Onforu 5-Head 70W Motion Sensor Outdoor Flood Light User Manual

1. ຜະລິດຕະພັນເກີນview

The Onforu 5-Head 70W Motion Sensor Outdoor Flood Light (Model BDBS70G-5) is a hardwired LED security light designed for outdoor use. It features five adjustable light heads, a built-in motion sensor, and provides 7000 lumens of daylight white illumination. The robust IP65 waterproof design ensures durability in various weather conditions, making it suitable for driveways, garages, gardens, and other outdoor areas.

2. ຂໍ້ມູນຄວາມປອດໄພ

• ຄວາມປອດໄພທາງໄຟຟ້າ: Installation must be performed by a qualified electrician or a person with sufficient electrical knowledge. Ensure power is turned off at the circuit breaker before installation, wiring, or maintenance.
• ການຕໍ່ດິນ: This fixture must be properly grounded to prevent potential electrical shock.
• ສະບັບtage: ຮັບປະກັນການສະຫນອງພະລັງງານ voltage ກົງກັບຄວາມຕ້ອງການຂອງໂຄມໄຟ (120 ໂວນ).
• ການນໍາໃຊ້ກາງແຈ້ງ: Designed for outdoor use. Ensure all connections are sealed and waterproofed according to local electrical codes.
• ຄວາມຮ້ອນ: LED lights can generate heat. Do not touch the light heads immediately after operation.
• ການປົກປ້ອງຕາ: Avoid looking directly into the LED light source when illuminated, as it can cause eye strain or damage.

3. ເນື້ອໃນຊຸດ

ກວດ​ສອບ​ວ່າ​ອົງ​ປະ​ກອບ​ທັງ​ຫມົດ​ແມ່ນ​ມີ​ຢູ່​ກ່ອນ​ທີ່​ຈະ​ເລີ່ມ​ຕົ້ນ​ການ​ຕິດ​ຕັ້ງ​:

• Onforu 5-Head Motion Sensor Flood Light (x1)
• ວົງເລັບຕິດ (x1)
• Screws ຍຶດແລະຍຶດຕິດຝາ
• ແກ່ນເຫຼັກ (x3)
• ຄູ່ມືຜູ້ໃຊ້ (x1)
• LED Lens (Included as part of the fixture)

4. ການຕິດຕັ້ງແລະການຕິດຕັ້ງ

This flood light is designed for hardwired installation. Follow these steps carefully:

1. ປິດໄຟ: Before starting, ensure the power to the installation area is turned off at the main circuit breaker.
2. ກະກຽມສາຍໄຟ: Identify the Live (Black), Neutral (White), and Ground (Green/Bare Copper) wires from your electrical box.
3. ວົງເລັບຕິດຕໍ່: Secure the mounting bracket to the desired surface (wall, soffit, or pillar) using the provided screws and anchors. Ensure it is firmly attached.
4. ການເຊື່ອມຕໍ່ສາຍ: Connect the fixture's wires to your household wiring using the provided wire nuts:
   • Black (Fixture) to Black (Household - Live)
   • White (Fixture) to White (Household - Neutral)
   • Green (Fixture) to Green/Bare Copper (Household - Ground)
5. Secure Fixture: Carefully tuck the wires into the junction box and attach the light fixture to the mounting bracket. Ensure a tight seal to prevent water ingress.
6. ປັບ​ຫົວ​ແສງ​: Once mounted, adjust the five individual light heads to cover the desired area. Each head can be rotated to direct light as needed.
7. ຟື້ນຟູພະລັງງານ: ເປີດໄຟຄືນຢູ່ທີ່ຕົວຕັດວົງຈອນ.

ຄວາມສູງການຕິດຕັ້ງທີ່ແນະນຳ: 6.5 - 13.1 feet (2 - 4 meters) above the ground for optimal motion detection and lighting coverage.

Figure 4.1: Hardwired Installation Diagram. This image illustrates the wiring connections (Live, Neutral, Ground) and how the fixture attaches to the mounting bracket on a wall.

Figure 4.2: Various Mounting Options. The image displays the flood light installed in three common configurations: under a soffit, on a wall, and on a pillar, demonstrating its versatility.

5. ຄໍາແນະນໍາການດໍາເນີນງານ

The Onforu flood light is designed for automatic operation based on motion detection and ambient light levels.

• ການກະຕຸ້ນການເຄື່ອນໄຫວ: The built-in PIR motion sensor detects movement within its sensing range. When motion is detected, the light will automatically turn on for the set duration.
• ຫົວ​ແສງ​ປັບ​ໄດ້​: The five light heads can be independently adjusted to direct light precisely where needed, providing broad and customizable illumination.

