1. ຜະລິດຕະພັນເກີນview
The Pokitter PKT-PTC1200 is a compact and efficient ceramic fan heater designed to provide rapid and comfortable warmth. Featuring advanced PTC ceramic heating technology, it offers energy-saving operation, multiple safety features, and a quiet, light-free heating experience. Its portable design makes it suitable for various indoor environments.
Figure 1.1: The Pokitter PKT-PTC1200 ceramic heater in operation, demonstrating its wide oscillation and warm air output.
2. ຂໍ້ມູນຄວາມປອດໄພ
ກະລຸນາອ່ານຄໍາແນະນໍາດ້ານຄວາມປອດໄພທັງໝົດຢ່າງລະອຽດກ່ອນທີ່ຈະໃຊ້ເຄື່ອງໃຊ້ໄຟຟ້ານີ້. ການບໍ່ປະຕິບັດຕາມຄໍາແນະນໍາເຫຼົ່ານີ້ອາດຈະເຮັດໃຫ້ເກີດໄຟຟ້າຊັອດ, ໄຟໄໝ້ ຫຼື ການບາດເຈັບສາຫັດ.
- ວາງເຄື່ອງເຮັດຄວາມຮ້ອນໄວ້ເທິງໜ້າດິນທີ່ແຂງ ແລະ ຮາບພຽງສະເໝີ.
- Do not cover the heater or block the air inlets/outlets.
- Keep flammable materials at least 1 meter (3 feet) away from the heater.
- Do not use in bathrooms, laundry areas, or similar wet locations.
- ຖອດເຄື່ອງເຮັດຄວາມຮ້ອນເມື່ອບໍ່ໃຊ້ ຫຼືກ່ອນທຳຄວາມສະອາດ.
- This appliance is equipped with an automatic tip-over switch and overheat protection for enhanced safety.
Figure 2.1: Key safety features of the PKT-PTC1200 heater, including rapid heat dissipation, automatic tip-over shut-off, overheat protection, and the use of flame-retardant ABS material.
3. ຕັ້ງຄ່າ
Setting up your Pokitter ceramic heater is quick and easy.
- ແກະກ່ອງ: ເອົາເຄື່ອງເຮັດຄວາມຮ້ອນອອກຈາກເຄື່ອງຫຸ້ມຫໍ່ຂອງມັນຢ່າງລະມັດລະວັງ. ຮັກສາການຫຸ້ມຫໍ່ສໍາລັບການເກັບຮັກສາຫຼືການຂົນສົ່ງໃນອະນາຄົດ.
- ການຈັດວາງ: Place the heater on a stable, flat, and heat-resistant surface. Ensure there is at least 1 meter (3 feet) of clear space around the heater to allow for proper airflow and prevent overheating.
- ການເຊື່ອມຕໍ່ພະລັງງານ: ສຽບສາຍໄຟເຂົ້າໄປໃນປ່ຽງໄຟຟ້າມາດຕະຖານ. ຮັບປະກັນ voltage matches the heater's requirements (refer to specifications).
Figure 3.1: The heater and its packaging, ready for setup.
4. ຄໍາແນະນໍາການດໍາເນີນງານ
The Pokitter PKT-PTC1200 heater features intuitive controls for ease of use.
4.1 ເປີດ/ປິດ
Press the power button on the top panel to turn the heater on or off. The heater will begin operating in the last used mode or default to a low heat setting.
Figure 4.1: Operating the control panel on the top of the heater.
4.2 ການຕັ້ງຄ່າຄວາມຮ້ອນ
ເຄື່ອງເຮັດຄວາມຮ້ອນມີສາມການຕັ້ງຄ່າຄວາມຮ້ອນ:
- Fan Only (7W): ໄຫຼວຽນຂອງອາກາດໂດຍບໍ່ມີຄວາມຮ້ອນ.
- ຄວາມຮ້ອນຕໍ່າ (700W): Provides gentle warmth for smaller spaces or energy saving.
- ຄວາມຮ້ອນສູງ (1200W): Delivers maximum warmth for quick heating of larger areas.
Cycle through the settings using the mode button on the control panel.
Figure 4.2: The heater's three power modes and 80-degree oscillation feature.
4.3 ຟັງຊັນ Oscillation
Press the oscillation button to activate the 80-degree wide-angle oscillation, distributing heat more evenly across the room. Press again to stop oscillation.
Figure 4.3: The heater's oscillation feature in action.
4.4 ຟັງຊັນຈັບເວລາ
The built-in 12-hour timer allows you to set the heater to automatically turn off after a specified period. Press the timer button repeatedly to select the desired duration.
Figure 4.4: The 12-hour timer function for convenient operation.
