ຂໍ້ມູນຄວາມປອດໄພທີ່ສໍາຄັນ
Read all instructions before installing or using this heater. Failure to follow these instructions may result in electric shock, fire, or serious injury. Keep this manual for future reference.
- ຕັດການເຊື່ອມຕໍ່ໄຟຟ້າທຸກຄັ້ງກ່ອນທີ່ຈະໃຫ້ບໍລິການ ຫຼືທໍາຄວາມສະອາດ.
- Do not install in areas where gasoline, paint, or other flammable liquids are used or stored.
- Maintain clearances from combustible materials as specified in the installation section.
- ເຄື່ອງເຮັດຄວາມຮ້ອນນີ້ຮ້ອນເມື່ອໃຊ້. ເພື່ອຫຼີກເວັ້ນການບາດແຜ, ບໍ່ໃຫ້ຜິວຫນັງເປົ່າແຕະພື້ນຜິວຮ້ອນ.
- ຕ້ອງມີການຕິດຕາມຢ່າງໃກ້ຊິດເມື່ອໃຊ້ເຄື່ອງເຮັດຄວາມຮ້ອນໂດຍເດັກນ້ອຍ ຫຼື ຄົນພິການ ຫຼື ຢູ່ໃກ້ໆ.
ສິນຄ້າເກີນview
The Dimplex LC2507W31 is a 25-inch linear convector electric baseboard heater designed to provide efficient and quick heating for various indoor spaces. Its compact and sleek design allows for discreet installation while delivering consistent warmth.

ຮູບ 1: ດ້ານຫນ້າ view of the Dimplex LC2507W31 Linear Convector Electric Baseboard Heater.

ຮູບທີ 2: ລາຍລະອຽດດ້ານໜ້າ view of the Dimplex LC2507W31 heater, highlighting its sleek design.

Figure 3: Dimensions of the Dimplex LC2507W31 heater, showing its length, height, and depth for installation planning.
ການຕິດຕັ້ງແລະການຕິດຕັ້ງ
This section provides instructions for the proper installation of your Dimplex baseboard heater. Installation should be performed by a qualified electrician in accordance with all local and national electrical codes.
1. ສະຖານທີ່ຕິດຕັ້ງ
- Mount the heater on a wall, ensuring it is level.
- Maintain a minimum clearance of 6 inches (15 cm) from the floor and 12 inches (30 cm) from any combustible materials above the heater.
- Avoid installing directly below electrical outlets.
2. ການເຊື່ອມຕໍ່ໄຟຟ້າ
- Ensure the main power supply to the circuit is turned OFF at the circuit breaker or fuse box before beginning any wiring.
- Connect the heater to a dedicated 240V circuit. Refer to the wiring diagram provided with the heater for specific connections.
- All wiring must comply with the National Electrical Code (NEC) and local codes.
3. Securing the Heater
- Secure the heater to the wall studs using appropriate mounting hardware.
- Ensure the heater is firmly attached and stable.
ຄໍາແນະນໍາການດໍາເນີນງານ
The Dimplex LC2507W31 baseboard heater operates by convection, drawing in cool air from the bottom and releasing warm air from the top. This model typically requires an external thermostat for temperature control (not included).
1. ການເປີດພະລັງງານເບື້ອງຕົ້ນ
- After installation, turn on the main power supply to the heater circuit.
- The heater may emit a slight odor during its first few hours of operation. This is normal and will dissipate quickly.
2. ການຄວບຄຸມອຸນຫະພູມ
- If an external thermostat is installed, set the desired room temperature using the thermostat controls.
- ເຄື່ອງເຮັດຄວາມຮ້ອນຈະເປີດແລະປິດເພື່ອຮັກສາອຸນຫະພູມທີ່ກໍານົດໄວ້.
3. ຄໍາແນະນໍາການປະຕິບັດທົ່ວໄປ
- Do not block the air intake or outlet grilles. This can reduce heating efficiency and pose a fire hazard.
- Keep drapes, furniture, and other objects away from the heater to ensure proper airflow and safety.

Figure 4: The Dimplex LC2507W31 heater discreetly installed in a bedroom, demonstrating its compact footprint.

Figure 5: The Dimplex LC2507W31 heater installed in a bathroom, showcasing its suitability for various room types.

