ຄູ່ມືຜູ້ໃຊ້ເທບວັດແທກເລເຊີ Dasqua 1804-1055 2-in-1

1. ບົດແນະນຳ

This manual provides comprehensive instructions for the safe and effective use of your Dasqua 1804-1055 2-in-1 Laser Tape Measure. This device combines a traditional 5-meter tape measure with a 30-meter laser distance meter, featuring an OLED display for clear readings and USB charging capability. Please read this manual thoroughly before operating the device and retain it for future reference.

2. ຂໍ້ມູນຄວາມປອດໄພ

ຄຳເຕືອນ: This product contains a Class 2 laser. Improper use can result in hazardous radiation exposure. Always adhere to the following safety guidelines:

• ຢ່າແນມເບິ່ງແສງເລເຊີໂດຍກົງ.
• ຢ່າແນມແສງເລເຊີໃສ່ຄົນ ຫຼືສັດ.
• Avoid pointing the laser beam at reflective surfaces, as reflected beams can also be hazardous.
• Do not disassemble or modify the device. Unauthorized modifications can lead to laser radiation exposure.
• ຮັກສາອຸປະກອນໃຫ້ໄກຈາກເດັກນ້ອຍ.
• ໃຊ້ພຽງແຕ່ຕາມທີ່ອະທິບາຍໄວ້ໃນຄູ່ມືນີ້.
• Do not operate the device in explosive atmospheres or near flammable liquids or gases.

3. ຜະລິດຕະພັນເກີນview

3.1 ອົງປະກອບ ແລະການຄວບຄຸມ

Familiarize yourself with the main components and control buttons of your Dasqua 2-in-1 Laser Tape Measure.

Image: Diagram showing the Dasqua 1804-1055 device with labels for the OLED display, laser emission point, USB charging port, tape measure, lock button, and control buttons.

• ຈໍສະແດງຜົນ OLED: Shows measurements, battery status, and operating modes.
• ມາດຕະການເທບ: Traditional retractable steel tape for short-distance measurements (5m).
• Laser Emission Point: Where the laser beam exits the device.
• ພອດສາກໄຟ USB: ສໍາລັບການ recharging ຫມໍ້ໄຟພາຍໃນ.
• ປຸ່ມລັອກ: Secures the tape measure in position.

3.2 ປຸ່ມຄວບຄຸມ

ຮູບພາບ: ໃກ້ຊິດ view of the control panel on the Dasqua 1804-1055, showing the FUNC/UNITS, +/-, DIST, and CLEAR/OFF buttons.

• FUNC/UNITS: Press to cycle through measurement functions (e.g., single, continuous) or to change measurement units (meters, feet, inches).
• , Used for adding or subtracting measurements. Also used to set the measurement reference point (front or rear of the device).
• ໄກ: Activates the laser for measurement. Press once to turn on the laser, press again to take a measurement.
• CLEAR/OFF: Press once to clear the current measurement. Press and hold to power off the device.

4. ຕັ້ງຄ່າ

4.1 ການສາກອຸປະກອນ

The Dasqua 1804-1055 is equipped with a built-in Li-ion 3.7V rechargeable battery. Before first use, ensure the device is fully charged.

ຮູບພາບ: ຂ້າງ view of the Dasqua 1804-1055 showing the micro-USB charging port.

1. ຊອກຫາຊ່ອງສຽບ USB ຢູ່ດ້ານຂ້າງຂອງອຸປະກອນ.
2. Connect the provided USB cable to the device and to a standard USB power adapter (not included) or a computer USB port.
3. ຈໍສະແດງຜົນ OLED ຈະສະແດງສະຖານະການສາກໄຟ.
4. ເມື່ອສາກໄຟເຕັມແລ້ວ, ໃຫ້ຖອດສາຍ USB ອອກ.

A full charge provides approximately 2000 measurements.

4.2 ການເປີດ/ປິດ

• ເພື່ອເປີດເຄື່ອງ: ກົດ DIST ປຸ່ມ ຫຼື ລຶບລ້າງ/ປິດ ປຸ່ມ.
• ປິດເຄື່ອງ: ກົດຄ້າງໄວ້ ລຶບລ້າງ/ປິດ button for a few seconds. The device will also automatically power off after 90 seconds of inactivity to conserve battery. The laser itself turns off after 30 seconds of inactivity.

