Perlegear Full Motion TV Wall Mount for 37-85 inch TVs, Model PGLF4

1. ບົດແນະນຳ

Thank you for choosing the Perlegear Full Motion TV Wall Mount, Model PGLF4. This manual provides essential information for the safe and correct installation, operation, and maintenance of your TV wall mount. Please read these instructions thoroughly before beginning installation and keep them for future reference.

2. ຂໍ້ມູນຄວາມປອດໄພ

WARNING: Failure to read and follow these instructions may result in personal injury, property damage, or voiding your warranty. If you do not understand these instructions or have doubts about the safety of the installation, please contact customer support or a qualified installer.

• This product is designed for installation on 12"/16" wood studs, solid concrete, or concrete block walls. ຢ່າຕິດຕັ້ງໃສ່ drywall ຢ່າງດຽວ.
• Ensure the wall structure can safely support the combined weight of the mount and your TV. The maximum weight capacity for this mount is 132 lbs (60 ກິ​ໂລ​).
• Verify your TV's VESA pattern and weight are within the specified limits before installation.
• Use only the mounting hardware provided. If any parts are missing or defective, contact Perlegear customer service.
• ໃຊ້ຕົວຊອກຫາສະແຕນສະແຕນສະແຕນເພື່ອຄົ້ນຫາສະແຕມໄມ້ຢ່າງຖືກຕ້ອງ.
• Do not overtighten screws, as this may cause damage and reduce the mount's stability.
• ຮັກສາເດັກນ້ອຍຢູ່ໄກໃນລະຫວ່າງການຕິດຕັ້ງ.

3. ເນື້ອໃນຊຸດ

Please check to ensure all components are included and undamaged:

• Wall Plate Assembly with Articulating Arms
• ຂາຕັ້ງໂທລະທັດ (2 ອັນ)
• ຊຸດອຸປະກອນຕິດຕັ້ງ (ສະກູຕ່າງໆ, ເຄື່ອງຊັກຜ້າ, ຊ່ອງຫວ່າງສຳລັບໂທລະພາບ ແລະຝາ)
• ລະດັບຟອງ
• ແມ່ແບບເຈາະ
• Cable Ties (Velcro straps)
• ຄູ່ມືການສອນ

4. ຄຸນລັກສະນະຂອງຜະລິດຕະພັນ

• ການກໍ່ສ້າງໜ້າວຽກໜັກ: Made from robust alloy steel, designed to securely hold TVs up to 132 lbs.
• ຄວາມເຂົ້າກັນໄດ້ຂອງໂທລະພາບກວ້າງ: Supports most 37-85 inch flat or curved TVs.
• ການປະຕິບັດຕາມ VESA: ເຂົ້າກັນໄດ້ກັບຮູບແບບ VESA ຕັ້ງແຕ່ 200x100 ມມ ຫາ 600x400 ມມ.
• Full Motion Adjustments:
  • Tool-Free Tilt: Adjust your TV 15° forward and 5° backward to reduce glare and optimize viewing.
  • ໝູນ: Swivel your TV up to 45° left or right for flexible viewມຸມ.
  • ການຂະຫຍາຍ ແລະ ການຫົດຄືນ: Extends up to 16.9 inches (43 cm) from the wall for immersive viewing and retracts to a slim 2.72 inches (6.9 cm) for a clean profile.
• ປັບປຸງຄວາມໝັ້ນຄົງ: Features durable articulating arms, anti-drop end caps, and security locks to keep your TV safely in place.
• ການປັບລະດັບຫຼັງການຕິດຕັ້ງ: Allows for a ±3° leveling adjustment after mounting to ensure a perfectly level screen.

5. ຄວາມເຂົ້າກັນໄດ້

Before installation, ensure your TV meets the following criteria:

• ຂະໜາດໂທລະພາບ: ເໝາະສຳລັບໂທລະທັດຂະໜາດ 37-85 ນິ້ວສ່ວນໃຫຍ່.
• ນ້ຳໜັກໂທລະທັດ: Your TV must weigh no more than 132 lbs (60 kg).
• ຮູບແບບ VESA: The mounting holes on the back of your TV must match one of the following VESA patterns: 200x100mm, 200x200mm, 300x200mm, 300x300mm, 400x200mm, 400x300mm, 400x400mm, 500x400mm, 600x400mm.
• ປະເພດຝາ: Suitable for 12"/16" wood stud walls, solid concrete walls, or concrete block walls. ຢ່າຕິດຕັ້ງໃສ່ drywall ຢ່າງດຽວ.

This image illustrates the wide compatibility of the mount, supporting TVs from 37 to 85 inches and various VESA patterns.

This diagram shows the supported wall types for installation: concrete, block walls, and 12-inch or 16-inch wood studs. It explicitly warns against mounting on drywall only.

6. ການຕິດຕັ້ງແລະການຕິດຕັ້ງ

Follow these general steps for installation. Refer to the detailed instructions provided in your package for specific diagrams and hardware usage.

6.1 ລາຍການກວດກ່ອນການຕິດຕັ້ງ

• Ensure you have all necessary tools (e.g., drill, stud finder, screwdriver, pencil).
• Confirm your TV and wall meet the compatibility requirements.
• Have a helper available, especially for lifting the TV.

6.2 ຂັ້ນຕອນການຕິດຕັ້ງ

1. Attach TV Brackets to Your TV: Secure the vertical TV brackets to the back of your television using the appropriate screws, washers, and spacers from the hardware kit. Ensure they are centered and securely fastened.
2. Mount the Wall Plate Assembly:
   • Use a stud finder to locate the center of your wood studs or mark the desired position on concrete/block walls.
   • Position the drilling template on the wall at your desired height and mark the pilot hole locations.
   • Drill pilot holes according to the instructions for your wall type.
   • Attach the wall plate assembly to the wall using the provided lag bolts and washers. Ensure it is level and securely tightened.
3. Hang Your TV: Carefully lift your TV (with attached brackets) and hook the brackets onto the wall plate assembly. Engage the security locks to prevent accidental dislodgement.

