XPG Levante X 360 All-in-One ARGB CPU Liquid Cooler

1. ບົດແນະນຳ

The XPG Levante X 360 is an All-in-One (AIO) ARGB CPU Liquid Cooler designed to provide efficient and reliable thermal management for high-performance CPUs. This cooler features a 360mm radiator equipped with three 120mm Fluid Dynamic Bearing (FDB) ARGB fans and an Asetek-powered pump, ensuring optimal heat dissipation and quiet operation. This manual provides essential information for the proper installation, operation, and maintenance of your XPG Levante X 360 liquid cooler.

Image 1.1: XPG Levante X 360 All-in-One ARGB CPU Liquid Cooler. This image displays the complete liquid cooler unit, including the 360mm radiator, three 120mm ARGB fans, and the pump/cold plate assembly with braided tubing.

2. ເນື້ອໃນຊຸດ

Verify that all components are present and in good condition before proceeding with installation.

• XPG Levante X 360 CPU Liquid Cooler (Radiator, Pump, Tubing, 3x 120mm ARGB Fans)
• Mounting Bracket Kit for Intel (LGA 1700, 1200, 115X, 2066, 2011-3, 2011)
• Mounting Bracket Kit for AMD (AM5, AM4, TR4)
• ສະກູພັດລົມ ແລະ ສະກູໝໍ້ນ້ຳ
• ARGB Controller/Cables
• ການວາງຄວາມຮ້ອນ (ໃຊ້ກ່ອນ ຫຼືໃສ່ໃນທໍ່)
• ຄູ່ມືຜູ້ໃຊ້ (ເອກະສານນີ້)

Image 2.1: Package contents. This image shows the radiator with fans, pump, various mounting brackets, screws, and cables included in the box.

3. ຂໍ້ມູນຄວາມປອດໄພ

Please read and understand the following safety precautions before installing or operating the XPG Levante X 360 liquid cooler.

• ການຕັດການເຊື່ອມຕໍ່ໄຟຟ້າ: ໃຫ້ຖອດສາຍໄຟອອກຈາກຄອມພິວເຕີຂອງທ່ານກ່ອນຕິດຕັ້ງ ຫຼື ບຳລຸງຮັກສາໃດໆສະເໝີ.
• ການປົດປ່ອຍໄຟຟ້າສະຖິດ (ESD): Take precautions against ESD by grounding yourself before handling components.
• ການຈັດການຂອງແຫຼວ: While the cooler is a sealed unit, handle it with care to prevent damage to the tubing or radiator, which could lead to leaks.
• ຂອບແຫຼມ: Be aware of sharp edges on computer cases and cooler components during installation.
• ການລະບາຍອາກາດ: Ensure adequate airflow within your computer case for optimal cooling performance.
• ຄວາມເຂົ້າກັນໄດ້: Verify compatibility with your CPU socket and computer case before installation.

4. ການຕິດຕັ້ງແລະການຕິດຕັ້ງ

The XPG Levante X 360 is designed for hassle-free installation. Follow these steps carefully for proper setup.

4.1 ກະກຽມລະບົບຂອງເຈົ້າ

1. ປິດຄອມພິວເຕີຂອງທ່ານ ແລະຕັດການເຊື່ອມຕໍ່ສາຍທັງໝົດ.
2. ເປີດເຄສຄອມພິວເຕີຂອງທ່ານເພື່ອເຂົ້າເຖິງພື້ນທີ່ເມນບອດ ແລະ CPU.
3. ເອົາເຄື່ອງເຮັດຄວາມເຢັນ CPU ທີ່ມີຢູ່ແລ້ວອອກ. ເຮັດຄວາມສະອາດໜ້າຜິວ CPU ຢ່າງລະອຽດເພື່ອເອົາແຜ່ນຄວາມຮ້ອນເກົ່າອອກ.

4.2 ຕິດຕັ້ງຮາດແວ Mounting

Select the appropriate mounting bracket for your CPU socket (Intel or AMD). The cooler supports LGA 1700, 1200, 115X, 2066, 2011-3, 2011 for Intel, and AM5, AM4, TR4 for AMD.

1. Attach the correct backplate to the rear of your motherboard (for Intel sockets). AMD AM4/AM5 typically uses the stock backplate.
2. Secure the standoffs to the motherboard through the CPU cooler mounting holes.
3. Attach the chosen CPU bracket to the pump head.

Image 4.1: Key features highlighting support for LGA 1700 and AM5 sockets, along with low noise fan, aluminum radiator, high quality low noise pump, and hassle-free installation.

4.3 Mount the Radiator and Fans

Determine the optimal mounting location for the 360mm radiator within your case (e.g., front, top).

1. If not pre-attached, mount the three 120mm ARGB fans to the radiator using the provided fan screws. Ensure correct airflow direction (intake or exhaust) based on your case's ventilation strategy.
2. Secure the radiator assembly to your chosen mounting location in the PC case using the longer radiator screws.

4.4 Install the Pump Head

Carefully place the pump head onto the CPU, aligning the mounting holes with the standoffs.

1. If thermal paste is not pre-applied, apply a small pea-sized amount to the center of the CPU's integrated heat spreader (IHS).
2. Place the pump head onto the CPU, ensuring even contact.
3. Tighten the thumbscrews or nuts in a diagonal pattern until snug. Do not overtighten.

4.5 ເຊື່ອມຕໍ່ສາຍໄຟ

Connect the pump and fan cables to your motherboard or ARGB controller.

