WANLUTECH LT-40 Mini Laser Distance Meter Instruction Manual

1. ບົດແນະນຳ

Thank you for choosing the WANLUTECH LT-40 Mini Laser Distance Meter. This compact and versatile tool is designed for accurate distance, area, and volume measurements, featuring multiple measurement modes and a clear LCD backlight. This manual provides essential information for safe and effective use of your device.

2. ຜະລິດຕະພັນເກີນview

2.1 ລັກສະນະທີ່ສໍາຄັນ

Multiple Measurement Modes: Includes single, continuous, area, volume, and Pythagorean measurements.
Compact Design: Small size (5.6 x 1.2 x 2.1 cm) and lightweight (28g) with an aluminum alloy housing for portability.
Long Measuring Distance: Measures up to 131ft (40m).
USB Charging: Convenient micro-USB charging port.
LCD Backlight: Ensures clear data readability in various lighting conditions.
Selectable Reference Points: Choose between front or rear reference for measurements.
Unit Conversion: Switch between meters (m), inches (in), and feet (ft).

2.2 Device Components and Display

The following diagram illustrates the main components and display indicators of the LT-40 Laser Distance Meter.

Diagram showing the WANLUTECH LT-40 laser measure with labels for its buttons and display features, including single measurement, area measurement, front/back benchmark switch, continuous measurement, volumetric measurement, functions switch, Pythagorean measurement, power on, one key measurement, and power off/backlit button.

Figure 1: LT-40 Device Layout and Function Buttons

ລະອຽດ view of the WANLUTECH LT-40 laser measure display, indicating laser mode, front and rear reference points, battery indicator, laser strength, maximum value, minimum value, and current measurement value. Dimensions of 56mm length and 22mm width are also shown.

Figure 2: LT-40 Display Indicators and Dimensions

ປຸ່ມຫຼັກ: Used for power on, single measurement, and confirming selections.
ປຸ່ມ F/R: Functions switch / Front-Rear reference switch.
Power Off / Backlit Button: Turns the device off and controls the LCD backlight.
ຈໍສະແດງຜົນ: Shows measurement values, units, battery status, laser strength, and measurement mode icons.

3. ຕັ້ງຄ່າ

3.1 ການສາກອຸປະກອນ

The LT-40 features a built-in Lithium-Ion battery and is rechargeable via a micro-USB port.

Connect the provided micro-USB cable to the device's charging port.
ເຊື່ອມຕໍ່ປາຍອື່ນໆຂອງສາຍ USB ກັບອະແດັບເຕີໄຟ USB ມາດຕະຖານ (ບໍ່ລວມ) ຫຼືພອດ USB ຂອງຄອມພິວເຕີ.
The battery indicator on the display will show charging status. Charge fully before first use.

Image showing the WANLUTECH LT-40 laser measure connected via a micro-USB cable for charging, with a battery icon indicating USB charging.

Figure 3: USB Charging Port

3.2 Powering On/Off and Backlight

ເປີດ: ກົດປຸ່ມຕົ້ນຕໍສັ້ນ.
ປິດພະລັງງານ: Long press the Power Off / Backlit button.
ການຄວບຄຸມໄຟຫຼັງ: Short press the Power Off / Backlit button to toggle the LCD backlight on or off.

Close-up of the WANLUTECH LT-40 laser measure's LCD screen with backlight activated, displaying measurement data clearly in a dark environment.

Figure 4: LCD Backlight in Operation

3.3 Setting Measurement Reference Point

The device allows you to choose the measurement reference point:

Front Reference: Measurements are taken from the front edge of the device. The device's length is not included in the result.
Rear Reference: Measurements are taken from the rear edge of the device. The device's length is included in the result.

To switch between reference points, short press the F/R button. An icon on the display will indicate the currently selected reference point.

3.4 ການປ່ຽນແປງຫນ່ວຍວັດແທກ

The LT-40 supports meters (m), inches (in), and feet (ft).

To cycle through units, long press the F/R button. The unit displayed on the screen will change accordingly.

4. Operation - Measurement Modes

The LT-40 offers various measurement functions. To switch between modes, short press the F/R button until the desired mode icon appears on the display.

4.1 ການວັດແທກດຽວ

Measures the direct distance between the device and a target.

ເປີດອຸປະກອນ.
ຊີ້ເລເຊີໄປທີ່ເປົ້າໝາຍທີ່ຕ້ອງການ.
Short press the main button to emit the laser.
Short press the main button again to take the measurement. The result will be displayed instantly.

Illustration of single distance measurement using the WANLUTECH LT-40 laser measure, showing a single laser line extending to a wall.

Figure 5: Single Measurement

4.2 ການວັດແທກຢ່າງຕໍ່ເນື່ອງ (ການຕິດຕາມ)

Measures distances continuously as the device is moved, displaying real-time maximum and minimum values.

