ຄູ່ມື+

Outwell 651158

ANNATTO Cooker 2 Burners EN417 User Manual

ຍີ່ຫໍ້: Outwell

ແນະນຳ

Thank you for choosing the Outwell ANNATTO 2-Burner Cooker. This manual provides essential information for the safe and efficient operation, maintenance, and troubleshooting of your new cooker. Please read this manual thoroughly before use and retain it for future reference.

ຂໍ້ມູນຄວາມປອດໄພ

Always prioritize safety when operating gas appliances. Failure to follow these instructions could result in fire, explosion, property damage, personal injury, or death.

ສິນຄ້າເກີນview

The Outwell ANNATTO cooker is a portable two-burner gas stove designed for outdoor cooking. It features a compact design with integrated wind shields and individual burner controls.

Outwell ANNATTO 2-burner cooker with lid open, showing two burners and pot supports.

ຮູບທີ 1: The Outwell ANNATTO cooker with its lid open, revealing the two gas burners and the removable pot supports. The integrated side wind shields are also visible, extended outwards.

ລົງລຸ່ມ view of the Outwell ANNATTO 2-burner cooker with lid open, showing the grates and burners.

ຮູບທີ 2: A top-down perspective of the cooker with the lid fully open. This view clearly shows the two burner grates and the underlying burners, ready for cooking. The gas hose connection point is visible on the right side.

Outwell ANNATTO 2-burner cooker in closed position, showing the front panel with control knobs.

ຮູບທີ 3: The Outwell ANNATTO cooker in its closed and compact state. The front panel displays the two control knobs for the burners and the central latch mechanism, making it easy to transport.

Close-up of the control panel of the Outwell ANNATTO cooker, showing ignition button and burner knobs.

ຮູບທີ 4: ລາຍລະອຽດ view of the cooker's control panel. It highlights the individual burner control knobs, the red ignition button, and the power switch, providing clear access for operation.

ຂ້າງ view of the Outwell ANNATTO cooker showing the gas hose connection point.

ຮູບທີ 5: This image shows the side of the cooker with the gas hose connected to the appliance's inlet. The hose leads to the regulator, which would then connect to a gas cylinder, illustrating the setup for fuel supply.

ຕັ້ງຄ່າ

  1. ແກະກ່ອງ: Carefully remove the cooker from its packaging. Retain packaging for storage if desired.
  2. ຕຳແໜ່ງ: Place the cooker on a stable, level, non-combustible surface outdoors, away from any flammable materials, buildings, or vehicles. Ensure adequate clearance above and around the cooker.
  3. Open Lid and Wind Shields: Unlatch the lid and open it fully. Extend the side wind shields outwards to provide protection from wind.
  4. ເຊື່ອມຕໍ່ການສະຫນອງອາຍແກັສ:
    • Ensure both burner control knobs are in the "OFF" position.
    • Connect the gas hose (with regulator, if not integrated) to the cooker's gas inlet port. Ensure a secure, leak-free connection.
    • Connect the other end of the hose/regulator to your gas cylinder. Tighten all connections by hand, then use a wrench for a final snug fit if required, but do not overtighten.
  5. ການທົດສອບຮົ່ວ: Before first use and after every gas cylinder change, perform a leak test.
    • ປະສົມການແກ້ໄຂຂອງສ່ວນທີ່ເທົ່າທຽມກັນຂອງສະບູອາຫານແລະນ້ໍາ.
    • Apply the solution to all gas connections (cooker inlet, hose connections, regulator connection to cylinder).
    • ຄ່ອຍໆເປີດປ່ຽງກະບອກອາຍແກັສ.
    • If bubbles appear, there is a leak. Immediately close the gas cylinder valve and tighten the connection. Repeat the test. If leaks persist, do not use the cooker and contact customer support.

ຄໍາແນະນໍາການດໍາເນີນງານ

  1. ການ​ກະ​ກຽມ​ສໍາ​ລັບ​ການ​ໄຟ​ໄຫມ້​: Ensure the cooker is set up safely and the gas cylinder valve is open.
  2. Ignite a Burner:
    • Push in and slowly turn one burner control knob counter-clockwise to the "HIGH" position.
    • Immediately press the red ignition button repeatedly until the burner ignites.
    • If the burner does not ignite within 5 seconds, turn the control knob to "OFF", wait 5 minutes for gas to disperse, and then repeat the ignition process.
  3. ປັບໄຟ: Once ignited, adjust the flame by turning the control knob between "LOW" and "HIGH" settings. A stable blue flame is ideal.
  4. ປຸງ​ແຕ່ງ​ອາ​ຫານ: Place appropriate cookware on the pot supports over the lit burner.
  5. ປິດ: When finished cooking, turn the burner control knob clockwise to the "OFF" position. Close the valve on the gas cylinder. Allow the cooker to cool completely before handling or storing.

ບໍາລຸງຮັກສາ

Regular cleaning and maintenance will prolong the life of your cooker and ensure safe operation.

ການແກ້ໄຂບັນຫາ

ບັນຫາສາເຫດທີ່ເປັນໄປໄດ້ການແກ້ໄຂ
Burner ບໍ່ ignite.
  • ຖັງອາຍແກັສຫວ່າງເປົ່າ ຫຼື ວາວປິດ.
  • Gas hose kinked or blocked.
  • ເຄື່ອງຈູດໄຟບໍ່ເກີດໄຟໄໝ້.
  • ອາກາດຢູ່ໃນສາຍກ.າຊ.
  • Check gas level and open cylinder valve.
  • Straighten hose; check for obstructions.
  • Ensure igniter button is pressed firmly.
  • Purge air by attempting ignition a few times.
ແປວໄຟອ່ອນ ຫຼື ບໍ່ສະໝໍ່າສະເໝີ.
  • ຄວາມກົດດັນອາຍແກັສຕ່ໍາ.
  • Partially blocked burner port.
  • ກວດເບິ່ງລະດັບກະບອກອາຍແກັສ.
  • Clean burner ports (ensure cooker is cool and off).
ກິ່ນອາຍແກັສ.
  • ແກັດຮົ່ວ.
  • ການເຜົາໃຫມ້ບໍ່ສົມບູນ.
  • Immediately turn off gas cylinder. Perform leak test. Do not use if leak persists.
  • Ensure adequate ventilation. Adjust flame.

For issues not listed here, or if troubleshooting steps do not resolve the problem, please contact Outwell customer support.

ຂໍ້ມູນຈໍາເພາະ

ການຮັບປະກັນແລະການສະຫນັບສະຫນູນ

Outwell products are manufactured to high quality standards and are warranted against defects in materials and workmanship. For specific warranty terms and conditions, please refer to the warranty card included with your product or visit the official Outwell webເວັບໄຊ.

For technical support, spare parts, or warranty claims, please contact Outwell customer service. Contact information can typically be found on the Outwell webເວັບໄຊ ຫຼືຢູ່ໃນໃບຮັບເງິນຊື້ຂອງທ່ານ.

Webເວັບໄຊ: www.outwell.com (ກະລຸນາກວດສອບການປ່ຽນແປງໃນພາກພື້ນ)