1. ບົດແນະນຳ
The GEEKVAPE Wenax M Starter Kit is a comprehensive vaping solution designed for convenience and portability. It harmoniously integrates the Wenax M Powerbank with a 2500mAh battery capacity and the Wenax M1 Mini Kit with a 400mAh battery capacity. This kit is engineered for extended use, offering up to 7 days of operation on a single charge of the power bank.
The device features a satin aluminum alloy casing complemented by a premium pebbled leather finish, ensuring both aesthetic appeal and a comfortable grip. It supports multi-device charging and utilizes magnetic charging for ease of use. The Wenax M1 Mini Pod has a 2ml capacity and supports 0.8Ω/1.2Ω resistance pods, providing versatile vaping experiences.
2. ສິ່ງທີ່ຢູ່ໃນກ່ອງ
ກະລຸນາກວດສອບເນື້ອໃນຂອງຊຸດຂອງທ່ານເພື່ອໃຫ້ແນ່ໃຈວ່າລາຍການທັງຫມົດມີຢູ່:
- 1x Wenax M1 Mini Device
- 1x Wenax M Powerbank
- 2x Refillable Pods (0.8Ω and 1.2Ω)
- 1x ສາຍ USB Type-C ຫາ Type-C
- 10x Geekvape Filter Drip Tips
- 1x ຄູ່ມືຜູ້ໃຊ້
3. ຕັ້ງຄ່າ
3.1. Charging the Powerbank and Device
Before first use, fully charge both the Wenax M Powerbank and the Wenax M1 Mini Device.
- Powerbank Charging: Connect the Wenax M Powerbank to a power source using the provided USB Type-C to Type-C cable. The power bank has a 2500mAh capacity and supports Type-C 5V 2A charging.
- ການສາກອຸປະກອນ: The Wenax M1 Mini Device (400mAh) can be charged by magnetically attaching it to the Wenax M Powerbank. A gentle vibration will indicate that magnetic charging has begun.
3.2. Assembling the Wenax M1 Mini Device
- ໃສ່ Pod: Select either the 0.8Ω or 1.2Ω refillable pod. Insert the pod firmly into the top of the Wenax M1 Mini Device until it clicks into place.
- Attach Drip Tip: Place one of the Geekvape Filter Drip Tips onto the mouthpiece of the pod.
3.3. ການຕື່ມຝັກ
- ເອົາ pod ອອກຈາກອຸປະກອນ.
- Locate the silicone stopper on the side of the pod. Open the stopper.
- Carefully fill the pod with your desired e-liquid through the filling port. Do not overfill.
- Securely close the silicone stopper.
- Reinsert the filled pod into the device.
- ສຳຄັນ: After filling a new pod, wait at least 5-10 minutes before vaping to allow the coil to become fully saturated with e-liquid. This prevents dry hits and extends coil life.
4. ຄໍາແນະນໍາການດໍາເນີນງານ
4.1. ເປີດ/ປິດ
The Wenax M1 Mini Device is draw-activated, meaning there are no buttons to press for power on/off. Simply inhale from the mouthpiece to activate the device.
4.2. ການສູບຢາອີເລັກໂທຣນິກ
Once the pod is filled and properly installed, and the device is charged, simply draw on the mouthpiece as you would with a traditional cigarette. The device will automatically produce vapor.
4.3. Smart Prompt (LED & Vibration)
The Wenax M Powerbank features smart prompts via LED indicators and vibration to communicate its status, such as charging progress or low battery. Refer to the LED indicator guide in the full manual for detailed information.
5. ບໍາລຸງຮັກສາ
5.1. ທໍາຄວາມສະອາດ
- Regularly clean the contact points between the pod and the device with a dry cotton swab to ensure optimal connection.
- Wipe down the exterior of both the Wenax M Powerbank and the Wenax M1 Mini Device with a soft, dry cloth.
- If any e-liquid leaks, clean it immediately to prevent damage to the device.
5.2. ການປ່ຽນຝັກ
Pods are consumable parts and should be replaced when you notice a burnt taste, reduced vapor production, or a change in flavor. To replace a pod:
- Pull the old pod out of the device.
- ກຳຈັດຝັກເກົ່າຢ່າງມີຄວາມຮັບຜິດຊອບ.