ເປີດອຸປະກອນ.
Long press the main button for approximately 1 second to enter continuous measurement mode.
Move the device slowly. The display will update with real-time measurements, showing MAX and MIN values.
Short press the main button again to exit continuous measurement mode.

Illustration of continuous measurement using the WANLUTECH LT-40 laser measure, showing multiple laser points as the device is moved.

Figure 6: Continuous Measurement

4.3 ການວັດແທກພື້ນທີ່

Calculates the area of a rectangular surface by measuring two sides.

Select the Area Measurement mode (icon: rectangle).
Short press the main button to measure the first side (e.g., length).
Short press the main button again to measure the second side (e.g., width).
ອຸປະກອນຈະຄິດໄລ່ອັດຕະໂນມັດແລະສະແດງພື້ນທີ່.

Illustration of area measurement using the WANLUTECH LT-40 laser measure, showing two measurements (length and width) used to calculate a shaded area.

Figure 7: Area Measurement

4.4 ການວັດແທກປະລິມານ

Calculates the volume of a space by measuring three dimensions.

Select the Volume Measurement mode (icon: cube).
Short press the main button to measure the first dimension (e.g., length).
Short press the main button again to measure the second dimension (e.g., width).
Short press the main button a third time to measure the third dimension (e.g., height).
ອຸປະກອນຈະຄິດໄລ່ ແລະ ສະແດງລະດັບສຽງໂດຍອັດຕະໂນມັດ.

Illustration of volume measurement using the WANLUTECH LT-40 laser measure, showing three measurements (length, width, height) used to calculate a shaded volume.

Figure 8: Volume Measurement

4.5 ການວັດແທກແບບປີທາໂກຣຽນ

Uses the Pythagorean theorem to calculate indirect distances.

Diagram illustrating the Primary Pythagorean mode on the WANLUTECH LT-40 laser measure, showing how two measurements (hypotenuse and one leg) are used to calculate the other leg of a right triangle. Also shows Secondary Pythagorean modes for data addition and subtraction.

Figure 9: Pythagorean Measurement Modes

4.5.1 Primary Pythagorean Mode (Indirect Height)

Calculates the height of an object (side 'a') by measuring the hypotenuse ('c') and the base ('b').

Select the Primary Pythagorean mode (icon: right triangle with 'a' unknown).
Short press the main button to measure the hypotenuse (data 'c').
Short press the main button again to measure the base (data 'b').
The device will automatically calculate and display the height (data 'a').

4.5.2 Secondary Pythagorean Mode (Data Addition)

Calculates a total height (a1+a2) by measuring two hypotenuses and two bases.

Select the Secondary Pythagorean mode (data addition) (icon: two right triangles stacked).
Short press the main button to measure the first hypotenuse (data 'c').
Short press the main button again to measure the first base (data 'b').
Short press the main button a third time to measure the second hypotenuse (data 'e').
The device will automatically calculate and display the total height (a1+a2).

4.5.3 Secondary Pythagorean Mode (Data Subtraction)

Calculates a height difference (a) by measuring two hypotenuses and two bases.

Select the Secondary Pythagorean mode (data subtraction) (icon: two right triangles overlapping).
Short press the main button to measure the first hypotenuse (data 'e').
Short press the main button again to measure the first base (data 'c').
Short press the main button a third time to measure the second base (data 'b').
The device will automatically calculate and display the height difference (data 'a').

5. ບໍາລຸງຮັກສາ

5.1 ການທໍາຄວາມສະອາດ

ເຊັດອຸປະກອນດ້ວຍຄວາມອ່ອນ, ງamp ຜ້າ. ຢ່າໃຊ້ເຄື່ອງເຮັດຄວາມສະອາດຂັດຫຼືສານລະລາຍ.
Keep the laser lens clean and free of dust or debris to ensure accurate measurements. Use a soft, lint-free cloth for the lens.

5.2 ການເກັບຮັກສາ

ເກັບຮັກສາອຸປະກອນໄວ້ໃນບ່ອນທີ່ເຢັນ, ແຫ້ງ, ຫ່າງຈາກແສງແດດໂດຍກົງ ແລະອຸນຫະພູມທີ່ຮ້າຍກາດ.
ຖ້າເກັບຮັກສາໄວ້ເປັນເວລາດົນ, ໃຫ້ຮັບປະກັນວ່າແບັດເຕີຣີໄດ້ຖືກສາກໄຟບາງສ່ວນແລ້ວ (ປະມານ 50%) ເພື່ອຍືດອາຍຸການໃຊ້ງານຂອງແບັດເຕີຣີ.

