Satco TL104

Satco Nuvo TL104 Track Live End Current Limiter (5 Amps, White) Instruction Manual

ແນະນຳ

This manual provides essential information for the safe installation, operation, and maintenance of the Satco Nuvo TL104 Track Live End Current Limiter. Please read these instructions thoroughly before installation and retain them for future reference.

ຄຸນ​ນະ​ສົມ​ບັດ​ທີ່​ສໍາ​ຄັນ​:

ຂໍ້ມູນຄວາມປອດໄພ

WARNING: Risk of electric shock. Installation should only be performed by a qualified electrician.

ເນື້ອໃນຊຸດ

ການຕິດຕັ້ງແລະການຕິດຕັ້ງ

The TL104 Live End Current Limiter is designed for direct connection to a 120V, 60Hz power source and integration into a Satco track lighting system. An optional canopy plate (Satco SKUs TP212/TP213) may be used for direct junction box mounting.

  1. ການຕັດການເຊື່ອມຕໍ່ໄຟຟ້າ: Before beginning any installation, ensure the main power supply to the circuit is turned OFF at the circuit breaker.
  2. ກະກຽມສາຍໄຟ: If using the knockout for direct electrical feed, remove the appropriate knockout. Connect the pre-wired leads from the current limiter to the building's electrical supply wires (black to live, white to neutral, green/bare to ground) according to local electrical codes. Secure connections with approved wire connectors.
  3. Mounting to Track: Align the live end connector with the end of the track section. Ensure the polarity is correct (usually indicated by markings on the track and connector).
  4. ການເຊື່ອມຕໍ່ທີ່ປອດໄພ: Push the live end firmly into the track until it clicks into place. Tighten any securing screws on the connector to ensure a stable and continuous electrical connection.
  5. Optional Junction Box Mounting: If using an optional canopy plate for junction box mounting, follow the instructions provided with the canopy plate to secure the limiter to the junction box and then to the track.
  6. ກວດສອບຄັ້ງສຸດທ້າຍ: Double-check all connections and ensure the unit is securely mounted.
  7. ຟື້ນຟູພະລັງງານ: ເມື່ອການຕິດຕັ້ງສຳເລັດ ແລະ ກວດສອບແລ້ວ, ໃຫ້ຟື້ນຟູໄຟຟ້າຢູ່ທີ່ເບຣກເກີ.
ໃກ້ຊິດ view of the Satco Nuvo TL104 Track Live End Current Limiter, showing the connection mechanism and a screw on the side.

Image: Close-up of the live end connector for track integration.

ຂ້າງ view of the Satco Nuvo TL104 Track Live End Current Limiter with dimensions labeled in inches and millimeters.

Image: Product dimensions for planning installation space.

ລົງລຸ່ມ view of the Satco Nuvo TL104 Track Live End Current Limiter, showing the internal wiring and connection points.

ຮູບພາບ: ເທິງ view illustrating internal components and wiring access.

ຈົບ view of the Satco Nuvo TL104 Track Live End Current Limiter, highlighting the track connection interface.

Image: End view showing the track connection interface.

ຄໍາແນະນໍາການດໍາເນີນງານ

The Satco Nuvo TL104 Track Live End Current Limiter functions as a protective device within your track lighting system. Once properly installed and connected to power, it will automatically electrify the track and limit the total current draw to 5 Amps.

Close-up of the ON/OFF rocker switch on the Satco Nuvo TL104 Track Live End Current Limiter.

Image: ON/OFF rocker switch for controlling power to the track.

ບໍາລຸງຮັກສາ

The Satco Nuvo TL104 Track Live End Current Limiter requires minimal maintenance. Regular inspection is recommended to ensure optimal performance and safety.

ການແກ້ໄຂບັນຫາ

If your track lighting system is not functioning as expected, refer to the following common issues and solutions:

ບັນຫາສາເຫດທີ່ເປັນໄປໄດ້ການແກ້ໄຂ
No power to track lights.1. ສະວິດໄຟປິດ.
2. breaker ວົງຈອນ tripped.
3. ຂາດການເຊື່ອມຕໍ່ໄຟຟ້າ.
1. Ensure the ON/OFF switch on the limiter is in the 'ON' position.
2. Reset the circuit breaker on the limiter (if applicable) or at the main panel. Reduce load if it trips again.
3. Disconnect power and check all wiring connections. Tighten as necessary.
Circuit breaker repeatedly trips.Overload on the track system (total wattage ເກີນ 5 Amps).ຫຼຸດຈຳນວນ ຫຼື ວັດtage of fixtures on the track. Ensure total current draw does not exceed 5 Amps (600 Watts at 120V).
Unit is warm to the touch.ການດໍາເນີນງານປົກກະຕິພາຍໃຕ້ການໂຫຼດ.This can be normal. If it is excessively hot or emits a burning smell, immediately disconnect power and consult a qualified electrician.

If troubleshooting steps do not resolve the issue, contact a qualified electrician or Satco customer support.

ຂໍ້ມູນຈໍາເພາະ

ຄຸນສົມບັດຂໍ້ມູນຈໍາເພາະ
ຍີ່ຫໍ້Satco
ຊື່ຕົວແບບTL104
ການຈັດອັນດັບປັດຈຸບັນ5 Amps
ສີສີຂາວ
ວັດສະດຸພາດສະຕິກ
ສະບັບtage120 ໂວນ
ຄວາມຖີ່60 Hz
ວັດສູງສຸດtage Load600 ວັດ (ທີ່ 120V)
ການນຳໃຊ້ພາຍໃນ/ນອກພາຍໃນ
ປະເພດການຕິດຕັ້ງCeiling Mount (Track System)
ປະເພດສະຫຼັບRocker
ຂະໜາດສິນຄ້າ6.63 x 2.5 x 1.25 ນິ້ວ
ນ້ໍາຫນັກລາຍການ8 ອອນ
UPC045923511240

ຮັບປະກັນ

This Satco Nuvo TL104 Track Live End Current Limiter is covered by a ຮັບປະກັນ 1 ປີຈໍາກັດ from the date of purchase. This warranty covers defects in materials and workmanship under normal use. It does not cover damage resulting from improper installation, misuse, abuse, or unauthorized modifications. For warranty claims, please retain your proof of purchase and contact Satco customer support.

