1. ບົດແນະນຳ
This manual provides instructions for the installation, operation, and maintenance of your Sena Parani M10 Bluetooth Motorcycle Headset. The Parani M10 allows for seamless communication and entertainment while riding, featuring Bluetooth intercom capabilities and smartphone connectivity for music, GPS, and calls. Please read this manual thoroughly before using the device to ensure proper function and safety.
2. ເນື້ອໃນຊຸດ
The Parani M10 package typically includes the following components:
- Parani M10 Main Unit
- ໄມໂຄຣໂຟນບູມແບບມີສາຍ
- Speakers (pair)
- ໝວກກັນກະທົບ Clamp ຊຸດ
- ສາຍສາກ USB
- ແຜ່ນລຳໂພງ
- Hook ແລະ Loop Fasteners ສໍາລັບລໍາໂພງ
- ຄູ່ມືຜູ້ໃຊ້ (ເອກະສານນີ້)
Figure 2.1: Parani M10 complete kit showing the main unit, wired microphone, and speakers.
3. ຜະລິດຕະພັນເກີນview
Familiarize yourself with the main unit's components and controls.
Figure 3.1: Parani M10 Main Unit Controls and Ports.
- Jog Dial: Used for volume control, menu navigation, and various functions.
- ປຸ່ມຫຼາຍຟັງຊັນ: Primary button for power, pairing, and call management.
- ຈໍ LCD: Shows battery status, volume level, intercom pairing status, and other operational information.
- DC Power Charging & Firmware Upgrade Port: For charging the device and updating its firmware.
- Speakers and Microphone Port: Connection point for the wired speakers and microphone.
4. ການຕິດຕັ້ງແລະການຕິດຕັ້ງ
The Parani M10 is designed for easy installation on most motorcycle helmets.
4.1 Attaching the Main Unit to the Helmet
- ເລືອກສະຖານທີ່ທີ່ເໝາະສົມຢູ່ເບື້ອງຊ້າຍຂອງໝວກກັນກະທົບຂອງທ່ານສຳລັບ clamp ຊຸດ.
- ຄາຍສະກູໃສ່ໝວກກັນກະທົບອອກamp kit and slide it between the helmet shell and the inner padding. Ensure it is securely fastened.
- Slide the Parani M10 main unit onto the clamp ຈົນກ່ວາມັນກົດເຂົ້າໄປໃນສະຖານທີ່.
Figure 4.1: Parani M10 unit installed on a helmet.
4.2 ການຕິດຕັ້ງລຳໂພງ ແລະ ໄມໂຄຣໂຟນ
- Attach the hook and loop fasteners to the inside of your helmet, aligning them with your ears.
- Press the speakers onto the fasteners. Ensure the speakers are positioned directly over your ears for optimal audio quality.
- Attach the wired boom microphone to the inside of the helmet, positioning it close to your mouth but not directly in front of it to avoid wind noise.
- Route the speaker and microphone wires neatly under the helmet padding to the main unit's port.
- Connect the speaker/microphone cable to the corresponding port on the Parani M10 main unit.
4.3 ການສາກອຸປະກອນ
Before first use, fully charge the Parani M10. Connect the USB charging cable to the DC Power Charging Port on the main unit and to a USB power source. The LCD display will indicate charging status.
5. ຄໍາແນະນໍາການດໍາເນີນງານ
5.1 ເປີດ/ປິດ
- ເປີດ: ກົດປຸ່ມຫຼາຍຟັງຊັນຄ້າງໄວ້ 1 ວິນາທີ.
- ປິດພະລັງງານ: ກົດປຸ່ມ Multi-function ຄ້າງໄວ້ເປັນເວລາ 5 ວິນາທີ.
5.2 ການຄວບຄຸມປະລິມານ
Rotate the Jog Dial clockwise to increase volume and counter-clockwise to decrease volume. The LCD display will show the current volume level.
Figure 5.1: LCD display showing pairing status and volume.
5.3 Smartphone Pairing
- With the M10 powered off, press and hold the Multi-function Button for 5 seconds until the LED flashes red and blue, indicating pairing mode.
- ໃນສະມາດໂຟນຂອງທ່ານ, ໃຫ້ໄປທີ່ການຕັ້ງຄ່າ Bluetooth ແລະຊອກຫາອຸປະກອນໃໝ່.
- Select "Parani M10" from the list of available devices.
- Once paired, the LED will flash blue, and the LCD will confirm connection.
- You can now listen to music, GPS navigation, and make/receive phone calls through your headset.
5.4 Bluetooth Intercom
The Parani M10 supports intercom communication with up to four other Parani users on its dedicated Bluetooth intercom network.
- ການຈັບຄູ່ Intercom:
- Ensure both M10 units are powered on.
- On one M10 unit, press and hold the Jog Dial for 5 seconds until the LED flashes red and blue.
- On the second M10 unit, press and hold the Jog Dial for 5 seconds until the LED flashes red and blue.
- The units will automatically search and pair. Once paired, the LED will flash blue.
- Repeat this process for additional units (up to four total).
- Starting/Ending Intercom Conversation:
- To start an intercom conversation, tap the Jog Dial.
- To end an intercom conversation, tap the Jog Dial again.
5.5 ໂທລະສັບ
- ຮັບສາຍ: ແຕະທີ່ປຸ່ມຫຼາຍຟັງຊັນ.
