ແນະນຳ
The Phanteks Eclipse G360A is a high-performance mid-tower gaming chassis designed for optimal airflow and component compatibility. It features an ultra-fine performance mesh front panel for superior cooling and dust filtration, integrated Digital-RGB lighting, and extensive support for modern gaming hardware including large GPUs and advanced liquid cooling solutions. This manual provides detailed instructions for setting up, operating, and maintaining your Eclipse G360A chassis.
ການຕິດຕັ້ງແລະການຕິດຕັ້ງ
1. Unboxing ແລະເນື້ອໃນ
Carefully remove the chassis from its packaging. Verify that all components and accessories are present. The package should include the Eclipse G360A chassis, pre-installed 120mm D-RGB fans, and an accessory box containing screws, zip ties, and the user manual.
2. ຄວາມເຂົ້າກັນໄດ້ຂອງອົງປະກອບ
- ຮອງຮັບເມນບອດ: ATX, micro-ATX, mini-ITX, E-ATX (up to 280mm wide).
- ຄວາມຍາວ GPU: Up to 400 mm (15.7 in).
- ຄວາມສູງຂອງ CPU Cooler: Up to 162 mm (6.3 in).
- ຄວາມຍາວ PSU: Up to 220 mm (280 mm depending on HDD cage location).
- ການເກັບຮັກສາ: 2x 3.5" internal (included), 3x 2.5" internal (2 included).
ຮູບທີ 1: ພາຍໃນ view highlighting 400mm GPU clearance, supporting high-end graphics cards.
Figure 2: Multiple storage options for 2.5" and 3.5" drives, with flexible mounting points.
3. ຂັ້ນຕອນການຕິດຕັ້ງ
- ການກະກຽມ Chassis: Remove the tempered glass side panel by unscrewing the thumb screws. The front panel can be detached for easier fan/radiator installation.
Figure 3: Detachable front panel and fan bracket for simplified installation.
- ຕິດຕັ້ງເມນບອດ: Secure your motherboard to the standoffs using the provided screws.
- ຕິດຕັ້ງ Drives Storage: Mount 2.5" SSDs to the dedicated locations behind the motherboard tray or on the PSU shroud. Install 3.5" HDDs into the drive cages located under the PSU shroud.
- ຕິດຕັ້ງໜ່ວຍສະໜອງພະລັງງານ (PSU): Slide the PSU into its designated compartment at the bottom rear of the chassis and secure it with screws.
- ຕິດຕັ້ງບັດກາຟິກ (GPU): Insert your graphics card into the PCIe slot on the motherboard. The chassis supports vertical GPU mounting with an optional bracket (PH-VGPUKT4.0_03).
- Install Cooling Components: The G360A supports various fan and radiator configurations.
- ສະຫນັບສະຫນູນແຟນ: Front: 3x 120mm (3 pre-installed) or 2x 140mm; Top: 3x 120mm or 2x 140mm; Rear: 1x 120mm.
- ສະຫນັບສະຫນູນລັງສີ: Front: Up to 360mm or 280mm; Top: Up to 360mm; Rear: 120mm. Note: Front and top 360mm radiators cannot be installed simultaneously.
Figure 4: Detailed fan and radiator placement options for optimal cooling.
- ການຄຸ້ມຄອງສາຍໄຟ: Utilize the 36mm (1.4 in) cable management space behind the motherboard tray to route and secure cables for a clean build and improved airflow.
ຄໍາແນະນໍາການດໍາເນີນງານ
1. Front I/O Panel Functions
The front I/O panel provides convenient access to essential controls and ports:
- ປຸ່ມເປີດປິດ: ເປີດ ຫຼື ປິດລະບົບ.
- 2x USB 3.0 Ports: ສໍາລັບການເຊື່ອມຕໍ່ອຸປະກອນ USB.
- ຊ່ອງສຽບໄມໂຄຣໂຟນ/ຫູຟັງ: ສໍາລັບການປ້ອນຂໍ້ມູນສຽງແລະຜົນຜະລິດ.
- D-RGB Mode Button: Cycles through pre-programmed lighting effects.
- D-RGB Color Button: ປ່ຽນສີຂອງໄຟ D-RGB.
Figure 5: Front I/O panel with easy-access controls for power, USB, audio, and D-RGB lighting.
2. Digital-RGB Lighting Control
The Eclipse G360A features integrated D-RGB lighting with pre-installed 120mm D-RGB fans and an LED strip along the tempered glass panel. The lighting can be controlled in two ways:
- ການຄວບຄຸມຄູ່ມື: Use the D-RGB Mode and Color buttons on the front I/O panel to cycle through various effects and colors without software.
- ການຊິ້ງຂໍ້ມູນຂອງເມນບອດ: The D-RGB controller can be connected to a compatible motherboard's D-RGB header (e.g., ASUS Aura Sync, MSI Mystic Light Sync, GIGABYTE RGB Fusion, ASRock Polychrome Sync, Razer Chroma). This allows for software control and synchronization with other D-RGB components in your system. Refer to your motherboard manual for D-RGB header location and software instructions.
Figure 6: Integrated D-RGB lighting and compatibility with major motherboard synchronization software.
ບໍາລຸງຮັກສາ
1. Cleaning the Ultra-fine Performance Mesh
The front panel's ultra-fine mesh acts as a dust filter. To maintain optimal airflow and prevent dust buildup, regularly clean the mesh:
- Gently detach the front panel.