5. ຄໍາແນະນໍາການດໍາເນີນງານ

5.1 Using the Tape Measure

The integrated 5-meter tape measure functions like a standard tape measure.

ຮູບພາບ: ໃກ້ຊິດ view of the 2.5cm wide tape measure extending from the Dasqua 1804-1055 device, showing metric markings.

1. Pull the tape blade out to the desired length.
2. To lock the tape in place, slide the lock button forward.
3. To retract the tape, slide the lock button backward and gently guide the tape back into the housing.

5.2 Using the Laser Measure

The laser measure provides quick and accurate digital distance measurements up to 30 meters.

Image: The Dasqua 1804-1055 device with a visible red laser beam extending from its front, indicating active laser measurement.

ການວັດແທກໄລຍະຫ່າງດຽວ

1. ເປີດໃຊ້ອຸປະກອນ.
2. Point the laser emission point towards the target.
3. ກົດ DIST button once to activate the laser. A red laser dot will appear on the target.
4. ກົດ DIST button again to take the measurement. The distance will be displayed on the OLED screen.

ການວັດແທກຢ່າງຕໍ່ເນື່ອງ (ການຕິດຕາມ)

1. ເປີດໃຊ້ອຸປະກອນ.
2. ກົດ FUNC/UNITS button until the continuous measurement icon (often a moving line or similar) appears on the display.
3. ກົດ DIST button once to start continuous measurement. The display will update in real-time as you move the device.
4. ກົດ DIST button again to stop continuous measurement and hold the last reading.

ການປ່ຽນແປງຫນ່ວຍວັດແທກ

To switch between meters (m), feet (ft), and inches (in):

• ກົດ FUNC/UNITS button repeatedly until the desired unit is displayed.

ການຕັ້ງຄ່າຈຸດອ້າງອີງການວັດແທກ

The device can measure from its front edge or its rear edge. This is typically indicated by an icon on the display.

• ກົດ +/- button to toggle between front-edge and rear-edge measurement reference.

Addition and Subtraction of Measurements

The device supports basic arithmetic operations for measurements.

1. Take the first measurement using the DIST ປຸ່ມ.
2. ກົດ +/- button once for addition (+) or twice for subtraction (-). The corresponding symbol will appear on the display.
3. Take the second measurement. The result of the operation will be displayed.
4. To clear the calculation, press ລຶບລ້າງ/ປິດ.

6. ບໍາລຸງຮັກສາ

• ທໍາຄວາມສະອາດ: ໃຊ້ອ່ອນ, ງamp cloth to clean the device. Do not use abrasive cleaners, solvents, or immerse the device in water.
• ການເກັບຮັກສາ: ເກັບຮັກສາອຸປະກອນໄວ້ໃນບ່ອນທີ່ເຢັນ, ແຫ້ງ, ຫ່າງຈາກແສງແດດໂດຍກົງ ແລະອຸນຫະພູມທີ່ຮ້າຍກາດ.
• ແບັດເຕີຣີ: Recharge the battery regularly, even if the device is not in frequent use, to maintain battery health.
• ເລນເລເຊີ: Keep the laser emission and reception lenses clean for accurate measurements. Use a soft cloth, similar to cleaning camera lenses.

7. ການແກ້ໄຂບັນຫາ

8. ຂໍ້ມູນຈໍາເພາະ

Detailed technical specifications for the Dasqua 1804-1055 2-in-1 Laser Tape Measure.

Image: Detailed diagram of the Dasqua 1804-1055 with a list of technical specifications including measurement range, accuracy, laser class, operating conditions, and battery life.

9. ການຮັບປະກັນແລະການສະຫນັບສະຫນູນ

Dasqua products are manufactured under strict quality control. This product is inspected and approved for sale by Dasqua quality control centers.

Image: The Dasqua 1804-1055 device alongside a "Warranty Letter" and an instruction manual, indicating product quality assurance.

Dasqua takes responsibility for the quality of the product, providing a 1-year warranty against defects. Parts found to be defective may be repaired or replaced at Dasqua's sole discretion. This warranty does not apply to any product which has been subject to misuse, abuse, improper application, or which has been altered or repaired by unauthorized personnel.

For warranty claims or technical support, please contact your authorized Dasqua dealer or visit the official Dasqua webເວັບໄຊສໍາລັບຂໍ້ມູນຕິດຕໍ່.