- ສິ້ນສຸດການໂທ: ແຕະທີ່ປຸ່ມຫຼາຍຟັງຊັນ.
- ປະຕິເສດການໂທ: ກົດປຸ່ມ Multi-function ຄ້າງໄວ້ເປັນເວລາ 2 ວິນາທີ.
- ການໂທດ້ວຍສຽງ: In standby mode, press and hold the Multi-function Button for 3 seconds. (Requires smartphone support for voice commands).
6. ບໍາລຸງຮັກສາ
6.1 ການທໍາຄວາມສະອາດ
ເຊັດຫົວຫນ່ວຍຕົ້ນຕໍດ້ວຍຜ້າອ່ອນ, damp cloth. Do not use harsh chemicals or solvents. Ensure all ports are dry before charging or use.
6.2 ການດູແລຫມໍ້ໄຟ
- ສາກອຸປະກອນເປັນປະຈຳ, ເຖິງແມ່ນວ່າບໍ່ໄດ້ໃຊ້, ເພື່ອຮັກສາສຸຂະພາບຂອງແບັດເຕີຣີ.
- Avoid storing the device in extreme temperatures.
- Do not attempt to replace the internal battery yourself. Contact Sena support for battery service.
6.3 ການອັບເດດເຟີມແວ
Periodically check the Sena website for firmware updates. Updating the firmware can improve performance and add new features. Connect the device to your computer using the USB cable and follow the instructions provided by Sena's Device Manager software.
7. ການແກ້ໄຂບັນຫາ
| ບັນຫາ | ສາເຫດທີ່ເປັນໄປໄດ້ | ການແກ້ໄຂ |
|---|---|---|
| ອຸປະກອນບໍ່ເປີດ. | ແບັດເຕີຣີຕໍ່າ. | ສາກອຸປະກອນໃຫ້ເຕັມ. |
| ບໍ່ສາມາດຈັບຄູ່ກັບສະມາດໂຟນໄດ້. | Device not in pairing mode; smartphone Bluetooth off; interference. | Ensure M10 is in pairing mode (red/blue flashing LED). Turn smartphone Bluetooth off and on. Move away from other Bluetooth devices. |
| ອິນເຕີຄອມບໍ່ສາມາດເຊື່ອມຕໍ່ໄດ້. | Units not in intercom pairing mode; out of range; already connected to other devices. | Ensure both M10 units are in intercom pairing mode. Reduce distance between units. Disconnect from other Bluetooth devices before intercom pairing. |
| ບໍ່ມີສຽງຈາກລຳໂພງ. | Volume too low; speakers not connected properly; faulty speakers. | Increase volume using the Jog Dial. Check speaker connections. Test with another audio source if possible. |
| ໄມໂຄຣໂຟນບໍ່ເຮັດວຽກ. | Microphone not connected properly; faulty microphone. | Check microphone connection to the main unit. Ensure microphone is positioned correctly. |
7.1 ຣີເຊັດເປັນຄ່າໂຮງງານ
If issues persist, a factory reset may resolve them. To perform a factory reset, press and hold the Multi-function Button and the Jog Dial simultaneously for 10 seconds. The device will reset to its default settings.
8. ຂໍ້ມູນຈໍາເພາະ
| ຊື່ຕົວແບບ | ພາຣານີ M10 |
| ລຸ້ນ Bluetooth | Bluetooth 5.1 |
| ຊ່ວງ Intercom | Up to 1 km (0.6 miles) in open terrain |
| Max Intercom Users | 4 (Parani-only network) |
| ເວລາສົນທະນາ | ສູງສຸດ 16 ຊົ່ວໂມງ |
| ເວລາສາກໄຟ | ປະມານ 2.5 ຊົ່ວໂມງ |
| ອຸນຫະພູມປະຕິບັດການ | -10°C ຫາ 55°C (14°F ຫາ 131°F) |
| ນ້ຳໜັກ | ປະມານ. 60g (2.1 oz) |
Note: Specifications are subject to change without notice. Actual performance may vary based on environmental conditions and usage.
9. ການຮັບປະກັນແລະການສະຫນັບສະຫນູນ
9.1 ຂໍ້ມູນການຮັບປະກັນ
Sena products are covered by a limited warranty from the date of purchase. For detailed warranty terms and conditions, please refer to the official Sena webເວັບໄຊ ຫຼືບັດຮັບປະກັນລວມຢູ່ໃນຜະລິດຕະພັນຂອງທ່ານ. ຮັກສາຫຼັກຖານການຊື້ຂອງທ່ານສໍາລັບການຮ້ອງຂໍການຮັບປະກັນ.
9.2 ສະຫນັບສະຫນູນລູກຄ້າ
ສຳລັບການຊ່ວຍເຫຼືອດ້ານເຕັກນິກ, ການແກ້ໄຂບັນຫາ ຫຼື ການສອບຖາມທົ່ວໄປ, ກະລຸນາເຂົ້າໄປທີ່ Sena ຢ່າງເປັນທາງການ website for support resources, FAQs, and contact information. You can also reach out to your local dealer for assistance.
- ເສນາ Webເວັບໄຊ: www.sena.com
- ພາຣານີ Webເວັບໄຊ: www.parani.com