• Connect the pump's 3-pin or 4-pin power cable to the motherboard's CPU_FAN or AIO_PUMP header.
• Connect the 4-pin PWM fan cables from the three 120mm fans to available fan headers on your motherboard or to a fan hub/controller.
• Connect the ARGB cables from the fans and pump head to an ARGB header on your motherboard (5V 3-pin) or to the included ARGB controller.

Image 4.2: The XPG Levante X 360 cooler installed inside a computer case, showcasing the illuminated pump head and ARGB fans.

5. ຄໍາແນະນໍາການດໍາເນີນງານ

Once installed, the XPG Levante X 360 operates automatically to cool your CPU.

• ການເປີດເຄື່ອງເບື້ອງຕົ້ນ: After installation, power on your computer. The pump and fans should start operating. Check for any unusual noises or leaks.
• ການຄວບຄຸມພັດລົມ ແລະປ້ຳ: The 4-pin PWM fans and pump allow for speed control via your motherboard's BIOS/UEFI settings or dedicated software. Adjust fan curves to balance cooling performance and noise levels.
• ແສງ ARGB: The Addressable RGB (ARGB) lighting on the fans and pump head can be controlled via your motherboard's ARGB software (e.g., ASUS Aura Sync, MSI Mystic Light Sync, GIGABYTE RGB Fusion, ASRock Polychrome Sync) or through the included ARGB controller.

ຮູບພາບທີ 5.1: ເປັນການປິດ view of the XPG Levante X 360's ARGB fans and pump, illustrating the vibrant lighting effects.

6. ບໍາລຸງຮັກສາ

ການບຳລຸງຮັກສາເປັນປະຈຳຊ່ວຍຮັບປະກັນປະສິດທິພາບທີ່ດີທີ່ສຸດ ແລະ ອາຍຸການໃຊ້ງານທີ່ຍາວນານຂອງເຄື່ອງເຮັດຄວາມເຢັນຂອງແຫຼວຂອງທ່ານ.

• ການກຳຈັດຂີ້ຝຸ່ນ: ເຮັດຄວາມສະອາດຂີ້ຝຸ່ນອອກຈາກຮູ radiator ແລະໃບພັດລົມເປັນໄລຍະໆ ໂດຍໃຊ້ອາກາດອັດແໜ້ນ ຫຼືແປງອ່ອນໆ. ຂີ້ຝຸ່ນຫຼາຍເກີນໄປສາມາດຂັດຂວາງການໄຫຼຂອງອາກາດແລະຫຼຸດຜ່ອນປະສິດທິພາບຂອງຄວາມເຢັນ.
• ກວດກາທໍ່: Occasionally check the tubing for any signs of kinks, cracks, or leaks.
• ປະຕິບັດການພັດລົມ: Ensure all fans are spinning freely and quietly. Replace any fans that become excessively noisy or stop functioning.
• ການ​ດໍາ​ເນີນ​ງານ Pump​: Listen for any unusual noises from the pump. A properly functioning pump should operate quietly.

7. ການແກ້ໄຂບັນຫາ

If you encounter issues with your XPG Levante X 360, refer to the following common problems and solutions.

8. ຂໍ້ມູນຈໍາເພາະ

Detailed technical specifications for the XPG Levante X 360 All-in-One ARGB CPU Liquid Cooler.

• ຕົວແບບ: LEVANTEX360-BKCWW
• ປະເພດເຄື່ອງເຮັດຄວາມເຢັນ: All-in-One Liquid CPU Cooler
• ຂະໜາດໝໍ້ນ້ຳ: 360ມມ
• ຂະ ໜາດ ຂອງພັດລົມ: 120 ມມ (x3)
• ປະເພດພັດລົມ: ARGB Fluid Dynamic Bearing (FDB) Fans
• ຕົວເຊື່ອມຕໍ່ພັດລົມ: 4-Pin PWM
• ຄວາມໄວການຫມຸນສູງສຸດ: 2000 RPM
• ຄວາມອາດສາມາດໄຫຼທາງອາກາດ: 61.5 ລູກບາດຟຸດຕໍ່ນາທີ (CFM)
• ລະດັບສຽງລົບກວນ: 18.17 Decibels (dBA)
• ປະເພດປັ໊ມ: Asetek-powered High-Performance Pump
• Pump Voltage: 12 ໂວນ
• ວິທີການເຮັດຄວາມເຢັນ: ທາດແຫຼວ
• ວັດສະດຸ: Aluminum (Radiator), Copper (Cold Plate)
• Compatible CPU Sockets:
  • Intel: LGA 1700, 1200, 115X, 2066, 2011-3, 2011
  • AMD: AM5, AM4, TR4
• ຂະໜາດສິນຄ້າ (ຊຸດ): 18.9 x 5.91 x 7.48 ນິ້ວ
• ນ້ໍາຫນັກລາຍການ: 4.71 ປອນ
• UPC: 842243029062
• ຜູ້ຜະລິດ: Adata

Image 8.1: Graph illustrating the relationship between PWM duty cycle, fan speed (RPM), fan air flow (CFM), and fan noise (dBA) for the XPG Hurricane 120 ARGB PWM fans.

9. ການຮັບປະກັນແລະການສະຫນັບສະຫນູນ

XPG products are manufactured to the highest quality standards. For warranty information, technical support, or service inquiries, please refer to the official XPG webຫຼື ຕິດຕໍ່ຝ່າຍສະໜັບສະໜູນລູກຄ້າຂອງເຂົາເຈົ້າ. ເກັບຮັກສາຫຼັກຖານການຊື້ຂອງທ່ານໄວ້ເພື່ອການຮຽກຮ້ອງການຮັບປະກັນ.

Official XPG Webເວັບໄຊ: www.xpg.com