform a soft reset. If the issue persists, contact technical support.
• ປະຕູບໍ່ໄດ້ປົດລັອກ:
  ສາເຫດທີ່ເປັນໄປໄດ້: Lock malfunction, incorrect relay settings, or wiring issue.
  ການແກ້ໄຂ: Check the electric lock for proper function. Verify the relay mode (impulse/toggle) and duration settings. Inspect wiring between the access unit and the lock.
• ການສ່ອງແສງບໍ່ເຮັດວຽກ:
  ສາເຫດທີ່ເປັນໄປໄດ້: Feature disabled or internal fault.
  ການແກ້ໄຂ: Check system settings to ensure keypad illumination is enabled. If enabled and still not working, contact technical support.

8. ຂໍ້ມູນຈໍາເພາະ

9. ການຮັບປະກັນແລະການສະຫນັບສະຫນູນ

For warranty information, technical support, or service inquiries, please refer to the contact details provided with your purchase documentation or visit the official Sygonix webເວັບໄຊ. ຮັກສາຫຼັກຖານການຊື້ຂອງທ່ານສໍາລັບການຮ້ອງຂໍການຮັບປະກັນ.