ແນະນຳ
This manual provides essential instructions for the safe and efficient operation, setup, maintenance, and troubleshooting of your FIELDMANN FDW 201602-E High-Pressure Washer. Please read this manual thoroughly before using the appliance and keep it for future reference.
ຂໍ້ມູນຄວາມປອດໄພທີ່ສໍາຄັນ: Always follow basic safety precautions to reduce the risk of fire, electric shock, and personal injury. Ensure the appliance is used only with a suitable power supply and water source. Keep children and pets away from the operating area.
ສິນຄ້າເກີນview
Image: The FIELDMANN FDW 201602-E High-Pressure Washer, featuring its compact design, hose, and nozzle. This image illustrates the overall appearance of the product.
The FIELDMANN FDW 201602-E is a powerful electric high-pressure washer designed for various cleaning tasks. It features a robust 1600W motor, delivering a maximum pressure of 130 bar and a flow rate of 420 liters per hour. Key components include a self-priming metal pump, a 5-meter high-pressure hose, a 5-meter power cable, an adjustable nozzle, and integrated wheels for a soap bottle.
ຕັ້ງຄ່າ
- ການຫຸ້ມຫໍ່: Carefully remove all components from the packaging. Ensure all parts listed in the packing list are present and undamaged.
- ສະພາແຫ່ງ:
- Attach the high-pressure hose to the washer's outlet and the spray gun. Ensure connections are secure to prevent leaks.
- Connect the adjustable nozzle to the spray gun.
- If applicable, attach any handles or wheels according to the diagrams in the full manual (not provided here).
- ການເຊື່ອມຕໍ່ການສະຫນອງນ້ໍາ:
- Connect a garden hose (not supplied) to the water inlet of the pressure washer.
- Ensure the water supply hose is free from kinks and has an adequate flow rate. The unit features a self-priming pump, but a steady water supply is crucial.
- Turn on the water supply fully before starting the pressure washer.
- ການເຊື່ອມຕໍ່ການສະຫນອງພະລັງງານ:
- Plug the 5-meter power cable into a grounded electrical outlet (220-240V, 50/60Hz).
- Ensure the outlet is protected by a Ground Fault Circuit Interrupter (GFCI) for safety.
ຄໍາແນະນໍາການດໍາເນີນງານ
- ເລີ່ມຕົ້ນຫນ່ວຍງານ:
- With the water supply on and the unit connected to power, press the ON/OFF switch to the 'ON' position.
- Squeeze the trigger on the spray gun to release air from the system and allow water to flow through until a steady stream is achieved.
- Adjusting Pressure and Nozzle:
- The FDW 201602-E features an adjustable nozzle. Rotate the nozzle head to change the spray pattern from a concentrated jet to a wider fan spray.
- Always test the spray pattern on an inconspicuous area first to avoid damaging the surface.
- Using Detergent (Soap Bottle Wheels):
- Fill the integrated soap bottle with an appropriate pressure washer detergent.
- Attach the soap bottle to the designated inlet on the pressure washer (refer to product diagrams for exact location).
- Engage the detergent function (usually by selecting a low-pressure nozzle setting or a specific detergent nozzle, if provided).
- Apply detergent to the surface, allow it to soak, then rinse with high-pressure water.
- ການປິດ:
- Turn the ON/OFF switch to the 'OFF' position.
- ປິດການສະຫນອງນ້ໍາ.
- ບີບກະແຈໃສ່ປືນສີດເພື່ອປ່ອຍຄວາມກົດດັນທີ່ຍັງເຫຼືອຢູ່ໃນລະບົບ.
- ຖອດສາຍໄຟ ແລະ ທໍ່ນໍ້າອອກ.
ບໍາລຸງຮັກສາ
- ທໍາຄວາມສະອາດ: ຫຼັງຈາກການນຳໃຊ້ແຕ່ລະຄັ້ງ, ໃຫ້ເຊັດດ້ານນອກຂອງເຄື່ອງຊັກຜ້າດ້ວຍແຮງດັນສູງດ້ວຍຜ້າເຊັດ.amp cloth. Ensure no dirt or debris is blocking the air vents.
