ຄູ່ມືຜູ້ໃຊ້ໂຕະຢືນໄຟຟ້າ FLEXISPOT E6 Essential (ET365)

1. ບົດແນະນຳ

This manual provides comprehensive instructions for the assembly, operation, maintenance, and troubleshooting of your FLEXISPOT E6 Essential (ET365) Electric Standing Desk. Please read this manual thoroughly before use to ensure safe and efficient operation.

2. ຂໍ້ມູນຄວາມປອດໄພ

• Ensure the desk is loaded within the recommended maximum weight limit of 220 lbs (100 kg) to maintain stability and prevent damage.
• Adjust the desk height according to individual user heights to utilize the 3-stage lift system's full range and ensure optimal stability.
• ໃຫ້ເດັກນ້ອຍ ແລະສັດລ້ຽງຢູ່ຫ່າງຈາກໂຕະເຮັດວຽກໃນລະຫວ່າງການເຮັດວຽກ.
• ຫຼີກເວັ້ນການວາງຂອງແຫຼວໂດຍກົງໃສ່ກະດານຄວບຄຸມຫຼືຢູ່ໃກ້ກັບອົງປະກອບໄຟຟ້າ.
• ຢ່າຖອດປະກອບ ຫຼື ດັດແປງອຸປະກອນໄຟຟ້າຂອງໂຕະ. ຕິດຕໍ່ຝ່າຍຊ່ວຍເຫຼືອລູກຄ້າເພື່ອຂໍການບໍລິການ.
• Ensure all cables are properly managed to prevent tripping hazards and damage during height adjustments.

3. ເນື້ອໃນຊຸດ

Your FLEXISPOT E6 Essential desk ships in two boxes. Please verify all components are present before beginning assembly.

ອົງປະກອບລວມ:

• Desktop (One-Piece Maple Top, 48"x30")
• ກອບໂຕະ (ສີຂາວ)
• Dual Motor Lift System
• ກະ​ດານ​ຄວບ​ຄຸມ​ທີ່​ມີ presets ຄວາມ​ຈໍາ​
• Assembly Hardware (screws, wrenches, cable clips)
• ອະແດບເຕີໄຟຟ້າ ແລະສາຍໄຟ
• ຄູ່ມືການສອນ

Image: All components of the FLEXISPOT E6 Essential desk laid out for assembly, including the desktop, frame parts, control panel, and tools.

4. ການຕິດຕັ້ງແລະການປະກອບ

Assembly typically requires one person and takes approximately 1 hour. Follow the steps below for a smooth setup.

4.1 Unboxing ແລະການກະກຽມ

1. Carefully open both boxes and remove all components.
2. Place the desktop upside down on a soft, clean surface (e.g., carpet or a blanket) to prevent scratches.
3. Verify all parts against the package contents list.

4.2 ການປະກອບກອບ

1. Attach the lifting columns to the crossbeams using the provided screws and tools. Ensure screws are aligned with square holes and tightened securely.
2. Connect the feet to the bottom of the lifting columns.
3. Adjust the frame width to match your 48"x30" desktop.

Video: Official installation guide for the FLEXISPOT E6 Essential desk, detailing frame assembly and desktop attachment.

4.3 Desktop Attachment

1. Center the assembled frame onto the underside of the desktop.
2. Secure the frame to the desktop using the provided screws. Pre-drilled holes may be present; if not, carefully drill pilot holes.
3. Attach the control panel to the underside of the desktop, ensuring it is flush with the edge.

ຮູບພາບ: ໃກ້ຊິດ view of the intelligent keypad control panel with LED display and memory presets, located on the underside of the desktop.

4.4 ການຈັດການສາຍ

1. Connect the dual motors, control panel, and power adapter according to the labels.
2. Utilize the built-in cable management tray and magnetic cover cloth to organize and conceal all wires.
3. Ensure cables have enough slack to accommodate full height adjustment without tension.

ຮູບພາບ: ຂ້າງລຸ່ມ view of the FLEXISPOT E6 desk showing organized cables within the cable management system.

