ATEM POWER 12V 30A DC to DC Battery Charger Instruction Manual

1. ບົດແນະນຳ

The ATEM POWER 12V 30A DC to DC Battery Charger is designed for efficient and reliable charging of various battery types in off-grid and mobile applications. This device supports Lead Acid, AGM, Gel, Calcium, and LiFePO4 batteries, offering a versatile solution for dual battery setups. It features an intelligent 3-stage charging process to optimize battery performance and extend lifespan, along with multiple protection designs for safe operation.

ຮູບ 1.1: ດ້ານຫນ້າ view of the ATEM POWER 12V 30A DC to DC Battery Charger.

Figure 1.2: The charger is ideal for 4WDs, caravans, RVs, trucks, campers, trailers, ຄampervans, commercial vehicles, and boats.

2. ຂໍ້ມູນຄວາມປອດໄພ

Always prioritize safety when installing and operating electrical equipment. Read and understand all instructions before use.

• ປົກປັກຮັກສາ Polar ປີ້ນກັບກັນ: The charger is equipped with reverse polarity protection. Ensure correct positive (+) and negative (-) connections to prevent damage.
• Overvoltage ການປົກປ້ອງ: ການກໍ່ສ້າງໃນ overvoltage protection safeguards the charger and connected batteries from excessive voltage.
• ການປົກປ້ອງອຸນຫະພູມເກີນ: The unit includes over-temperature protection to prevent overheating during operation.
• Charge Timeout: A charge timeout feature prevents overcharging.
• Lithium Battery BMS Safeguards: Specific safeguards are integrated for LiFePO4 batteries to work with their Battery Management System (BMS).
• Fusion ທີ່​ເຫມາະ​ສົມ​: Always use properly rated fuses on both input and output lines as recommended in the installation section to protect against short circuits and overcurrent.
• ການລະບາຍອາກາດ: Ensure adequate ventilation around the charger to prevent heat buildup.
• ສະພາບແວດລ້ອມແຫ້ງ: Install the charger in a dry area, free from moisture and direct water exposure.
• ການຕິດຕັ້ງແບບມືອາຊີບ: If unsure about any installation steps, consult a qualified professional.

3. ຕັ້ງຄ່າ

Proper installation is crucial for the safe and efficient operation of your ATEM POWER DC to DC Battery Charger. Follow these steps carefully.

3.1 Unboxing ແລະອົງປະກອບ

Figure 3.1: The package includes the DC to DC Dual Battery Charger, user manual, and Anderson-style plugs.

3.2 ການເຊື່ອມຕໍ່ສາຍໄຟ

The charger is equipped with Anderson-style plugs for convenient wiring. Refer to the diagram below for correct connections.

Figure 3.2: Anderson-style plug connections. 1: Yellow: Output (+), 2: Black: GND, 3: Red: DC Input (+), 4: Black: GND, 5: ACC Ignition Line.

Connect the charger to your vehicle's start battery, solar panel (if applicable), and house battery bank as shown in the installation diagram.

Figure 3.3: Wiring diagram showing connections to 12V Start Vehicle Battery, MPPT Solar Panel Input (25V/VOC), and 12V House Battery Bank. Optional fuses/breakers are recommended.

For smart alternators, connect the ACC Ignition Wire (red) to the vehicle's ignition system to ensure proper operation.

3.3 ການ​ຕິດ​ຕັ້ງ Examples

The ATEM POWER DC to DC charger is suitable for various vehicle types. Below are typical installation scenarios.

Figure 3.4: Caravan installation combines solar and vehicle power. 4WD installation is engineered for in-vehicle or under-bonnet use with traditional or smart alternators.

3.4 ການຕິດຕັ້ງວິດີໂອ

4. ຄໍາແນະນໍາການດໍາເນີນງານ

The ATEM POWER DC to DC Battery Charger is designed for user-friendly operation with advanced features to manage your battery system.

4.1 Battery Compatibility and Charging Profiles

Figure 4.1: The charger is compatible with AGM, Gel, Lead-Acid, and LiFePO4 battery types.

The charger is compatible with a wide range of battery types: AGM, Gel, Calcium, Lead Acid, and LiFePO4 batteries. It automatically applies the suitable charging profile to prolong their lifespan. Use the intuitive "SELECT" button on the unit to switch between battery types if manual selection is required or to re-select during charging.

