ແນະນຳ
This manual provides instructions for the safe and efficient operation of your CREWORKS Ultrasonic Cleaner, Model SX-DUCV106. This device utilizes ultrasonic cavitation to thoroughly clean various items, including vinyl records, jewelry, glasses, and more. Please read this manual carefully before use and retain it for future reference.

Image: Before and After Cleaning Demonstration
ຄໍາແນະນໍາຄວາມປອດໄພ
ຄໍາເຕືອນ: ການບໍ່ປະຕິບັດຕາມຄໍາແນະນໍາດ້ານຄວາມປອດໄພເຫຼົ່ານີ້ອາດຈະເຮັດໃຫ້ໄຟຟ້າຊ໊ອກ, ໄຟໄຫມ້, ຫຼືບາດເຈັບສາຫັດ.
- Only use with grounded electrical outlets.
- ຢ່າ disassemble ຫນ່ວຍບໍລິການ. ອ້າງອີງການບໍລິການທັງໝົດໃຫ້ກັບບຸກຄະລາກອນທີ່ມີຄຸນວຸດທິ.
- Do not operate the unit without water in the tank. Ensure the water level is between the MIN and MAX marks.
- Do not use flammable, explosive, or corrosive cleaning solutions.
- ຫຼີກເວັ້ນການສໍາຜັດກັບອົງປະກອບໄຟຟ້າດ້ວຍມືປຽກ.
- ຮັກສາເຄື່ອງໃຫ້ຫ່າງຈາກເດັກນ້ອຍ ແລະສັດລ້ຽງ.
- Ensure proper ventilation during operation, as the unit can generate heat.
- ຖອດປລັກເຄື່ອງອອກຈາກແຫຼ່ງພະລັງງານກ່ອນການທຳຄວາມສະອາດ ຫຼື ການບຳລຸງຮັກສາ.
ສ່ວນປະກອບຂອງຜະລິດຕະພັນ
The CREWORKS Ultrasonic Cleaner package includes the following items:
- Ultrasonic Cleaner Unit with Stainless Steel Tank
- ຝາປິດ
- ສາຍໄຟ
- Cleaning Basket (for small items)
- Vinyl Record Washing Rack (holds up to three 7" or 12" records)
- Vinyl Record Drying Rack
- ທໍ່ລະບາຍນໍ້າ

Image: Included Components
ຕັ້ງຄ່າ
- Place the ultrasonic cleaner on a stable, level, and heat-resistant surface. Ensure adequate ventilation around the unit.
- ປິດປ່ຽງລະບາຍນ້ໍາຢ່າງປອດໄພ.
- Fill the stainless steel tank with water. For enhanced cleaning, a small amount of appropriate cleaning solution can be added. Do not exceed the maximum fill line.
- Connect the power cord to the unit and then to a grounded electrical outlet.

Image: Ultrasonic Cleaner Unit
ການດໍາເນີນງານ
General Cleaning Procedure
- After filling the tank (see Setup), place the items to be cleaned into the cleaning basket. Ensure items are fully submerged but not touching the bottom of the tank.
- ໃສ່ກະຕ່າເຮັດຄວາມສະອາດລົງໃນຖັງ.
- Set the desired cleaning time using the 'TIME +' and 'TIME -' buttons on the control panel. The timer can be set up to 30 minutes.
- Set the desired temperature using the 'TEMP +' and 'TEMP -' buttons. The heater can warm the solution up to 175°F (79°C). Heating can improve cleaning effectiveness for some items.
- Press the 'ON/OFF' button for the ultrasonic function to start cleaning. Press the 'ON/OFF' button for the heater function if heating is desired.
- ເຄື່ອງຈະຢຸດອັດຕະໂນມັດເມື່ອເວລາທີ່ກຳນົດໄວ້ໝົດອາຍຸ.
- Carefully remove the cleaning basket and rinse the cleaned items with clean water.
Vinyl Record Cleaning Procedure
- Assemble the vinyl record washing rack and place it over the tank.
- Carefully mount up to three 7-inch or 12-inch vinyl records onto the rack, ensuring the labels are protected from the cleaning solution.
- Lower the records into the tank, ensuring the grooves are submerged in the cleaning solution.
- Set the desired cleaning time and temperature as described in the General Cleaning Procedure.
- Start the ultrasonic cleaning and heating functions.
- Once cleaning is complete, carefully lift the records from the tank.
- Place the cleaned records onto the included drying rack to air dry completely before storage or playback.