- Insert a new, filled pod into the device.
6. ການແກ້ໄຂບັນຫາ
This section addresses common issues you might encounter with your Wenax M Starter Kit.
| ບັນຫາ | ສາເຫດທີ່ເປັນໄປໄດ້ | ການແກ້ໄຂ |
|---|---|---|
| Device not producing vapor | Low battery; Empty pod; Clogged mouthpiece; Poor pod connection. | Charge device/powerbank; Refill pod; Clean mouthpiece; Re-insert pod firmly. |
| ລົດຊາດໄໝ້ | Coil is dry/burnt; Pod is empty; Vaping too frequently. | Refill pod and wait 5-10 mins; Replace pod; Take shorter breaks between puffs. |
| ຮົ່ວໄຫຼອອກຈາກຝັກ | Overfilled pod; Damaged pod; Condensation. | Do not overfill; Replace pod; Regularly clean condensation from device. |
| ອຸປະກອນບໍ່ໄດ້ສາກໄຟ | Cable issue; Dirty charging port; Powerbank issue. | Try a different USB-C cable; Clean charging port; Ensure powerbank is charged. |
7. ຂໍ້ມູນຈໍາເພາະ
7.1. Wenax M Powerbank
- ຄວາມອາດສາມາດຫມໍ້ໄຟ: 2500mAh
- ການເຕືອນອັດສະລິຍະ: LED & Vibration
- ຂໍ້ມູນຈໍາເພາະຂອງການສາກໄຟ: Type-C 5V 2A
- ຂໍ້ມູນຈໍາເພາະຜົນຜະລິດ: Type-C 5V 1A
- ຂະໜາດ: ຂະ ໜາດ 93.5mm (H) x 34mm (W) x 22mm (D)
- ນ້ຳໜັກ: ປະມານ 230g
7.2. Wenax M1 Mini Device
- ຄວາມອາດສາມາດ Pod: 2ml
- ຄວາມອາດສາມາດຫມໍ້ໄຟ: 400mAh
- Pod Resistance ຮອງຮັບ: 0.8Ω / 1.2Ω
- ຜົນໄດ້ຮັບ Voltage: 3.2-4.2V
- ພະລັງງານອອກ: 16W ສູງສຸດ
- ຂະໜາດ: Φ16mm (Diameter) x 78mm (Length, Pod Excluded)
8. ຂໍ້ມູນຄວາມປອດໄພ
ກະລຸນາອ່ານແລະເຂົ້າໃຈຄໍາເຕືອນຄວາມປອດໄພທັງຫມົດກ່ອນທີ່ຈະນໍາໃຊ້ຜະລິດຕະພັນນີ້ເພື່ອປ້ອງກັນການບາດເຈັບຫຼືຄວາມເສຍຫາຍ.
- ຜະລິດຕະພັນນີ້ແມ່ນມີຈຸດປະສົງເພື່ອ external use only.
- ຮັກສາໃຫ້ໄກຈາກເດັກນ້ອຍ ແລະສັດລ້ຽງ.
- ຢ່າໃຫ້ອຸປະກອນຖືກອຸນຫະພູມສູງ ຫຼື ແສງແດດໂດຍກົງ ຫຼື ນ້ຳ.
- Use only the charging cable provided with the kit.
- ຫ້າມຖອດປະກອບ ຫຼືແກ້ໄຂອຸປະກອນ.
- ຖ້າອຸປະກອນສະແດງອາການເສຍຫາຍ, ຮ້ອນເກີນໄປ ຫຼື ມີພຶດຕິກຳຜິດປົກກະຕິ, ໃຫ້ຢຸດໃຊ້ທັນທີ.
- ກຳຈັດຂີ້ເຫຍື້ອເອເລັກໂຕຣນິກຢ່າງມີຄວາມຮັບຜິດຊອບຕາມລະບຽບການຂອງທ້ອງຖິ່ນ.
9. ການຮັບປະກັນແລະການສະຫນັບສະຫນູນ
For warranty information, technical support, or service inquiries, please contact GEEKVAPE customer service or the authorized retailer from whom you purchased the product. Please retain your proof of purchase for warranty claims.