5. ຄໍາແນະນໍາການດໍາເນີນງານ

5.1 ການປັບຄວາມສູງ

• ໃຊ້ ຂຶ້ນ (▲) ແລະ ລົງ (▼) arrow buttons on the control panel to manually adjust the desk height. The LED display will show the current height.
• The desk features a 3-stage lift system, allowing height adjustments from 23.6" to 48.8".

5.2 ການກຳນົດຄວາມຈຳລ່ວງໜ້າ

• The control panel has four memory buttons (1, 2, 3, 4) to save your preferred sitting and standing heights.
• To save a height: Adjust the desk to your desired height, then press the 'ມ' button followed by one of the number buttons (1-4). The display will confirm the setting.
• To recall a saved height: Simply press the corresponding number button (1-4). The desk will automatically move to the saved position.

5.3 ລະບົບຕ້ານການຊົນກັນ

• The desk is equipped with an anti-collision system that detects obstacles during height adjustment. If an obstacle is detected, the desk will stop and reverse slightly to prevent damage.
• Collision sensitivity can typically be adjusted via the control panel settings (refer to the full manual for detailed instructions).

Image: Diagram illustrating the anti-collision system of the FLEXISPOT E6 desk, showing it stopping upon encountering an obstacle.

6. ຄຸນນະສົມບັດທີ່ສໍາຄັນ

• Spacious One-Piece Desktop: A 48"x30" whole-piece maple desktop provides ample ຊ່ອງສໍາລັບຈໍແລະອຸປະກອນເສີມຫຼາຍ.
• 3-ສtage Dual Motor Lift System: Offers a wide height adjustment range from 23.6" to 48.8" with smooth and quiet operation (under 50 dB).
• ຄວາມສາມາດໃນການໂຫຼດສູງ: Supports up to 220 lbs (100 kg), accommodating various office equipment.
• Programmable Control Panel: Features an LED display and four memory presets for quick height adjustments.
• ການກໍ່ສ້າງທີ່ເຂັ້ມແຂງ: Built with a strong steel structure for enhanced stability and durability.
• FSC-Certified Desktop: Tabletop made from responsibly sourced wood.

ຮູບພາບ: ລາຍລະອຽດ view of the intelligent keypad, highlighting the LED display, memory presets, and up/down controls.

Image: Visual representation of the desk's 220 lbs maximum load capacity, showing two 110 lbs weights on the desktop.

7. ບໍາລຸງຮັກສາ

• ກວດສອບສະກູ ແລະ ນັອດທຸກອັນເປັນປະຈຳເພື່ອຮັບປະກັນວ່າພວກມັນແໜ້ນດີ.
• ທຳຄວາມສະອາດພື້ນຜິວໜ້າຈໍດ້ວຍຜ້າທີ່ອ່ອນນຸ້ມ, ຜ້າເຊັດໂຕamp ຜ້າ. ຫຼີກເວັ້ນການສານເຄມີທີ່ຮຸນແຮງ.
• Keep the electrical components dry and free from dust.
• ກວດກາສາຍເຄເບິ້ນເປັນໄລຍະໆເພື່ອເບິ່ງອາການສວມໃສ່ ຫຼືເສຍຫາຍ.

8. ການແກ້ໄຂບັນຫາ

9. ຂໍ້ມູນຈໍາເພາະ

10. ການຮັບປະກັນແລະການສະຫນັບສະຫນູນ

FLEXISPOT offers the following warranty for your E6 Essential Electric Standing Desk:

• ການຄຸ້ມຄອງ 5 ປີ: Desk frame and motor.
• ການຄຸ້ມຄອງ 2 ປີ: Control panel and electronics.

For any assistance, questions, or warranty claims, please contact FLEXISPOT customer support through their official webເວັບໄຊທ໌ຫຼືຮ້ານຂາຍຍ່ອຍບ່ອນທີ່ຜະລິດຕະພັນໄດ້ຖືກຊື້.