Image: Vinyl Records in Cleaning Rack

Image: Record Drying Rack
ແຜງຄວບຄຸມຜ່ານview
The digital control panel allows precise setting of cleaning parameters.
- SET TEMP (°C) / ACTUAL TEMP (°C): Displays the set temperature and the current actual temperature of the solution.
- ອຸນຫະພູມ + / ອຸນຫະພູມ -: Buttons to increase or decrease the target temperature.
- ON/OFF (Heater): ເປີດ ຫຼື ປິດຟັງຊັນຄວາມຮ້ອນ.
- SET TIME (MINUTES SECONDS): Displays the set cleaning duration.
- TIME + / TIME -: Buttons to increase or decrease the cleaning time.
- ON/OFF (Ultrasonic): ເປີດ ຫຼື ປິດການໃຊ້ງານໜ້າທີ່ທຳຄວາມສະອາດດ້ວຍ ultrasonic.

Image: Digital Control Panel
ບໍາລຸງຮັກສາ
- ການລະບາຍຖັງ (Draining the Tank): After each use, especially if using cleaning solutions, drain the tank by opening the drain valve. Place a container underneath to collect the liquid.
- ທໍາຄວາມສະອາດຖັງໄດ້: Rinse the stainless steel tank with clean water. Wipe the interior and exterior surfaces with a soft, damp ຜ້າ. ຢ່າໃຊ້ເຄື່ອງເຮັດຄວາມສະອາດຂັດຫຼືຂົນເຫຼັກ.
- ການເກັບຮັກສາ: Ensure the unit is completely dry before storing. Store in a cool, dry place away from direct sunlight and moisture.
- ການກວດກາປົກກະຕິ: Periodically check the power cord for any damage. Ensure the drain valve operates smoothly.
ການແກ້ໄຂບັນຫາ
| ບັນຫາ | ສາເຫດທີ່ເປັນໄປໄດ້ | ການແກ້ໄຂ |
|---|---|---|
| ຫນ່ວຍບໍລິການບໍ່ເປີດ. | No power supply; Power cord not connected; Faulty outlet. | Check power cord connection; Test outlet with another device; Ensure unit is plugged into a grounded outlet. |
| ໜ້າທີ່ຂອງ ultrasonic ບໍ່ເຮັດວຽກ. | Ultrasonic function not activated; Insufficient water in tank. | Press the ultrasonic 'ON/OFF' button; Ensure water level is above MIN mark. |
| Heater not working or overheating. | Heater function not activated; Sensor malfunction; Prolonged operation. | Press the heater 'ON/OFF' button; Allow unit to cool down; If overheating persists, discontinue use and contact support. |
| ຜົນໄດ້ຮັບການເຮັດຄວາມສະອາດບໍ່ດີ. | Incorrect cleaning solution; Insufficient cleaning time/temperature; Items not properly submerged. | Use appropriate cleaning solution for item type; Increase cleaning time or temperature; Ensure items are fully submerged. |
| Unit is excessively noisy. | Normal operation sound; Items touching tank walls. | Some operational noise is normal for ultrasonic cleaners. Ensure items are in the basket and not directly touching the tank. Consider operating in a well-ventilated area away from sensitive ears. |
ຂໍ້ມູນຈໍາເພາະ
- ຕົວແບບ: SX-DUCV106
- ຄວາມອາດສາມາດຂອງຖັງ: 1.6 ກາລອນ (6 ລິດ)
- ພະລັງງານ Ultrasonic: 180W
- ພະລັງງານຄວາມຮ້ອນ: ສູງເຖິງ 200W
- ຄວາມຖີ່ຂອງການ ultrasonic: 40 kHz
- ການຕັ້ງເວລາຈັບເວລາ: 0-30 minutes (Digital)
- ການຕັ້ງຄ່າອຸນຫະພູມ: Up to 175°F (79°C) (Digital)
- ວັດສະດຸຖັງ: 304 ສະແຕນເລດ
- ຂະໜາດຜະລິດຕະພັນ: ປະມານ 12.8 x 6.9 x 10.2 ນິ້ວ
- ນ້ໍາຫນັກລາຍການ: ປະມານ 10.5 ປອນ

ຮູບພາບ: ຂະຫນາດຜະລິດຕະພັນ
ການຮັບປະກັນແລະການສະຫນັບສະຫນູນ
CREWORKS products are designed for durability and performance. For any questions, technical assistance, or warranty claims, please contact CREWORKS customer service. Please have your model number (SX-DUCV106) and purchase information ready when contacting support.
For the most up-to-date contact information, please visit the official CREWORKS webເວັບໄຊ ຫຼືອ້າງອີງໃສ່ເອກະສານການຊື້ຂອງທ່ານ.





