ແນະນຳ
The CAD Audio WX1000HH is a frequency agile UHF wireless handheld microphone system designed for clear and reliable audio transmission. Operating in the 510-570mHz frequency band, it offers 100 selectable channels to ensure optimal signal clarity and minimize interference. This system features convenient auto-scan and IR sync functions for quick setup and channel changes. Built with durable all-metal construction, the WX1000HH is suitable for various demanding environments. This manual provides essential information for setting up, operating, and maintaining your wireless microphone system.
ເນື້ອໃນຊຸດ
ກະລຸນາກວດສອບວ່າລາຍການທັງຫມົດທີ່ລະບຸໄວ້ຂ້າງລຸ່ມນີ້ແມ່ນລວມຢູ່ໃນຊຸດຂອງທ່ານ:
- WX1000HH Handheld Microphone Transmitter
- WX1000 UHF Wireless Receiver
- Power Adapter for Receiver
- ໄມໂຄຣໂຟນ Clip
- Rack Mount Hardware
- Antenna Relocation Kit
- Audio Cable (likely 1/4" TS to 1/4" TS or XLR to 1/4" TS)
- ຄູ່ມືຜູ້ໃຊ້ (ເອກະສານນີ້)
ຮູບພາບ 1: All components of the CAD Audio WX1000HH system, including the handheld microphone, receiver, power adapter, microphone clip, rack mount hardware, antenna relocation kit, and an audio cable.
ຕັ້ງຄ່າ
1. ການຕັ້ງຄ່າຕົວຮັບ
- ການຈັດວາງ: Position the WX1000 receiver on a stable, flat surface or install it into a standard equipment rack using the included rack mount hardware. Ensure adequate ventilation around the unit.
- ການເຊື່ອມຕໍ່ເສົາອາກາດ: Connect the included antennas to the ANT connectors on the rear panel of the receiver. If rack-mounting, use the antenna relocation kit to position the antennas for optimal reception.
- ການເຊື່ອມຕໍ່ພະລັງງານ: Connect the supplied power adapter to the DC INPUT on the rear of the receiver and then plug it into a suitable AC power outlet.
- ສຽງອອກ: Connect the receiver's audio output (Balanced XLR or Unbalanced 1/4" TS) to your mixer, amplifier, or PA system using an appropriate audio cable.
ຮູບພາບ 2: The WX1000 UHF Wireless Receiver shown with rack mount ears attached, ready for installation into an equipment rack.
ຮູບພາບ 3: Rear panel of the WX1000 receiver, showing the ANT connectors, Balanced XLR output, Unbalanced 1/4" TS output, and DC INPUT for power.
2. Handheld Microphone Setup
- ການຕິດຕັ້ງຫມໍ້ໄຟ: Unscrew the bottom cap of the handheld microphone. Insert two fresh AA batteries, observing the correct polarity (+/-) as indicated inside the battery compartment.
- ຫມວກທີ່ປອດໄພ: Screw the bottom cap back onto the microphone securely.
ຮູບພາບ 4: The CAD Audio WX1000HH handheld microphone with its bottom cap removed, revealing the battery compartment for two AA batteries.
ຄໍາແນະນໍາການດໍາເນີນງານ
1. ເປີດ / ປິດພະລັງງານ
- ຜູ້ຮັບ: Press the Power button on the front panel of the receiver. The display will illuminate.
- ໄມໂຄຣໂຟນມືຖື: Press and hold the power button on the microphone body until the display illuminates.
2. Channel Selection and Synchronization (IR Sync)
The WX1000HH system features 100 switchable UHF frequencies and an auto-scan function to find clear channels. Up to 20 systems can be used simultaneously.
- ສະແກນອັດຕະໂນມັດ: On the receiver, press the "SET" button to initiate an auto-scan. The receiver will search for and select an available, interference-free frequency.
- IR Sync: Once the receiver has selected a frequency, align the IR window on the handheld microphone with the IR sensor on the receiver (usually near the display). Press the "IR Sync" or "SET" button on the receiver (refer to receiver display for specific prompt). The frequency information will be transmitted to the microphone, synchronizing the two units.
- ການຢັ້ງຢືນ: Confirm that the frequency displayed on the microphone matches the frequency on the receiver.
ຮູບພາບ 5: Close-up of the CAD Audio WX1000HH handheld microphone's display, showing frequency and battery level indicators.
3. ຕົວຊີ້ວັດລະດັບແບັດເຕີຣີ
Both the handheld microphone transmitter and the receiver feature battery level indicators. Monitor these indicators to ensure uninterrupted operation. The handheld microphone provides over 12 hours of operation with two AA batteries.
4. ຂອບເຂດການປະຕິບັດ
The system offers an operating range of up to 295 feet (90 meters) between the transmitter and receiver under optimal conditions. Environmental factors, obstacles, and other wireless devices can affect this range.
5. ການນຳໃຊ້ທີ່ແນະນຳ
This system is suitable for various applications including singing, speech, and karaoke.
ບໍາລຸງຮັກສາ
- ທໍາຄວາມສະອາດ: Use a soft, dry cloth to clean the exterior of the receiver and microphone. Do not use liquid cleaners or solvents.
- ການປ່ຽນແບັດເຕີຣີ: Replace AA batteries in the handheld microphone when the low battery indicator appears. Always use fresh, high-quality batteries. Remove batteries if the microphone will not be used for an extended period.
- ການເກັບຮັກສາ: ເກັບຮັກສາລະບົບໄວ້ໃນບ່ອນທີ່ເຢັນ, ແຫ້ງ, ຫ່າງຈາກແສງແດດໂດຍກົງແລະອຸນຫະພູມທີ່ສຸດ.
ການແກ້ໄຂບັນຫາ
| ບັນຫາ | ສາເຫດທີ່ເປັນໄປໄດ້ | ການແກ້ໄຂ |
|---|---|---|
| ບໍ່ມີສຽງຈາກໄມໂຄຣໂຟນ |
|
|
| ການແຊກແຊງຫຼືສະຖິດ |
|
|
| ໄລຍະປະຕິບັດງານສັ້ນ |
|
|
ຂໍ້ມູນຈໍາເພາະ
| ຕົວແບບ | WX1000HH |
| ຕົວປະກອບແບບຟອມໄມໂຄຣໂຟນ | ມືຖື |
| ແຖບຄວາມຖີ່ | UHF (510-570 MHz) |
| ຈໍານວນຊ່ອງ | 100 (Frequency Agile) |
| ຊ່ວງການດໍາເນີນງານ | ສູງເຖິງ 295 ຟຸດ (90 ແມັດ) |
| ແຫຼ່ງພະລັງງານໄມໂຄຣໂຟນ | 2 x AA ຫມໍ້ໄຟ |
| ຊີວິດຫມໍ້ໄຟໄມໂຄຣໂຟນ | > 12 ຊົ່ວໂມງ |
| ວັດສະດຸ | Metal (Receiver), Metal (Microphone) |
| ອັດຕາສ່ວນສັນຍານເຖິງສຽງດັງ | 75 dB |
| ເຕັກໂນໂລຊີການເຊື່ອມຕໍ່ | XLR (Balanced), 1/4" TS (Unbalanced) |
| ຂະໜາດຜະລິດຕະພັນ (ຕົວຮັບ) | 12.1 x 2.8 x 16 ນິ້ວ (L x W x H) |
| ນ້ໍາຫນັກລາຍການ | 4 ປອນ (ລະບົບ) |
| UPC | 631922109757 |
ການຮັບປະກັນແລະການສະຫນັບສະຫນູນ
For warranty information and technical support, please refer to the official CAD Audio webເວັບໄຊ ຫຼືຕິດຕໍ່ບໍລິການລູກຄ້າຂອງເຂົາເຈົ້າໂດຍກົງ. ຮັກສາໃບຮັບເງິນການຊື້ຂອງທ່ານໄວ້ເປັນຫຼັກຖານການຊື້ສໍາລັບການຮຽກຮ້ອງການຮັບປະກັນໃດໆ.
CAD Audio Official Webເວັບໄຊ: www.cadaudio.com
