VONROC 1500W 216mm Electric Sliding Miter Saw Instruction Manual

1. ຄໍາແນະນໍາຄວາມປອດໄພ

Always observe basic safety precautions when using this electric sliding miter saw to reduce the risk of fire, electric shock, and serious personal injury. Read all instructions carefully before operation.

ຄວາມປອດໄພຂອງເຄື່ອງມືພະລັງງານທົ່ວໄປ

• ຄວາມປອດໄພໃນພື້ນທີ່ເຮັດວຽກ: ຮັກສາພື້ນທີ່ເຮັດວຽກໃຫ້ສະອາດ ແລະ ມີແສງສະຫວ່າງດີ. ພື້ນທີ່ວຸ້ນວາຍ ຫຼືບ່ອນມືດພາໃຫ້ເກີດອຸປະຕິເຫດ. ຫ້າມໃຊ້ເຄື່ອງມືໄຟຟ້າໃນບັນຍາກາດທີ່ລະເບີດ, ເຊັ່ນໃນທີ່ປະທັບຂອງຂອງແຫຼວ, ອາຍແກັສ, ຫຼືຝຸ່ນ.
• ຄວາມປອດໄພທາງໄຟຟ້າ: ປລັກເຄື່ອງມືໄຟຟ້າຕ້ອງກົງກັບປລັກສຽບໄຟ. ບໍ່ເຄີຍດັດແປງປລັກສຽບໃນທາງໃດກໍ່ຕາມ. ຫຼີກເວັ້ນການສໍາຜັດກັບຮ່າງກາຍກັບພື້ນດິນຫຼືຫນ້າດິນເຊັ່ນ: ທໍ່, radiators, ຂອບເຂດ, ແລະຕູ້ເຢັນ.
• ຄວາມປອດໄພສ່ວນຕົວ: Always wear eye protection (safety goggles) and hearing protection. Use a dust mask if operations create dust. Dress properly; avoid loose clothing or jewelry. Keep hair, clothing, and gloves away from moving parts.

Miter Saw ຄວາມປອດໄພສະເພາະ

• ຄວາມປອດໄພຂອງແຜ່ນໃບຄ້າຍຄື: Ensure the blade is sharp and correctly installed. Never attempt to cut freehand. Always use the material clamp and fence to secure the workpiece.
• ຄູ່ມືເລເຊີ: Do not stare directly into the laser beam. The laser is a Class 2 laser product.
• ການເກັບຂີ້ຝຸ່ນ: Connect a dust extraction device or use the provided dust bag to minimize dust exposure.
• ການ​ເລີ່ມ​ຕົ້ນ​: The saw features a soft start system. Allow the blade to reach full speed before beginning a cut.

2. ຜະລິດຕະພັນເກີນview

The VONROC 1500W 216mm Electric Sliding Miter Saw is designed for precise cutting of wood, laminate, and similar materials. It features a powerful motor, a sliding function for wider cuts, and a laser guide for accuracy.

ອົງປະກອບຫຼັກ

• Saw Head with Motor and Blade
• ລາງລົດໄຟເລື່ອນ
• Base Plate / Turntable
• Miter Scale and Lock Handle
• Bevel Adjustment and Lock
• Workpiece Clamp
• ຕາຕະລາງການຂະຫຍາຍ
• Dust Port and Dust Bag
• ຄູ່ມືເລເຊີ

ຮູບ 1: ເຕັມ view of the VONROC 1500W 216mm Electric Sliding Miter Saw.

3. ຕັ້ງຄ່າ

ການຫຸ້ມຫໍ່ແລະການປະກອບ

1. ເອົາສ່ວນປະກອບທັງຫມົດອອກຈາກການຫຸ້ມຫໍ່ຢ່າງລະມັດລະວັງ.
2. Inspect the saw for any damage that may have occurred during transit. Do not operate if damaged.
3. Attach the dust bag to the dust port at the rear of the saw head.
4. Install the extension tables on both sides of the base plate, securing them with the provided fasteners.

ການ​ຕິດ​ຕັ້ງ Saw ໄດ້

For stable operation, it is recommended to mount the miter saw to a workbench or a dedicated miter saw stand. Use the mounting holes in the base of the saw and appropriate hardware (not included) to secure it firmly.

