GEEKVAPE Aegis Solo 2 / S100 Kit User Manual

1. ຜະລິດຕະພັນເກີນview

The GEEKVAPE Aegis Solo 2 (S100) Kit is designed for durability and performance, featuring 2nd generation Tri-Proof technology for enhanced protection against water, dust, and shock. Its compact design offers a comfortable grip while maintaining a robust metallic aesthetic.

ຄຸນ​ນະ​ສົມ​ບັດ​ທີ່​ສໍາ​ຄັນ​:

• IP68 Rating for water and dust resistance
• 1.08" Full Screen Display for clear information
• Compatible with Z Sub-Ohm 2021 Tank
• ຜົນຜະລິດສູງສຸດ 100W
• Powered by a single 18650 battery (NOT INCLUDED)

Image 1.1: The GEEKVAPE Aegis Solo 2 S100 Kit showcasing its available color options.

2. ຄູ່ມືການຕິດຕັ້ງ

2.1 ການຕິດຕັ້ງຫມໍ້ໄຟ

The Aegis Solo 2 / S100 Kit requires a single ຫມໍ້ໄຟ 18650 for operation. Please note that the battery is ບໍ່ລວມ in the package and must be purchased separately.

1. Unscrew the battery cap located at the bottom of the device by turning it counter-clockwise.
2. Insert a fully charged 18650 battery into the battery compartment, ensuring the positive (+) and negative (-) terminals align correctly as indicated inside the compartment.
3. Screw the battery cap back on clockwise until it is securely tightened.

2.2 Tank Assembly and Coil Installation

The kit includes the Z Sub-Ohm 2021 Tank. Follow these steps to assemble and prepare the tank:

1. Unscrew the base of the tank from the main body.
2. Insert a compatible Z Series coil into the tank from the bottom, ensuring it is firmly seated.
3. Screw the base back onto the tank body.
4. Screw the assembled tank onto the 510 connector of the Aegis Solo 2 mod until snug.

Image 2.1: Exploded diagram of the Z Sub-Ohm Tank components.

2.3 E-liquid Filling

To fill the Z Sub-Ohm 2021 Tank:

1. Locate the top cap of the tank.
2. Push the top cap to slide it open, revealing the filling port.
3. Insert the nozzle of your e-liquid bottle into the filling port and gently squeeze to fill the tank. Avoid filling into the central airflow tube.
4. Once filled, slide the top cap back into place until it clicks shut.
5. After filling a new coil, allow the e-liquid to soak into the coil for at least 5-10 minutes before first use to prevent dry hits.

3. ຄໍາແນະນໍາການດໍາເນີນງານ

3.1 ເປີດ/ປິດ

To turn the device on or off, rapidly press the fire button 5 ເທື່ອ ພາຍໃນ 2 ວິນາທີ.

3.2 Adjusting Wattage

Use the '+' and '-' adjustment buttons located below the screen to increase or decrease the wattage output. The wattage range is typically 5W to 100W.

3.3 Screen Display Information

The 1.08" full screen display provides essential information about your device's status:

• ລະດັບຫມໍ້ໄຟ: Indicated by an icon and percentage.
• ວັດtage: ຜົນຜະລິດພະລັງງານໃນປະຈຸບັນ.
• Coil Resistance (Ω): Resistance of the installed coil.
• ສະບັບtage (V): ຜົນຜະລິດ voltage.
• Puff Counter: ຕິດຕາມຈໍານວນຂອງ puffs ປະຕິບັດ.

ຮູບພາບທີ 3.1: ໄລຍະໃກ້ view of the Aegis Solo 2 S100's 1.08" display screen.

3.4 Locking/Unlocking the Device

The Aegis Solo 2 features a convenient A-Lock switch on the side of the device. Slide the switch up to lock the device and prevent accidental firing or wattage adjustments. Slide it down to unlock.

4. ບໍາລຸງຮັກສາ

4.1 ການທໍາຄວາມສະອາດ

• Regularly clean the 510 connector on the mod and the base of the tank with a dry cloth or cotton swab to ensure good conductivity.
• For the tank, disassemble it and rinse the glass and metal parts (excluding the coil) with warm water. Allow all parts to dry completely before reassembly.

4.2 Coil Replacement

Coils are consumable parts and need to be replaced regularly, typically every 1-2 weeks depending on usage and e-liquid. Replace the coil when you notice a burnt taste, reduced vapor production, or diminished flavor.

1. Ensure the tank is empty of e-liquid.
2. Unscrew the tank from the mod.
3. Unscrew the base of the tank.
4. Pull out the old coil from the tank.
5. Insert a new Z Series coil firmly into place.
6. Reassemble the tank and fill with e-liquid, allowing time for the new coil to prime.

4.3 ການເບິ່ງແຍງທົ່ວໄປ

• Keep the device away from extreme temperatures (hot or cold) and direct sunlight.
• ເກັບຮັກສາອຸປະກອນໄວ້ໃນບ່ອນແຫ້ງເມື່ອບໍ່ໄດ້ໃຊ້ງານ.
• Avoid dropping the device, despite its shock resistance, to prevent internal damage.

5. ການແກ້ໄຂບັນຫາ

5.1 ອຸປະກອນບໍ່ເປີດ

• Ensure the 18650 battery is correctly inserted with the correct polarity.
• Check if the battery is charged. If not, charge it using an external battery charger.
• Press the fire button 5 times rapidly to power on the device.

5.2 No Vapor or Weak Vapor

• Check the e-liquid level in the tank.
• Ensure the coil is properly installed and not burnt out. Replace if necessary.
• ປັບວັດtage to a suitable level for your coil's resistance.
• Ensure the device is not locked (check A-Lock switch).

5.3 Leaking Tank

• Ensure all tank components are securely tightened, especially the coil and base.
• Check the O-rings for damage or displacement. Replace if needed.
• ຫຼີກເວັ້ນການເຕີມເຕັມຖັງ.
• Ensure the top cap is fully closed after filling.

5.4 ໜ້າຈໍບໍ່ສະແດງ

• ໃຫ້ແນ່ໃຈວ່າອຸປະກອນເປີດຢູ່.
• ກວດເບິ່ງການສາກໄຟ.
• If the issue persists, try removing and reinserting the battery.

6. ຂໍ້ມູນຈໍາເພາະ

7. ການຮັບປະກັນແລະການສະຫນັບສະຫນູນ

For warranty information and technical support, please refer to the official GEEKVAPE webເວັບໄຊ ຫຼືຕິດຕໍ່ຮ້ານຄ້າປີກຈາກຜູ້ທີ່ທ່ານຊື້ຜະລິດຕະພັນ. ຮັກສາຫຼັກຖານການຊື້ຂອງທ່ານສໍາລັບການຮຽກຮ້ອງການຮັບປະກັນໃດໆ.

This product is intended for adult users only. Please adhere to all local laws and regulations regarding vaping products.