Figure 6: The Dimplex LC2507W31 heater installed in a kitchen, illustrating its versatile placement options.
ບໍາລຸງຮັກສາ
Your Dimplex baseboard heater requires minimal maintenance. Regular cleaning will help maintain its efficiency and appearance.
1. ທໍາຄວາມສະອາດ
- Before cleaning, ensure the power to the heater is turned OFF at the circuit breaker.
- ປ່ອຍໃຫ້ເຄື່ອງເຮັດຄວາມຮ້ອນເຢັນລົງໝົດ.
- ເຊັດພື້ນຜິວພາຍນອກດ້ວຍຜ້າອ່ອນໆ, ງamp ຜ້າ. ຢ່າໃຊ້ເຄື່ອງເຮັດຄວາມສະອາດຂັດຫຼືສານລະລາຍ.
- Use a vacuum cleaner with a brush attachment to remove dust from the grilles and interior components.
- Do not spray liquids directly onto the heater.
2. ການເກັບຮັກສາ
If storing the heater for an extended period, ensure it is clean and dry. Store in a cool, dry place, preferably in its original packaging to protect it from dust and damage.
ການແກ້ໄຂບັນຫາ
If you experience issues with your Dimplex baseboard heater, refer to the following common problems and solutions. If the problem persists, contact qualified service personnel.
| ບັນຫາ | ສາເຫດທີ່ເປັນໄປໄດ້ | ການແກ້ໄຂ |
|---|---|---|
| ເຄື່ອງເຮັດຄວາມຮ້ອນບໍ່ເປີດ. | ບໍ່ມີພະລັງງານກັບຫນ່ວຍບໍລິການ. ເຄື່ອງຄວບຄຸມອຸນຫະພູມຕໍ່າເກີນໄປ. ເຄື່ອງຕັດວົງຈອນປິດ. | ກວດສອບການສະຫນອງພະລັງງານ. ເພີ່ມການຕັ້ງຄ່າເຄື່ອງຄວບຄຸມອຸນຫະພູມ. ຣີເຊັດຕົວຕັດວົງຈອນ. |
| ເຄື່ອງເຮັດຄວາມຮ້ອນຜະລິດຄວາມຮ້ອນບໍ່ພຽງພໍ. | Blocked air grilles. ຂະໜາດຫ້ອງໃຫຍ່ເກີນໄປສຳລັບຄວາມຈຸຂອງເຄື່ອງເຮັດຄວາມຮ້ອນ. External thermostat malfunction. | ກຳຈັດສິ່ງກີດຂວາງອອກຈາກຕາຂ່າຍໄຟຟ້າ. Consider additional heating or a higher wattage ຫນ່ວຍ. Consult an electrician to check thermostat. |
| ກິ່ນທີ່ຜິດປົກກະຕິໃນລະຫວ່າງການປະຕິບັດງານ. | ການສະສົມຂອງຝຸ່ນ. New heater "burn-off" smell. | Clean the heater thoroughly. This is normal for new heaters and will dissipate. Ensure good ventilation. |
ຂໍ້ມູນຈໍາເພາະ
| ຄຸນສົມບັດ | ລາຍລະອຽດ |
|---|---|
| ຍີ່ຫໍ້ | DIMPLEX |
| ໝາຍເລກຕົວແບບ | LC2507W31 |
| ສີ | ສີຂາວ |
| ຂະໜາດສິນຄ້າ | 2.38"D x 25"W x 6.63"H |
| ສະບັບtage | 240 ໂວນ (AC) |
| Ampອາຍຸ | 3.13 Amps |
| ປະເພດນໍ້າມັນເຊື້ອໄຟ | ໄຟຟ້າ |
| ການຄຸ້ມຄອງຄວາມຮ້ອນ | 6.68 ຕາແມັດ |
| ປະເພດການຕິດຕັ້ງ | ຕິດຝາ |
| ນ້ໍາຫນັກລາຍການ | 4.55 ປອນ |
| UPC | 781052063976 |
ການຮັບປະກັນແລະການສະຫນັບສະຫນູນ
ການຮັບປະກັນຈໍາກັດ
Dimplex warrants this product to be free from defects in material and workmanship for a period of one (1) year from the date of original purchase. This warranty does not cover damage resulting from misuse, abuse, accident, alteration, or improper installation.
ການຊ່ວຍເຫຼືອລູກຄ້າ
For technical assistance, troubleshooting, or warranty claims, please contact Dimplex customer support:
- Webເວັບໄຊ: www.dimplex.com
- ໂທລະສັບ: Refer to the Dimplex webສະຖານທີ່ສໍາລັບເບີໂທລະສັບຕິດຕໍ່ພາກພື້ນ.
- ອີເມວ: Refer to the Dimplex webສະຖານທີ່ສະຫນັບສະຫນູນທີ່ຢູ່ອີເມວ.
Please have your model number (LC2507W31) and date of purchase ready when contacting support.