ປັບຮົ້ວ

The fence provides support for the workpiece. Ensure it is properly aligned and secured before making any cuts. The fence can be adjusted for different cutting angles and material thicknesses.

Figure 2: The sliding mechanism and adjustable fence provide support and allow for wider cuts.

Laser Guide Alignment

The laser guide projects a line onto the workpiece, indicating the cutting path. To activate, press the laser button. If the laser line is not aligned with the blade's kerf, consult the troubleshooting section for adjustment instructions.

Figure 3: The integrated laser guide assists in precise cutting by projecting a visible line.

4. ການດໍາເນີນງານ

ຂັ້ນຕອນການຕັດຂັ້ນພື້ນຖານ

1. ວຽກ​ງານ​ທີ່​ປອດ​ໄພ​: Place the workpiece firmly against the fence and base. Use the material clamp to hold it securely.
2. ຕັ້ງມຸມ: Adjust the miter angle by loosening the lock handle, rotating the turntable to the desired angle (e.g., 0°, 15°, 22.5°, 30°, 45°), and then tightening the lock handle.
3. Set Bevel: For bevel cuts, loosen the bevel lock, tilt the saw head to the desired angle (e.g., 0° to 45°), and tighten the lock.
4. ເລີ່ມ Saw: Press the trigger switch. Allow the blade to reach full speed before lowering it into the workpiece.
5. ຕັດ: Slowly lower the saw head through the workpiece. For sliding cuts, pull the saw head towards you, lower it, and push it smoothly through the material.
6. ເລື່ອຍປ່ອຍ: ເມື່ອຕັດສຳເລັດແລ້ວ, ປ່ອຍກະທິ ແລະປ່ອຍໃຫ້ໃບມີດຢຸດໝົດ ກ່ອນທີ່ຈະຍົກຫົວເລື່ອຍຂຶ້ນ.

Figure 4: The turntable allows for precise miter angle adjustments from -45° to +45°.

Figure 5: The saw head can be tilted for accurate bevel cuts up to 45°.

ຟັງຊັນເລື່ອນ

The sliding function allows for cutting wider workpieces than a standard miter saw. To use, unlock the sliding mechanism (if applicable), pull the saw head forward, lower the blade into the material, and push the saw head smoothly back through the workpiece. Ensure the workpiece is fully supported throughout the cut.

5. ບໍາລຸງຮັກສາ

Regular maintenance ensures the longevity and safe operation of your miter saw. Always disconnect the saw from the power supply before performing any maintenance.

ການປ່ຽນແຜ່ນໃບ

1. ຕັດການເຊື່ອມຕໍ່ພະລັງງານ.
2. ຍົກຕົວປ້ອງກັນໃບມີດຂຶ້ນ.
3. Use the provided wrench to loosen the arbor nut while holding the arbor lock button.
4. Carefully remove the old blade and install the new blade, ensuring the teeth are oriented correctly.
5. ມັດໝາກແຫ້ງເປືອກແຂງໃຫ້ແໜ້ນ.

ທໍາຄວາມສະອາດ

• Regularly empty the dust bag or vacuum the dust port.
• Clean the saw's exterior with a damp ຜ້າ. ຢ່າໃຊ້ສານເຄມີທີ່ຮຸນແຮງ.
• Keep the sliding rails clean and free of debris for smooth operation.

ການລະບາຍນ້ໍາ

Apply a thin layer of light machine oil to the sliding rails periodically to ensure smooth movement of the saw head.

6. ການແກ້ໄຂບັນຫາ

7. ຂໍ້ມູນຈໍາເພາະ

8. ການຮັບປະກັນແລະການສະຫນັບສະຫນູນ

VONROC products are manufactured to high-quality standards. For warranty information, please refer to the documentation included with your purchase or visit the official VONROC webເວັບໄຊທ໌. ສຳລັບການຊ່ວຍເຫຼືອດ້ານເຕັກນິກ, ອາໄຫຼ່, ຫຼື ການສອບຖາມກ່ຽວກັບການບໍລິການ, ກະລຸນາຕິດຕໍ່ບໍລິການລູກຄ້າ VONROC ຜ່ານຊ່ອງທາງທາງການຂອງເຂົາເຈົ້າ.

ກະລຸນາຮັກສາຫຼັກຖານການຊື້ຂອງທ່ານສໍາລັບການຮຽກຮ້ອງການຮັບປະກັນໃດໆ.