5. ບໍາລຸງຮັກສາ
ການບໍາລຸງຮັກສາເປັນປົກກະຕິຮັບປະກັນປະສິດທິພາບທີ່ດີທີ່ສຸດແລະອາຍຸຍືນຂອງເຄື່ອງເຮັດຄວາມຮ້ອນຂອງທ່ານ.
- ທໍາຄວາມສະອາດ: Before cleaning, always unplug the heater and allow it to cool down completely. Use a soft, damp ຜ້າເຊັດພື້ນຜິວພາຍນອກ. ຢ່າໃຊ້ເຄື່ອງເຮັດຄວາມສະອາດຂັດຫຼືສານລະລາຍ.
- ການເກັບຮັກສາ: ເມື່ອບໍ່ໄດ້ໃຊ້, ໃຫ້ເກັບຮັກສາເຄື່ອງເຮັດຄວາມຮ້ອນໄວ້ໃນບ່ອນທີ່ເຢັນ, ແຫ້ງ, ດີກວ່າຢູ່ໃນການຫຸ້ມຫໍ່ຕົ້ນສະບັບຂອງມັນ, ເພື່ອປົກປ້ອງມັນຈາກຝຸ່ນແລະຄວາມເສຍຫາຍ.
- ຊ່ອງສຽບອາກາດ / Outlet: Periodically check and clean the air inlets and outlets to ensure they are free from dust and debris, which can impede airflow and reduce efficiency.
6. ການແກ້ໄຂບັນຫາ
ຖ້າທ່ານພົບບັນຫາກັບເຄື່ອງເຮັດຄວາມຮ້ອນຂອງທ່ານ, ໃຫ້ອ້າງອີງເຖິງບັນຫາທົ່ວໄປຕໍ່ໄປນີ້ແລະວິທີແກ້ໄຂ:
| ບັນຫາ | ສາເຫດທີ່ເປັນໄປໄດ້ | ການແກ້ໄຂ |
|---|---|---|
| ເຄື່ອງເຮັດຄວາມຮ້ອນບໍ່ເປີດ. | ບໍ່ມີໄຟຟ້າ, ສະວິດການພິກເປີດຢູ່, ຫຼື ການປ້ອງກັນຄວາມຮ້ອນເກີນເປີດຢູ່. | Check power cord connection. Ensure heater is upright. Unplug and allow to cool for 30 minutes before restarting. |
| ບໍ່ມີຜົນຜະລິດຄວາມຮ້ອນ. | Fan-only mode selected, or heating element issue. | Ensure a heat mode (700W or 1200W) is selected. If problem persists, contact customer support. |
| ເຄື່ອງເຮັດຄວາມຮ້ອນຢຸດໂດຍບໍ່ຄາດຄິດ. | ເປີດໃຊ້ປຸ່ມປ້ອງກັນຄວາມຮ້ອນເກີນ ຫຼືປຸ່ມປິດເປີດ. | Check for obstructions around the heater. Ensure it is on a stable surface. Allow to cool down. |
| ສຽງຜິດປົກກະຕິ. | Dust buildup or internal component issue. | Clean air inlets/outlets. If noise persists, discontinue use and contact customer support. |
If the problem is not listed or persists after attempting the solutions, please contact Pokitter customer support.
7. ຂໍ້ມູນຈໍາເພາະ
| ຄຸນສົມບັດ | ລາຍລະອຽດ |
|---|---|
| ໝາຍເລກຕົວແບບ | PKT-PTC1200 |
| ຍີ່ຫໍ້ | Pokitter |
| ຜົນຜະລິດພະລັງງານ | 7W (Fan), 700W (Low Heat), 1200W (High Heat) |
| ມຸມ Oscillation | 80° |
| ໂມງຈັບເວລາ | ສູງສຸດ 12 ຊົ່ວໂມງ |
| ຄຸນນະສົມບັດຄວາມປອດໄພ | Overheat Protection, Tip-over Auto-Off (30°), Flame-retardant ABS material |
| ຂະໜາດ (L x W x H) | ຂະໜາດປະມານ 21 x 21 x 45 cm (8.3 x 8.3 x 17.7 ນິ້ວ) |
| ນ້ຳໜັກ | ປະມານ 2.25 kg (4.96 lbs) |
| ສີ | ສີຂາວ |
8. ການຮັບປະກັນແລະການສະຫນັບສະຫນູນ
Pokitter products are designed for reliability and performance. For warranty information and customer support, please refer to the warranty card included in your product packaging or visit the official Pokitter website. Please have your model number (PKT-PTC1200) and purchase date ready when contacting support.
ສໍາລັບການຊ່ວຍເຫຼືອເພີ່ມເຕີມ, ທ່ານອາດຈະອ້າງອີງເຖິງ Pokitter Brand Store on Amazon.
