Kärcher PCL 3-18 Wood Surface Brush Roller Set

1. ຜະລິດຕະພັນເກີນview

The Kärcher PCL 3-18 Wood Surface Brush Roller Set (Model 2.644-339.0) is designed for effective cleaning of wood surfaces and WPC (Wood Plastic Composite) decking. This set includes two cylindrical brushes that replace the standard brushes of the Kärcher PCL 3-18 patio cleaner, ensuring thorough and deep cleaning results.

Figure 1: Kärcher PCL 3-18 Wood Surface Brush Roller Set. This image shows the two cylindrical brushes included in the set, designed for cleaning wood and WPC surfaces.

2. ຄໍາແນະນໍາຄວາມປອດໄພ

Always observe the safety instructions provided in the main operating manual for your Kärcher PCL 3-18 patio cleaner. The following points are specific to the brush roller set:

• Ensure the PCL 3-18 device is switched off and disconnected from the power supply before installing or removing the brush rollers.
• Do not use damaged brush rollers. Inspect them for wear or damage before each use.
• ຮັກສາມື ແລະ ເຄື່ອງນຸ່ງທີ່ວ່າງໃຫ້ຫ່າງຈາກຊິ້ນສ່ວນທີ່ໝູນວຽນໃນລະຫວ່າງການປະຕິບັດງານ.
• Store brush rollers in a dry, clean place away from direct sunlight and extreme temperatures.

3. ເນື້ອໃນຊຸດ

ກວດ​ສອບ​ວ່າ​ລາຍ​ການ​ທັງ​ຫມົດ​ແມ່ນ​ມີ​ຢູ່​ໃນ​ການ​ຍົກ​ເລີກ​ການ​ຫຸ້ມ​ຫໍ່​:

• 2 x Cylindrical Brush Rollers for Wood Surfaces

Note: The Kärcher PCL 3-18 patio cleaner is sold separately and is required for the use of these brush rollers.

4. ການຕິດຕັ້ງແລະການຕິດຕັ້ງ

The brush rollers are designed for easy, tool-free replacement on your Kärcher PCL 3-18 patio cleaner.

1. ປິດພະລັງງານ: Ensure your Kärcher PCL 3-18 device is switched off and unplugged from the power source.
2. ເອົາແປງເກົ່າອອກ: Refer to your PCL 3-18 manual for specific instructions on how to release and remove the existing brush rollers. Typically, this involves pressing release buttons or levers.
3. ຕິດ​ຕັ້ງ​ແປງ​ໃຫມ່​: Align the new wood surface brush rollers with the mounting points on the PCL 3-18. Gently push them into place until they click securely. Ensure both rollers are properly seated and can rotate freely.
4. ຢືນຢັນການຕິດຕັ້ງ: Lightly tug on the installed brushes to confirm they are firmly attached before reconnecting power and operating the device.

Figure 2: Illustrative image of brush roller installation. The image depicts the process of inserting the new brush rollers into the Kärcher PCL 3-18 device until they lock into position.

5. ຄໍາແນະນໍາການດໍາເນີນງານ

Once the wood surface brush rollers are installed, operate your Kärcher PCL 3-18 patio cleaner according to its main operating manual. These brushes are optimized for:

• ພື້ນຜິວໄມ້: Ideal for cleaning wooden decks, patios, and other outdoor wood structures.
• WPC Decking: Suitable for composite decking materials, providing effective cleaning without damage.

Always test on an inconspicuous area first to ensure compatibility and desired cleaning results, especially on delicate or treated wood surfaces. Maintain a steady, even pace during cleaning to achieve uniform results.

6. ບໍາລຸງຮັກສາ

Proper maintenance extends the lifespan of your brush rollers and ensures consistent cleaning performance.

• ທໍາ​ຄວາມ​ສະ​ອາດ​ຫຼັງ​ຈາກ​ການ​ນໍາ​ໃຊ້​: After each use, remove the brush rollers from the PCL 3-18. Rinse them thoroughly with clean water to remove dirt, debris, and cleaning solution residues.
• ການກວດກາ: Regularly inspect the bristles for wear, damage, or embedded foreign objects. Remove any tangled debris.
• ການອົບແຫ້ງ: Allow the brush rollers to air dry completely before storing them. Do not store them wet, as this can lead to mildew or damage.
• ການເກັບຮັກສາ: Store the dry brush rollers in a cool, dry place, protected from direct sunlight and frost.
• ການທົດແທນ: Replace brush rollers when bristles show significant wear, are damaged, or cleaning performance diminishes.

7. ການແກ້ໄຂບັນຫາ

If you encounter issues with your brush rollers, consider the following:

For further troubleshooting or issues related to the Kärcher PCL 3-18 device itself, refer to its dedicated instruction manual or contact Kärcher customer support.

8. ຂໍ້ມູນຈໍາເພາະ

9. ການຮັບປະກັນແລະການສະຫນັບສະຫນູນ

For warranty information regarding the Kärcher PCL 3-18 Wood Surface Brush Roller Set, please refer to the warranty documentation provided with your Kärcher PCL 3-18 patio cleaner or visit the official Kärcher website. Kärcher provides customer support for product inquiries, technical assistance, and spare parts.

Karcher ຢ່າງເປັນທາງການ Webເວັບໄຊ: www.kaercher.com

Please have your product model number (2.644-339.0) and purchase details ready when contacting support.