SENIX 4QL 4-Cycle Gas Powered Tiller Cultivator (TL4QL-L1) Instruction Manual

1. ບົດແນະນຳ

This manual provides essential information for the safe operation, assembly, maintenance, and troubleshooting of your SENIX 4QL 4-Cycle Gas Powered Tiller Cultivator. Please read this manual thoroughly before operating the equipment to ensure proper use and to prevent injury or damage.

The SENIX 4QL Tiller Cultivator is designed for preparing soil for planting, weeding, and general garden maintenance. It features a 46cc 4-cycle engine, offering a 15-inch tilling width and an 8-inch tilling depth.

2. ຂໍ້ມູນຄວາມປອດໄພ

ຄຳເຕືອນ: Operating gasoline engine equipment can expose you to chemicals including engine exhaust, carbon monoxide, and benzene, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65 ຂໍ້ຄວນລະວັງ.

• Always wear appropriate personal protective equipment (PPE), including eye protection, hearing protection, gloves, and sturdy footwear, when operating the tiller.
• Keep hands, feet, and clothing away from rotating tines.
• ໃຫ້ແນ່ໃຈວ່າພື້ນທີ່ເຮັດວຽກແມ່ນຈະແຈ້ງສໍາລັບຜູ້ຢືນ, ເດັກນ້ອຍ, ແລະສັດລ້ຽງ.
• Never operate the tiller in an enclosed space due to the risk of carbon monoxide poisoning.
• Before performing any maintenance or clearing obstructions, always turn off the engine and ensure all moving parts have stopped.
• Handle fuel with extreme care. Store gasoline in an approved container in a well-ventilated area, away from ignition sources.

3. ສະພາ

The SENIX 4QL Tiller Cultivator requires minimal assembly. Typically, this involves attaching the handles and ensuring all components are securely fastened. Refer to the included assembly diagram for detailed steps.

• Handle Assembly: Attach the foldable handles to the main unit using the provided hardware. Ensure they are locked into the operating position before use.
• ການປັບລໍ້: The wheels can be adjusted. Drop the wheels when not in use for storage or transport, and raise them when tilling.

Figure 3.1: Adjustable wheels for transport and tilling.

4. ຕັ້ງຄ່າ

4.1 ນໍ້າມັນເຊື້ອໄຟ

The SENIX 4QL Tiller Cultivator is equipped with a 4-cycle engine. This means there is no need to mix gas and oil. Use fresh, unleaded gasoline with an octane rating of 87 or higher. The fuel tank capacity is 0.8 liters.

• ໃຫ້ແນ່ໃຈວ່າເຄື່ອງຈັກປິດແລະເຢັນກ່ອນທີ່ຈະຕື່ມນໍ້າມັນ.
• Refuel in a well-ventilated outdoor area.
• Do not overfill the fuel tank. Leave space for fuel expansion.

ນ້ ຳ ມັນເຄື່ອງ 4.2

The tiller includes engine oil. Before first use, ensure the engine oil level is correct. The oil tank capacity is 0.1 liters. Refer to the engine manual for specific oil type and checking procedures.

Figure 4.1: Engine view with fuel and oil components.

5. ຄໍາແນະນໍາການດໍາເນີນງານ

5.1 ການເລີ່ມຕົ້ນເຄື່ອງຈັກ

The SENIX 4QL Tiller features an auto choke and compression release for easy starting.

1. Ensure the fuel tank is filled and oil level is correct.
2. Move the choke lever to the 'START' position (if applicable, some models have auto-choke).
3. ກົດປຸ່ມ primer bulb ຫຼາຍຄັ້ງຈົນກ່ວານໍ້າມັນເຊື້ອໄຟຈະເຫັນໄດ້.
4. Pull the starter rope firmly and smoothly until the engine starts.
5. ເມື່ອເຄື່ອງຈັກເລີ່ມຕົ້ນ, ຄ່ອຍໆຍ້າຍ choke lever ໄປຕໍາແຫນ່ງ 'RUN'.

5.2 ການໄຖ

The tiller is equipped with 6 premium steel forward rotating tines, offering a 15-inch tilling width and 8-inch tilling depth.

• Ensure the adjustable wheels are in the raised position for tilling.
• ຈັບມືຈັບໃຫ້ແໜ້ນດ້ວຍມືທັງສອງ.
• Engage the throttle to begin tilling.
• Guide the tiller slowly and steadily through the soil. Do not force the machine.
• The tiller is suitable for various terrains including dry ground, hard soil, muddy ground, and weedy ground.

Figure 5.1: Tilling width and depth capabilities.

Figure 5.2: Tiller suitability for various soil types.

5.3 ການຢຸດເຄື່ອງຈັກ

To stop the engine, release the throttle and move the engine switch to the 'OFF' position.

6. ບໍາລຸງຮັກສາ

ການບໍາລຸງຮັກສາເປັນປົກກະຕິຮັບປະກັນອາຍຸຍືນແລະການປະຕິບັດທີ່ດີທີ່ສຸດຂອງ tiller ຂອງທ່ານ.

• ຄວາມສະອາດ: After each use, clean the tiller, especially the tines, to remove soil, debris, and plant matter.
• ການກວດກາ Tine: Periodically check the tines for wear, damage, or obstructions. Remove any wrapped material like wire or roots.
• ແຜ່ນ​ໃບ​ຄ້າຍ​ຄື​ເອົາ​ອອກ​ໄດ້​: The tiller features a removable blade for convenient cleaning and maintenance. Refer to the manual for instructions on safe removal and reinstallation.
• ການ​ປ່ຽນ​ແປງ​ນ​້​ໍາ​ມັນ​: Follow the manufacturer's recommendations for regular engine oil changes.
• ການກັ່ນຕອງອາກາດ: Inspect and clean or replace the air filter as needed to ensure proper engine performance.

Figure 6.1: Removable blade for convenient cleaning.

7. ການແກ້ໄຂບັນຫາ

If you encounter issues with your tiller, consult the following common troubleshooting tips:

If problems persist after attempting these solutions, please contact SENIX customer service.

8. ຂໍ້ມູນຈໍາເພາະ

9. ການຮັບປະກັນແລະການສະຫນັບສະຫນູນ

The SENIX 4QL Gas Powered Tiller Cultivator is backed by a ຮັບປະກັນ 3 ປີຈໍາກັດ. For warranty claims, technical assistance, or to order replacement parts, please contact SENIX customer service.

For further information and support, you may visit the official SENIX webເວັບໄຊ ຫຼືອ້າງອີງເຖິງລາຍລະອຽດການຕິດຕໍ່ທີ່ສະໜອງໃຫ້ຢູ່ໃນການຫຸ້ມຫໍ່ຜະລິດຕະພັນຂອງທ່ານ.

10. ຜະລິດຕະພັນເກີນview ວິດີໂອ