- Use a soft brush or compressed air to remove accumulated dust from the mesh.
- Wipe the mesh with a slightly damp ເຊັດຜ້າຖ້າຈຳເປັນ, ຮັບປະກັນວ່າມັນແຫ້ງໝົດກ່ອນທີ່ຈະຕິດຄືນ.
Figure 7: The ultra-fine performance mesh design, crucial for airflow and dust filtration.
2. General Chassis Cleaning
For general cleaning of the chassis exterior and interior:
- ກວດໃຫ້ແນ່ໃຈວ່າລະບົບປິດ ແລະຖອດປລັກອອກ.
- Use a microfiber cloth to wipe down exterior surfaces.
- For interior dust, use compressed air to blow dust out of components and the chassis.
- Clean the tempered glass panel with a glass cleaner and a soft cloth.
ການແກ້ໄຂບັນຫາ
ບັນຫາທົ່ວໄປແລະການແກ້ໄຂ
| ສະບັບ | ສາເຫດທີ່ເປັນໄປໄດ້ | ການແກ້ໄຂ |
|---|---|---|
| ລະບົບບໍ່ເປີດ. | Loose power connections, faulty PSU, incorrect front panel header connection. | Check all power cables (24-pin, 8-pin CPU, GPU). Verify front panel power switch connection to motherboard. Test PSU if possible. |
| D-RGB lighting not working or incorrect. | Loose D-RGB cable connection, incorrect D-RGB header, software conflict. | Ensure D-RGB cables are securely connected. If using motherboard sync, verify connection to a 3-pin 5V D-RGB header (not 4-pin 12V RGB). Try manual control via case buttons. Reinstall or update motherboard RGB software. |
| ກະແສລົມບໍ່ດີ ຫຼື ອຸນຫະພູມສູງ. | Dust buildup, incorrect fan orientation, obstructed airflow. | Clean front mesh and other dust filters. Ensure fans are oriented correctly (intake/exhaust). Check for cable obstructions inside the case. |
| Front USB ports not functioning. | Loose USB 3.0 header cable connection to motherboard. | Verify the USB 3.0 cable from the front panel is securely connected to the motherboard's USB 3.0 header. |
ຂໍ້ມູນຈໍາເພາະ
| ຄຸນສົມບັດ | ລາຍລະອຽດ |
|---|---|
| ຊື່ຕົວແບບ | Eclipse G360A |
| ໝາຍເລກຕົວແບບ | PH-EC360ATG_DBK02 |
| ປັດໄຈແບບຟອມ | ຫໍກາງ |
| ຂະໜາດ (WxDxH) | 455 x 200 x 465 ມມ / 17.9 x 7.87 x 18.3 ນິ້ວ |
| ເອກະສານ | ໂຄງລົດເຫຼັກ, ແກ້ວອຸ່ນ |
| ຮອງຮັບເມນບອດ | ATX, micro-ATX, mini-ITX, E-ATX (up to 280mm wide) |
| ຫນ້າ I/O | 2x USB 3.0, Microphone/Headphone Combo, Power Button, D-RGB Mode, D-RGB Color |
| ສະລັອດຕິງຂະຫຍາຍ | 7 |
| ຊ່ອງຂັບພາຍໃນ 3.5" | 2 (ລວມ 2x) |
| ຊ່ອງຂັບພາຍໃນ 2.5" | 3 (ລວມ 2x) |
| ພັດລົມທີ່ຕິດຕັ້ງໄວ້ລ່ວງໜ້າ | 3x 120mm D-RGB (Front) |
| Fan Support (120mm) | Front: 3x; Top: 3x; Rear: 1x |
| Fan Support (140mm) | Front: 2x; Top: 2x |
| Radiator Support (120mm) | ດ້ານໜ້າ: ສູງສຸດ 360 ມມ; ດ້ານເທິງ: ສູງສຸດ 360 ມມ; ດ້ານຫຼັງ: 120 ມມ |
| Radiator Support (140mm) | ດ້ານໜ້າ: ສູງສຸດ 280 ມມ; ດ້ານເທິງ: ສູງສຸດ 360 ມມ |
| ຄວາມຍາວສູງສຸດຂອງ GPU | 400 ມມ / 15.7 ນິ້ວ |
| ຄວາມສູງຂອງ CPU Cooler ສູງສຸດ | 162 ມມ / 6.3 ນິ້ວ |
| ພື້ນທີ່ການຈັດການສາຍ | 36 ມມ / 1.4 ນິ້ວ |
| ຄວາມຍາວ PSU ສູງສຸດ | 220 mm / 280 mm (depends on HDD Cage location) |
ການຮັບປະກັນແລະການສະຫນັບສະຫນູນ
ຂໍ້ມູນການຮັບປະກັນ
Phanteks products are manufactured to the highest quality standards. For detailed warranty terms and conditions, please refer to the warranty card included with your product or visit the official Phanteks webເວັບໄຊ. ການຮັບປະກັນໂດຍທົ່ວໄປກວມເອົາຂໍ້ບົກພ່ອງຂອງວັດສະດຸແລະຝີມືພາຍໃຕ້ການນໍາໃຊ້ປົກກະຕິ.
ການຊ່ວຍເຫຼືອລູກຄ້າ
Should you encounter any issues or have questions regarding your Phanteks Eclipse G360A chassis, please contact Phanteks customer support. You can find contact information, FAQs, and additional resources on the official Phanteks webເວັບໄຊ:
