ແນະນຳ
This manual provides detailed instructions for the safe and efficient use of your OHLUX MF18228 LED Floor Lamp. This modern torchiere lamp features 36W/3000LM brightness, 5 adjustable color temperatures, and convenient remote and touch controls. Please read this manual thoroughly before installation and operation, and retain it for future reference.
ຄໍາແນະນໍາຄວາມປອດໄພ
- ຮັບປະກັນການສະຫນອງພະລັງງານ voltage ກົງກັບ lamp's requirements (110V).
- ຜະລິດຕະພັນນີ້ຖືກອອກແບບມາສໍາລັບການນໍາໃຊ້ພາຍໃນເຮືອນເທົ່ານັ້ນ. ຢ່າປ່ອຍໃຫ້ນ້ໍາຫຼືຄວາມຊຸ່ມຊື່ນສູງ.
- ຢ່າພະຍາຍາມຖອດປະກອບຫຼືດັດແປງ lamp. ບໍ່ມີສ່ວນທີ່ຜູ້ໃຊ້ບໍລິການພາຍໃນ.
- ຮັກສາ lamp ຫ່າງຈາກແຫຼ່ງຄວາມຮ້ອນ ແລະແສງແດດໂດຍກົງ.
- ຖອດປລັກ lamp ຈາກປລັກສຽບໄຟກ່ອນທີ່ຈະທໍາຄວາມສະອາດຫຼືດໍາເນີນການບໍາລຸງຮັກສາໃດໆ.
- ຮັບປະກັນ lamp is placed on a stable, level surface to prevent tipping. The weighted base is designed for stability.
- Keep the remote control and its batteries out of reach of children.
ເນື້ອໃນຊຸດ
ກວດສອບວ່າອົງປະກອບທັງໝົດມີຢູ່ກ່ອນການປະກອບ:
- ໄຟ LED Lamp ຫົວ
- Lamp ພາກສ່ວນເສົາ (ໂດຍປົກກະຕິ 3-4 ພາກສ່ວນ)
- ຖານນ້ຳໜັກ
- ອະແດບເຕີ/ສາຍໄຟ
- ຣີໂໝດຄວບຄຸມ (ບໍ່ລວມແບັດເຕີຣີ AAA)
- ຄູ່ມືຜູ້ໃຊ້
ການຕິດຕັ້ງແລະການປະກອບ
Follow these steps to assemble your OHLUX Floor Lamp:
- ຄັດຕິດພື້ນຖານ: Carefully screw the lowest pole section into the weighted base until secure.
- ປະກອບ Pole ໄດ້: Connect the remaining pole sections by screwing them clockwise. Ensure each section is tightly fastened to prevent wobbling.
- ຄັດຕິດ L ໄດ້amp ຫົວ: screw lamp head onto the top pole section. Ensure the power cord passes freely through the pole.
- ເຊື່ອມຕໍ່ພະລັງງານ: ສຽບສາຍໄຟເຂົ້າໄປໃນຊ່ອງສຽບໄຟຟ້າມາດຕະຖານ 110V AC.
- ຕິດຕັ້ງຫມໍ້ໄຟໄລຍະໄກ: Open the battery compartment on the back of the remote control and insert two AAA batteries (not included), observing polarity.
ຄໍາແນະນໍາການດໍາເນີນງານ
Your OHLUX Floor Lamp can be controlled via the included remote control or the touch buttons located on the lamp ເສົາ.
ຟັງຊັນການຄວບຄຸມໄລຍະໄກ
- ປຸ່ມເປີດປິດ: ຫັນ lamp ເປີດ ຫຼື ປິດ.
- Color Temperature Buttons (CCT+ / CCT-): Adjusts the color temperature steplessly from 2700K (warm white) to 6500K (cool white).
- Brightness Buttons (+ / -): Adjusts the brightness steplessly from 10% to 100%.
- ປຸ່ມແສງກາງຄືນ: Activates a preset low brightness, warm color temperature mode suitable for sleeping environments.
- ໄຟລ໌ແນບແມ່ເຫຼັກ: The remote can be conveniently attached to the lamp pole or any metal surface.
ແຕະຟັງຊັນການຄວບຄຸມ
- On/Off/Short Press: A short press cycles through 4 preset color temperatures (e.g., 2700K, 4000K, 5000K, 6500K).
- Long Touch (Color Temperature): Press and hold to steplessly adjust the color temperature from 2700K to 6500K.
- Short Touch (Brightness): A short press cycles through 4 preset brightness levels (e.g., 25%, 50%, 75%, 100%).
- Long Touch (Brightness): Press and hold to steplessly adjust the brightness from 10% to 100%.
ຟັງຊັນຄວາມຈໍາ
ທamp features a memory function that remembers your last brightness and color temperature settings. These settings are retained even after the lamp is turned off via the wall switch or in case of a power outage, saving you from frequent adjustments.
