ແຮງດັນ AC ແບບບໍ່ຕິດຕໍ່ຂອງ Tolsentage Detector (Model: 38110) - Instruction Manual

1. ບົດແນະນຳ

This manual provides detailed instructions for the safe operation, maintenance, and troubleshooting of your Tolsen Non-Contact AC Voltage Detector, Model 38110. Please read this manual thoroughly before using the device to ensure proper function and safety.

ສິນຄ້າເກີນview

The Tolsen 38110 is a CE certified non-contact AC voltage detector designed for quick and safe identification of live AC voltage. It is manufactured according to CAT III (1000V) safety standards, making it suitable for a wide range of electrical applications. The device features a standard AC voltage detection range of 12V to 1000V at a frequency of 50-60Hz.

ຄຸນ​ນະ​ສົມ​ບັດ​ທີ່​ສໍາ​ຄັນ​ປະ​ກອບ​ມີ​:

• Audible and visual alarm modes (sound and light flash).
• Integrated white LED probe light for illumination in dark areas.
• Automatic power-off function to conserve battery life.
• ຕົວຊີ້ວັດແບັດເຕີຣີຕໍ່າ.
• Vol-Non-Contacttage (NCV) sensing with automatic selection of 3 sensitivity levels (high, medium, and low).
• Three types of frequency, sound, and LED alarm indications.

2. ຂໍ້ມູນຄວາມປອດໄພ

Always adhere to local safety regulations and guidelines when working with electrical systems. This device is designed to assist in detecting AC voltage, but it should not be used as the sole method for determining the presence of voltage. Always verify with a known live source before testing and a known de-energized source after testing.

• ຄຳເຕືອນ: Risk of electric shock. Do not use if the device appears damaged or is not functioning correctly.
• ຢ່າພະຍາຍາມວັດແທກ voltage beyond the specified range (1000V AC).
• Ensure batteries are correctly installed and replaced when the low battery indicator appears.
• ຮັກສາອຸປະກອນໃຫ້ແຫ້ງ ແລະສະອາດ.
• This device is for non-contact detection only. Do not touch live conductors with the probe tip.

3. ອົງປະກອບຂອງຜະລິດຕະພັນ

Familiarize yourself with the different parts of your Tolsen Non-Contact AC Voltage ເຄື່ອງກວດຈັບ:

ຮູບ 3.1: ດ້ານຫນ້າ view of the Tolsen 38110 Voltage Detector, showing the probe tip, LED indicators, and control buttons.

ຮູບທີ 3.2: ໄລຍະໃກ້ view highlighting the NCV sensitivity indicators (High, Medium, Low) and the power and flashlight buttons.

• ເຄັດລັບການສືບສວນ: ກວດພົບ AC voltage ໂດຍບໍ່ມີການຕິດຕໍ່.
• ຕົວຊີ້ວັດ LED: Visual indication of voltage presence and sensitivity level.
• ປຸ່ມເປີດປິດ: ເປີດ/ປິດອຸປະກອນ.
• ປຸ່ມໄຟສາຍ: Activates/deactivates the white LED probe light.
• ຊ່ອງໃສ່ຫມໍ້ໄຟ: Located at the bottom, for 2x AAA batteries.

4. ການຕິດຕັ້ງແລະການຕິດຕັ້ງຫມໍ້ໄຟ

ການຕິດຕັ້ງຫມໍ້ໄຟ

1. Twist and pull off the battery cap at the bottom of the detector.
2. ໃສ່ແບັດເຕີຣີ AAA 1.5V ສອງ (2) ກ້ອນ, ຮັບປະກັນວ່າຂົ້ວທີ່ຖືກຕ້ອງ (+/-).
3. Replace the battery cap, twisting it securely until it clicks into place.

The device will automatically perform a self-test upon power-on. If the low battery indicator illuminates, replace the batteries immediately for accurate readings.

5. ຄໍາແນະນໍາການດໍາເນີນງານ

ເປີດ/ປິດ

• ກົດ ປຸ່ມເປີດປິດ (usually marked with 'I' or a power symbol) to turn the detector ON.
• The device will emit a short beep and the LED indicators will flash briefly.
• To turn OFF, press and hold the ປຸ່ມເປີດປິດ until the device powers down, or it will automatically shut off after a period of inactivity.

ການໃຊ້ໄຟສາຍໄຟ

• ກົດ ປຸ່ມໄຟສາຍ (usually marked with a light bulb symbol) to turn the white LED probe light ON.
• Press the button again to turn the flashlight OFF.

Vol-Non-Contacttage (NCV) ການກວດຫາ

1. Ensure the detector is powered ON.
2. Place the probe tip near the wire, outlet, or electrical component you wish to test.
3. The detector will automatically select the appropriate sensitivity level (High, Medium, or Low) based on the detected voltagຄວາມເຂັ້ມແຂງຂອງອີ.
4. ຖ້າ AC voltage is detected, the device will emit an audible beep and the LED indicators will flash. The frequency of the beeps and flashes will increase with higher voltage or closer proximity to the source.
5. The LED indicators will also show the detected voltagລະດັບ e:
• ຕ່ຳ: Indicates a weaker signal or lower voltage.
• ປານກາງ: Indicates a moderate signal or voltage.
• ສູງ: Indicates a strong signal or higher voltage.

Always test the detector on a known live circuit before and after use to confirm its proper operation.

6. ຂໍ້ກໍານົດດ້ານວິຊາການ

Figure 6.1: Approximate dimensions of the Tolsen 38110 Voltage ເຄື່ອງກວດຈັບ.

7. ບໍາລຸງຮັກສາ

ທໍາຄວາມສະອາດ

Wipe the device with a dry, clean cloth. Do not use abrasive cleaners or solvents. Ensure no moisture enters the device.

ການປ່ຽນແບັດ

When the low battery indicator illuminates, replace the batteries as described in the "Setup and Battery Installation" section. Remove batteries if the device will not be used for an extended period to prevent leakage.

ການເກັບຮັກສາ

ເກັບຮັກສາເຄື່ອງກວດຈັບໄວ້ໃນບ່ອນທີ່ເຢັນ, ແຫ້ງ, ຫ່າງຈາກແສງແດດໂດຍກົງ ແລະອຸນຫະພູມທີ່ຮ້າຍກາດ.

8. ການແກ້ໄຂບັນຫາ

9. ການຮັບປະກັນແລະການສະຫນັບສະຫນູນ

Tolsen products are manufactured to high-quality standards. For warranty information or technical support, please refer to the warranty card included with your purchase or visit the official Tolsen webເວັບໄຊ. ຮັກສາໃບຮັບເງິນການຊື້ຂອງທ່ານໄວ້ເປັນຫຼັກຖານການຊື້ສໍາລັບການຮຽກຮ້ອງການຮັບປະກັນໃດໆ.

For further assistance, please contact Tolsen customer service.