ສະຫນັບສະຫນູນ

For technical assistance, replacement parts, or further information regarding your Satco Nuvo TL104 Track Live End Current Limiter, please contact Satco customer support through their official webເວັບໄຊ ຫຼືຂໍ້ມູນການຕິດຕໍ່ທີ່ສະໜອງໃຫ້ກັບການຊື້ຂອງທ່ານ.

ຊັບພະຍາກອນອອນໄລນ໌: www.satco.com

ເອກະສານທີ່ກ່ຽວຂ້ອງ - TL104

ກ່ອນview Omni-Directional LED T8 Tubes ການຕິດຕັ້ງແລະຄໍາແນະນໍາຄວາມປອດໄພ | SATCO
ຄູ່ມືການຕິດຕັ້ງແລະຄວາມປອດໄພທີ່ສົມບູນແບບສໍາລັບ SATCO Omni-Directional LED T8 Tubes (Models S16430-S16443). ຮຽນຮູ້ວິທີການປັບປຸງອຸປະກອນ fluorescent ທີ່ມີຢູ່ແລ້ວຢ່າງປອດໄພດ້ວຍທໍ່ LED ທີ່ມີປະສິດທິພາບພະລັງງານເຫຼົ່ານີ້, ລວມທັງແຜນວາດສາຍໄຟແລະຄໍາເຕືອນທີ່ສໍາຄັນ.
ກ່ອນview ໄຟສາຍ Satco Starfish WiFi ອັດສະລິຍະ ສຳລັບພາຍໃນ/ນອກອາຄານ ຮຸ່ນ S11272 ຄຳແນະນຳກ່ຽວກັບການຕິດຕັ້ງ ແລະ ຄວາມປອດໄພ
ຄູ່ມືການຕິດຕັ້ງ ແລະ ຄວາມປອດໄພທີ່ຄົບຖ້ວນສຳລັບໄຟສາຍ Satco Starfish WiFi Smart ສຳລັບພາຍໃນ/ນອກອາຄານ (ຮຸ່ນ S11272). ກວມເອົາຄຳເຕືອນ, ເນື້ອໃນ, ການຕັ້ງຄ່າແບບເທື່ອລະຂັ້ນຕອນ, ແລະ ການເຊື່ອມຕໍ່ແອັບ.
ກ່ອນview Starfish WiFi Smart 16' Outdoor Strip Light Installation and Safety Instructions (Model S11265)
ໄດ້​ຮັບ​ຄໍາ​ແນະ​ນໍາ​ການ​ຕິດ​ຕັ້ງ​ໂດຍ​ລະ​ອຽດ​ແລະ​ຄວາມ​ປອດ​ໄພ​ສໍາ​ລັບ Satco Nuvo Starfish WiFi Smart 16 ຟຸດ​ໄຟ LED ກາງ​ແຈ້ງ (Model S11265). ຮຽນ​ຮູ້​ກ່ຽວ​ກັບ​ຄວາມ​ປອດ​ໄພ​ໄຟ​ຟ້າ​, ການ​ຕິດ​ຕັ້ງ​ທີ່​ເຫມາະ​ສົມ​, ແລະ​ການ​ເຊື່ອມ​ຕໍ່ app​.
ກ່ອນview ຄູ່ມືຜູ້ໃຊ້ ແລະ ຄຳແນະນຳໃນການຕິດຕັ້ງໂຄມໄຟຕິດຝາຜະໜັງ LED ອັດສະລິຍະ Satco Starfish East River
ຄູ່ມືທີ່ຄົບຖ້ວນສຳລັບໂຄມໄຟຕິດຝາຜະໜັງ LED ອັດສະລິຍະ Satco Starfish East River Outdoor, ເຊິ່ງກວມເອົາການຕັ້ງຄ່າ, ການຕິດຕັ້ງ, ການຄວບຄຸມແອັບ, ແລະ ລາຍລະອຽດດ້ານເຕັກນິກ. ມີ Wi-Fi, Bluetooth, ຄວາມເຂົ້າກັນໄດ້ຂອງຜູ້ຊ່ວຍສຽງ, ແລະ ໄຟ RGB/ສີຂາວທີ່ສາມາດປັບແຕ່ງໄດ້.
ກ່ອນview Starfish Smart Plug/Dimmer S11270 Installation and Safety Instructions
Detailed installation and safety instructions for the Satco Nuvo Starfish Smart Plug/Dimmer (Model S11270), including product parameters, app connection, warnings, and FCC compliance.
ກ່ອນview Satco Hi-Pro LED Lamps 120-277V ຄໍາແນະນໍາການຕິດຕັ້ງແລະຄວາມປອດໄພ
ຄູ່ມືການຕິດຕັ້ງແລະຄວາມປອດໄພທີ່ສົມບູນແບບສໍາລັບ Satco Hi-Pro LED Lamps (Models S13130-S13136), ກວມເອົາແຜນຜັງສາຍ, ການເຕືອນໄພຄວາມປອດໄພ, ແລະຂັ້ນຕອນການຕິດຕັ້ງສໍາລັບການທົດແທນ CFL ແລະ HPS / HID lamps.