Figure 5.1: Wide Area Illumination. This image demonstrates the extensive coverage area (up to 1230 sq.ft.) provided by the adjustable 5-head design, illuminating a large backyard at night.

Figure 5.2: Motion Activated Lighting. The image illustrates the motion sensor's functionality, showing a person triggering the light within its 180-degree sensing angle and up to 72.17ft detection distance.

6. Motion Sensor Settings

The motion sensor features adjustable controls for customization:

• ໄລຍະການກວດຫາ: Adjustable from approximately 19 feet to 72 feet (6 meters to 22 meters).
• ຮູບແບບການເຮັດວຽກ:
  • "+" Mode: Light will be triggered both day and night when motion is detected.
  • "-" Mode: Light will only be triggered at night when motion is detected.
• ໂມງຈັບເວລາ: Adjustable duration for how long the light stays on after motion detection, typically from 1 to 10 minutes.

Figure 6.1: Motion Sensor Controls. This image shows the three adjustment knobs on the motion sensor for setting detection range, operating mode (day/night), and illumination duration (timer).

Figure 6.2: Flexible Light Panels and Adjustable Motion Sensor. This image highlights the design features, including the ability to adjust the angle of the five light panels and the motion sensor for optimal coverage.

7. ບໍາລຸງຮັກສາ

ການບຳລຸງຮັກສາເປັນປະຈຳຮັບປະກັນປະສິດທິພາບທີ່ດີທີ່ສຸດ ແລະ ອາຍຸການໃຊ້ງານທີ່ຍາວນານຂອງໄຟສ່ອງສະຫວ່າງຂອງທ່ານ.

• ທໍາຄວາມສະອາດ: Periodically clean the light heads and motion sensor lens with a soft, damp cloth to remove dirt, dust, or debris that may obstruct light output or sensor function. Do not use abrasive cleaners.
• ການກວດກາ: Annually inspect the wiring and mounting for any signs of wear, damage, or loosening. Ensure all seals remain intact to maintain IP65 waterproof rating.
• ບໍ່ມີສ່ວນທີ່ຜູ້ໃຊ້ບໍລິການ: The LED components are integrated and not user-replaceable. Do not attempt to disassemble the light heads.

Figure 7.1: IP65 Waterproof Design. This image visually confirms the light's resistance to water, snow, heat, and dust, highlighting its suitability for outdoor environments.

8. ການແກ້ໄຂບັນຫາ

If you encounter issues with your Onforu flood light, refer to the following common troubleshooting steps:

• ແສງບໍ່ເປີດ:
  • Check if the power supply is active at the circuit breaker.
  • ກວດສອບການເຊື່ອມຕໍ່ສາຍໄຟທັງໝົດແມ່ນປອດໄພ ແລະຖືກຕ້ອງ.
  • Ensure the motion sensor is set to the correct working mode (e.g., "+" for day/night, "-" for night only).
  • Adjust the ambient light sensor sensitivity if the light is not activating in low light conditions.
• ແສງຕິດຢູ່ຢ່າງຕໍ່ເນື່ອງ:
  • Check if the motion sensor is detecting constant movement (e.g., tree branches, pets). Adjust the sensor angle or sensitivity.
  • Ensure the timer setting is not set to its maximum duration or a continuous mode if available.
• Light Flashes or Cycles On/Off:
  • This could indicate an unstable power supply or a faulty connection. Recheck wiring.
  • ໃຫ້ແນ່ໃຈວ່າເລນເຊັນເຊີການເຄື່ອນໄຫວສະອາດ ແລະ ບໍ່ມີສິ່ງກີດຂວາງ.
• ເຊັນເຊີການເຄື່ອນໄຫວບໍ່ກວດພົບ:
  • Increase the detection range setting on the sensor.
  • Ensure the sensor is not obstructed and is facing the desired detection area.
  • Verify the installation height is within the recommended range for optimal detection.

If these steps do not resolve the issue, please contact Onforu customer support for further assistance.

9. ຂໍ້ມູນຈໍາເພາະ

Figure 9.1: Product Dimensions. This image provides a detailed view of the flood light with its key measurements in both millimeters and inches.

10. ການຮັບປະກັນແລະການສະຫນັບສະຫນູນ

This Onforu product comes with a limited warranty. For specific warranty details, please refer to the documentation included with your purchase or visit the official Onforu webເວັບໄຊ.

For technical support, troubleshooting assistance, or any questions regarding your product, please contact Onforu customer service. Contact information can typically be found on the product packaging or the official Onforu webເວັບໄຊ.