- Nozzle ທໍາຄວາມສະອາດ: If the nozzle becomes clogged, use the provided nozzle cleaning tool (if included) or a thin wire to clear any obstructions.
- ເຄື່ອງກອງນໍ້າເຂົ້າ: ກວດກາ ແລະ ເຮັດຄວາມສະອາດເຄື່ອງກອງນໍ້າເປັນປະຈໍາ ເພື່ອປ້ອງກັນສິ່ງເສດເຫຼືອຈາກການເຂົ້າໄປໃນປັ໊ມ.
- ການເກັບຮັກສາ:
- Drain all water from the pump, hose, and spray gun before storing.
- ເກັບຮັກສາເຄື່ອງຊັກຜ້າຄວາມກົດດັນໄວ້ໃນສະພາບແວດລ້ອມທີ່ແຫ້ງແລ້ງ, ບໍ່ມີອາກາດຫນາວ.
- Coil the high-pressure hose and power cable neatly.
- ລະດູໜາວ: In cold climates, it is crucial to protect the unit from freezing. Use a pump protector or antifreeze solution designed for pressure washers to prevent internal damage.
ການແກ້ໄຂບັນຫາ
| ບັນຫາ | ສາເຫດທີ່ເປັນໄປໄດ້ | ການແກ້ໄຂ |
|---|---|---|
| ຫນ່ວຍງານບໍ່ເລີ່ມຕົ້ນ | No power supply; ON/OFF switch is off; GFCI tripped. | Check power connection; Ensure switch is ON; Reset GFCI. |
| ຄວາມດັນຕໍ່າ ຫຼື ບໍ່ມີ | ການສະຫນອງນ້ໍາບໍ່ພຽງພໍ; ອຸດຕັນ nozzle; ອາກາດໃນປັ໊ມ; ທໍ່ kinked. | Ensure water supply is fully open; Clean nozzle; Squeeze trigger to purge air; Straighten hose. |
| ນ້ຳຮົ່ວ | ການເຊື່ອມຕໍ່ວ່າງ; O-rings ຫຼືປະທັບຕາເສຍຫາຍ. | ຮັດແຫນ້ນການເຊື່ອມຕໍ່ທັງຫມົດ; ກວດກາແລະທົດແທນ O-rings / ປະທັບຕາທີ່ເສຍຫາຍ. |
| ມໍເຕີຢຸດໃນລະຫວ່າງການປະຕິບັດງານ | Overheating; Voltage drop; Thermal overload activated. | Allow unit to cool down; Check power supply; Reduce usage time. |
ຂໍ້ມູນຈໍາເພາະ
- ຕົວແບບ: FDW 201602-E
- ສະບັບtage/ຄວາມຖີ່: 220-240 V, 50/60 Hz
- ພະລັງງານສູງສຸດ: 1600 ວ
- ຄວາມກົດດັນສູງສຸດ: 130 ບາ
- ອັດຕາການໄຫຼ: 420 ລິດຕໍ່ຊົ່ວໂມງ
- ປະເພດປັ໊ມ: Metal, Self-priming
- ຄວາມຍາວສາຍໄຟ: 5 ແມັດ
- ຄວາມຍາວທໍ່ຄວາມດັນສູງ: 5 ແມັດ
- ປະເພດ Nozzle: ສາມາດປັບໄດ້
- ຂະໜາດ (L x W x H): 35.3 x 32.2 x 50.7 cm
- ນ້ຳໜັກ: 8.46 ກິໂລ
- Compliant Specifications: CE, CSA
ການຮັບປະກັນແລະການສະຫນັບສະຫນູນ
For warranty information, technical support, or to inquire about replacement parts, please refer to the warranty card included with your product or contact the manufacturer directly. Keep your purchase receipt as proof of purchase.
ຜູ້ຜະລິດ: FIELDMANN
For further assistance, visit the official Fieldmann webເວັບໄຊ ຫຼືຕິດຕໍ່ພະແນກບໍລິການລູກຄ້າຂອງເຂົາເຈົ້າ. www.fieldmann.com