4.2 Intelligent 3-Stage ສາກໄຟ

The intelligent 3-stage charging process optimizes efficiency and maximizes the lifespan of your batteries. This ensures they remain in top condition for extended periods.

4.3 LiON Mode for LiFePO4 Batteries

The intelligent LiON mode automatically activates sleeping LiFePO4 batteries, ensuring prolonged and reliable use.

4.4 Reverse Charging Function

The reverse charging feature allows you to charge in both directions. Activate the reverse charge button to revive a flat start battery using your auxiliary battery, keeping your starter battery fully charged for off-roading experiences.

Figure 4.2: The 'Reverse Charge' button allows for charging a flat start battery from the auxiliary battery.

5. ບໍາລຸງຮັກສາ

Regular maintenance ensures the longevity and optimal performance of your ATEM POWER DC to DC Battery Charger.

• ຄວາມສະອາດ: Keep the charger clean and free from dust and debris. Use a dry cloth for cleaning.
• ການເຊື່ອມຕໍ່: ກວດເບິ່ງທຸກສາຍເຊື່ອມຕໍ່ແຕ່ລະໄລຍະເພື່ອຮັບປະກັນວ່າພວກມັນປອດໄພ ແລະ ບໍ່ມີການກັດກ່ອນ. ການເຊື່ອມຕໍ່ວ່າງສາມາດນໍາໄປສູ່ການປະຕິບັດທີ່ບໍ່ດີຫຼືຄວາມເສຍຫາຍ.
• ການລະບາຍອາກາດ: Ensure that the ventilation openings on the charger are not blocked to allow for proper heat dissipation.
• ເງື່ອນໄຂສິ່ງແວດລ້ອມ: Avoid exposing the charger to extreme temperatures, direct sunlight, or excessive moisture.
• ສຸຂະພາບຫມໍ້ໄຟ: Monitor the health of your batteries. The 3-stage charging and LiON mode help maintain battery health, but regular checks are still recommended.

6. ການແກ້ໄຂບັນຫາ

This section provides solutions to common issues you might encounter with your charger.

• ເຄື່ອງສາກບໍ່ໄດ້ເປີດໃຊ້ງານ:
  • Check all input and output connections for secure fit.
  • Verify that the vehicle's ignition is on if using the ACC ignition line.
  • ຮັບປະກັນການປ້ອນຂໍ້ມູນ voltage from the alternator or solar panel is within the specified range.
  • Check fuses/breakers on all lines.
• No Charge Output:
  • Confirm the correct battery type is selected on the charger.
  • Check for any fault indicators on the charger's display.
  • Ensure the auxiliary battery is not fully charged, which would stop the charging cycle.
• ຄວາມຮ້ອນເກີນ:
  • ຮັບປະກັນການລະບາຍອາກາດທີ່ພຽງພໍຢູ່ຮອບເຄື່ອງສາກ.
  • Check for any obstructions blocking the cooling fins.
  • Reduce the load if possible, or ensure the charger is not operating in extreme ambient temperatures.
• ສັນຍານເຕືອນໄພຂົ້ວໂລກປີ້ນ:
  • Immediately disconnect the charger.
  • Verify all positive (+) and negative (-) connections are correctly made to both the input and output batteries.

7. ຂໍ້ມູນຈໍາເພາະ

8. ການຮັບປະກັນແລະການສະ ໜັບ ສະ ໜູນ

8.1 ຂໍ້ມູນການຮັບປະກັນ

The ATEM POWER 12V 30A DC to DC Battery Charger comes with a ຮັບປະກັນ 1 ປີ ຈາກວັນທີ່ຊື້. ການຮັບປະກັນນີ້ກວມເອົາຂໍ້ບົກພ່ອງຂອງວັດສະດຸແລະການເຮັດວຽກພາຍໃຕ້ການນໍາໃຊ້ປົກກະຕິ. ກະລຸນາຮັກສາຫຼັກຖານການຊື້ຂອງທ່ານສໍາລັບການຮຽກຮ້ອງການຮັບປະກັນ.

8.2 ສະຫນັບສະຫນູນລູກຄ້າ

For technical assistance, troubleshooting, or warranty inquiries, please contact ATEM POWER customer support. Refer to the contact information provided in your product packaging or visit the official ATEM POWER webເວັບໄຊທ໌ສໍາລັບລາຍລະອຽດສະຫນັບສະຫນູນທີ່ທັນສະໄຫມທີ່ສຸດ.