This image shows the use of the handy drilling template to mark precise locations for mounting screws on the wall, simplifying the installation process.

This image displays the Perlegear TV wall mount securely installed on a wall, highlighting its maximum weight capacity of 132 lbs.

7. ຄໍາແນະນໍາການດໍາເນີນງານ

Once installed, your Perlegear PGLF4 mount allows for various adjustments to achieve optimal viewing.

• ການປັບຕົວອຽງ: The mount features tool-free tilt. Locate the tilt adjustment levers on the TV brackets. Loosen them to adjust the TV's vertical angle (15° forward, 5° backward), then tighten to secure.
• ການປັບການຫມຸນ: Gently push or pull the TV to swivel it left or right (up to 45° in each direction) along the articulating arms.
• ການຂະຫຍາຍແລະການຖອນຄືນ: Extend the TV out from the wall by pulling it forward (up to 16.9 inches) or push it back towards the wall to retract (to 2.72 inches).
• ການປັບລະດັບຫຼັງການຕິດຕັ້ງ: If your TV appears slightly unlevel after installation, use the ±3° leveling adjustment feature to fine-tune its horizontal position. Refer to your detailed manual for specific instructions on how to access and use this feature.

This image demonstrates the mount's ability to tilt the TV +5° to -15° and swivel ±45°, providing the best view from any seat.

This image shows a hand utilizing the tool-free tilt mechanism, allowing for easy adjustment of the TV's vertical angle without additional tools.

This image illustrates the mount's extension capability, allowing the TV to be pulled out 16.9 inches from the wall and retracted to a compact 2.72 inches.

8. ບໍາລຸງຮັກສາ

ການບໍາລຸງຮັກສາເປັນປົກກະຕິຮັບປະກັນອາຍຸຍືນແລະການດໍາເນີນງານທີ່ປອດໄພຂອງເຄື່ອງຕິດຝາໂທລະພາບຂອງທ່ານ.

• ທໍາຄວາມສະອາດ: ເຊັດຕົວຍຶດດ້ວຍຜ້າອ່ອນໆແລະແຫ້ງເພື່ອເອົາຝຸ່ນອອກ. ຢ່າໃຊ້ນໍ້າຢາທໍາຄວາມສະອາດທີ່ມີສີຂັດ ຫຼື ຕົວລະລາຍ.
• ກວດສອບການເຊື່ອມຕໍ່: ກວດສອບສະກູ ແລະ ສະກູທັງໝົດເປັນໄລຍະເພື່ອຮັບປະກັນວ່າພວກມັນຍັງແໜ້ນຢູ່. ຂັນຄືນຖ້າຈຳເປັນ, ແຕ່ຢ່າຂັນເກີນໄປ.
• ກວດ​ສອບ​ການ​ເສຍ​ຫາຍ​: ກວດກາຕົວຍຶດເປັນປະຈຳເພື່ອເບິ່ງຮ່ອງຮອຍຂອງການສວມໃສ່, ຄວາມເສຍຫາຍ ຫຼື ການກັດກ່ອນ. ຖ້າພົບບັນຫາໃດໆ, ໃຫ້ຢຸດໃຊ້ ແລະ ຕິດຕໍ່ຝ່າຍຊ່ວຍເຫຼືອລູກຄ້າ.

9. ການແກ້ໄຂບັນຫາ

ຖ້າ​ຫາກ​ທ່ານ​ພົບ​ບັນ​ຫາ​ໃດ​ຫນຶ່ງ​ໃນ​ລະ​ຫວ່າງ​ຫຼື​ຫຼັງ​ຈາກ​ການ​ຕິດ​ຕັ້ງ​, ເບິ່ງ​ວິ​ທີ​ແກ້​ໄຂ​ທົ່ວ​ໄປ​ດັ່ງ​ຕໍ່​ໄປ​ນີ້​:

• ໂທລະພາບບໍ່ແມ່ນລະດັບ: Use the post-installation leveling adjustment feature (±3°) to correct the TV's horizontal alignment.
• ຄວາມຫຍຸ້ງຍາກໃນການເຄື່ອນຍ້າຍ / ປັບໂທລະພາບ: Ensure all adjustment levers and bolts are sufficiently loosened before attempting to move the TV. If the mount feels stiff, check for any obstructions or overtightened components.
• ພູເຂົາຮູ້ສຶກບໍ່ໝັ້ນຄົງ: Recheck all wall and TV connections. Ensure lag bolts are securely fastened into studs or appropriate anchors in concrete. Verify the TV's weight does not exceed the mount's capacity.
• ຊິ້ນສ່ວນທີ່ຂາດຫາຍໄປ: If any parts are missing from your package, contact Perlegear customer support immediately.

10. ຂໍ້ມູນຈໍາເພາະ

11. ການຮັບປະກັນແລະການສະຫນັບສະຫນູນ

Perlegear provides a limited warranty for this product. For detailed warranty information, please refer to the warranty card included in your package or visit the official Perlegear webເວັບໄຊ.

Should you have any issues or questions, please do not hesitate to contact us:

• ສະຫະລັດ/CA: 1-800-456-5231 (Mon-Fri, 8am-8pm CST)
• UK/DE: 44-808-196-4165 (Mon-Fri, 2pm-10pm UTC)
• ອີເມວ: support@perlegear.com
• Webເວັບໄຊ: www.perlegear.com