ຮູບແບບແສງສະຫວ່າງໃນຕອນກາງຄືນ
Activate the dedicated night light mode via the remote control for a soft, low-intensity light, ideal for nighttime use without disturbing sleep.
ບໍາລຸງຮັກສາ
- ທໍາຄວາມສະອາດ: ຮັບປະກັນ lamp is unplugged before cleaning. Use a soft, dry cloth to wipe the lampໜ້າດິນຂອງ. ຢ່າໃຊ້ນໍ້າຢາທໍາຄວາມສະອາດທີ່ມີສີຂັດ, ຕົວລະລາຍ, ຫຼື ສານເຄມີຮຸນແຮງ, ເພາະວ່າສິ່ງເຫຼົ່ານີ້ອາດຈະທໍາລາຍພື້ນຜິວໄດ້.
- ແຫຼ່ງແສງໄຟ LED: ແຫຼ່ງກຳເນີດໄຟ LED ແມ່ນປະສົມປະສານເຂົ້າກັນ ແລະ ບໍ່ສາມາດປ່ຽນແທນໄດ້ໂດຍຜູ້ໃຊ້. ຢ່າພະຍາຍາມປ່ຽນໄຟ LED.
- ການຄວບຄຸມໄລຍະໄກ: Replace AAA batteries in the remote control when its range decreases or it becomes unresponsive.
ການແກ້ໄຂບັນຫາ
| ບັນຫາ | ສາເຫດທີ່ເປັນໄປໄດ້ | ການແກ້ໄຂ |
|---|---|---|
| Lamp ບໍ່ເປີດ | ບໍ່ມີພະລັງງານ, ການເຊື່ອມຕໍ່ວ່າງ, ຫມໍ້ໄຟຫ່າງໄກສອກຫຼີກຕາຍ. | Check if the power cord is securely plugged in. Ensure the wall outlet is functional. Replace remote control batteries. |
| ການຄວບຄຸມໄລຍະໄກບໍ່ຕອບສະໜອງ. | Dead batteries, remote too far, interference. | Replace remote batteries. Ensure you are within the 50ft (15m) range. Remove any obstructions between the remote and the lamp. |
| Lamp flickers ຫຼື dims ໂດຍບໍ່ຄາດຄິດ. | Unstable power supply, internal issue. | ລອງສຽບ lamp into a different outlet. If the problem persists, contact customer support. |
| ບໍ່ສາມາດປັບຄວາມສະຫວ່າງ ຫຼືອຸນຫະພູມສີໄດ້. | Remote issue, touch control issue. | Ensure remote batteries are fresh. Try using the touch controls on the lamp pole. If both fail, contact customer support. |
ຂໍ້ມູນຈໍາເພາະ
| ຄຸນສົມບັດ | ຂໍ້ມູນຈໍາເພາະ |
|---|---|
| ໝາຍເລກຕົວແບບ | MF18228 |
| ຍີ່ຫໍ້ | OHLUX |
| ແຫຼ່ງພະລັງງານ | ໄຟຟ້າສາຍ |
| ສະບັບtage | 110 ໂວນ |
| ວັດtage | 36 ວັດ |
| ຄວາມສະຫວ່າງ | 3000 Lumens |
| ອຸນຫະພູມສີ | 2700K - 6500K (Stepless Adjustable) |
| ດັດຊະນີການສະແດງສີ (CRI) | 85.00 |
| ວິທີການຄວບຄຸມ | ໄລຍະໄກ, ແຕະ |
| ຂະໜາດສິນຄ້າ | 9.8"D x 9.8"W x 69"H (24.9cm D x 24.9cm W x 175.3cm H) |
| ນ້ໍາຫນັກລາຍການ | 7.7 ປອນ (3.5 ກິໂລກຣາມ) |
| ວັດສະດຸ | Powdered Metal Steel |
| ປະເພດສໍາເລັດຮູບ | Powder Coated |
| Lamp ປະເພດ | LED |
| ການນຳໃຊ້ພາຍໃນ/ນອກ | ພາຍໃນ |
| ຄຸນນະສົມບັດພິເສດ | Extended Cord, Improved Cooling System, Smooth Bright Dimmable, Smooth Color Temperature Dimmable, Super Bright |
ຂໍ້ມູນການຮັບປະກັນ
Specific warranty details for the OHLUX MF18228 Floor Lamp are not provided in the product description. For information regarding warranty coverage and terms, please contact OHLUX customer support directly.
ການຊ່ວຍເຫຼືອລູກຄ້າ
For technical assistance, service inquiries, or any questions regarding your OHLUX Floor Lamp, please contact OHLUX customer support. The manufacturer aims to reply within 24 hours to ensure customer satisfaction.
Please refer to the official OHLUX website or your purchase documentation for the most current contact methods.