6. ການແກ້ໄຂບັນຫາ

If you encounter issues with your LT-40, please refer to the following common problems and solutions:

ບັນຫາ	ສາເຫດທີ່ເປັນໄປໄດ້	ການແກ້ໄຂ
ອຸປະກອນບໍ່ເປີດ	ແບັດເຕີຣີເຫຼືອໜ້ອຍ ຫຼື ບໍ່ມີສາກ	ສາກອຸປະກອນໂດຍໃຊ້ສາຍ USB.
ການວັດແທກບໍ່ຖືກຕ້ອງ	Laser lens is dirty; Unstable measurement surface; Incorrect reference point selected; Strong light interference.	Clean the laser lens; Ensure a stable surface; Verify the front/rear reference setting; Measure in a shaded area or use a target plate in bright conditions.
ຈໍສະແດງຜົນແມ່ນມືດມົວ ຫຼືອ່ານບໍ່ໄດ້	Backlight is off; Low battery.	Short press the Power Off / Backlit button to turn on the backlight; Charge the device.
ອຸປະກອນຄ້າງ ຫຼື ບໍ່ຕອບສະໜອງ	ຄວາມຜິດພາດຂອງຊອບແວຊົ່ວຄາວ.	Long press the Power Off / Backlit button to force a shutdown, then restart the device.

7. ຂໍ້ມູນຈໍາເພາະ

ຄຸນສົມບັດ	ຂໍ້ມູນຈໍາເພາະ
ຕົວແບບ	LT-40
ໄລຍະການວັດແທກ	ສູງເຖິງ 40 ແມັດ (131 ຟຸດ)
ໜ່ວຍ	m / ໃນ / ft
ຊັ້ນເລເຊີ	Class II, Output power <1mW
ປະເພດຫມໍ້ໄຟ	Lithium-Ion (rechargeable via Micro-USB)
ວັດສະດຸ	ໂລຫະປະສົມອາລູມິນຽມແລະ ABS
ສີ	ສີເທົາ
ຂະໜາດສິນຄ້າ	5.6 x 1.2 x 2.1 cm
ນ້ໍາຫນັກລາຍການ	28 g
ລະດັບຄວາມຕ້ານທານນ້ໍາ	ກັນນ້ຳໄດ້ (ລະດັບ IP54)

8. ການຮັບປະກັນແລະການສະ ໜັບ ສະ ໜູນ

WANLUTECH is dedicated to providing high-quality products and excellent customer service. For any questions, technical support, or warranty inquiries regarding your LT-40 Mini Laser Distance Meter, please contact our customer support team through the retailer where you purchased the product or visit the official WANLUTECH webເວັບໄຊສໍາລັບຂໍ້ມູນຕິດຕໍ່.

ກະລຸນາຮັກສາຫຼັກຖານການຊື້ຂອງທ່ານສໍາລັບການຮຽກຮ້ອງການຮັບປະກັນ.

	LT-300S Multi-function Network Cable Tester User Manual User manual for the WANLUTECH LT-300S Multi-function Network Cable Tester, detailing its features, interface, instructions for cable tracing, UTP/continuity testing, length measurement, port flashing, PoE detection, and optional optical power meter and visual fault locator functions.
	WANLUTECH Multi-function Tester Quick Guide Comprehensive quick guide for the WANLUTECH Multi-function Tester, covering OTDR functions, IP camera testing, laser source, optical power meter, visual fault locator, and various cable tests. Includes detailed operation, settings, specifications, and safety information for professional fiber optic and network technicians.
	WANLUTECH 8K IP Camera Tester (K15 Series) User Manual Comprehensive user manual for the WANLUTECH 8K IP Camera Tester (K15 Series). Covers installation, operation, and testing of IP, HD analog (8MP TVI/CVI/AHD/EX-SDI/SDI/CVBS), 8K H.265/4K H.264 cameras, network diagnostics, SFP, OPM, VFL, DMM, and more. Essential for CCTV and network installers.
	Johnson 40-6004 Laser Distance Measure Instruction Manual Comprehensive instruction manual for the Johnson 40-6004 Laser Distance Measure, detailing its features, operation, safety guidelines, technical specifications, and warranty information.
	Handy Laser Distance Meter 10050-20/10050-40 User Manual and Specifications Comprehensive guide for the Handy Laser Distance Meter models 10050-20 and 10050-40, covering operation, features, and technical specifications. Measure distance, area, and volume accurately.
	ຄູ່ມືຜູ້ໃຊ້ CONDTROL SMART 40 Laser Distance Meter User manual for the CONDTROL SMART 40 Laser Distance Meter, detailing its functions, specifications, operation, safety instructions, and warranty information.

WANLUTECH LT-40

WANLUTECH LT-40 Mini Laser Distance Meter User Manual