1. ບົດແນະນຳ
Thank you for choosing the LoraTap 868 MHz Wireless Remote Control. This manual provides essential information for the proper installation, operation, and maintenance of your remote control. Please read this manual thoroughly before use to ensure optimal performance and safety. This remote control is designed for use with LoraTap 868 MHz roller shutter modules and is not compatible with Wi-Fi modules.
2. ຜະລິດຕະພັນເກີນview
2.1 ເນື້ອໃນຊຸດ
- 1 x LoraTap 868 MHz Wireless Remote Control
- 1 x CR2 Battery (pre-installed or included)
- ວົງເລັບຂະ ໜາດ 1 x
2.2 ຄຸນສົມບັດຂອງຜະລິດຕະພັນ
- ການຄວບຄຸມໄຮ້ສາຍ: Operates on the 868 MHz radio frequency band for extended range and ease of use.
- LoRaWAN Module Compatibility: Specifically designed for seamless integration and reliable remote control with LoRaWAN modules.
- ການອອກແບບ Ergonomic: Compact and easy to hold, facilitating convenient operation for opening or closing roller shutters.
- ຍີ່ຫໍ້ທີ່ເຊື່ອຖືໄດ້: LoraTap products are known for their durability and optimal performance.
2.3 ການກໍານົດອົງປະກອບ
Familiarize yourself with the components of your remote control:
ຮູບພາບ 1: LoraTap 868 MHz Wireless Remote Control and Wall Mount Bracket. The remote control is white, elongated, with three circular buttons arranged vertically. The top button has an upward-pointing triangle icon, the middle button has a pause icon (two vertical lines), and the bottom button has a downward-pointing triangle icon. A small indicator light is visible above the top button. To the right of the remote is a white wall mount bracket with two screw holes.
- ປຸ່ມ Up: Controls the roller shutter to move upwards.
- ປຸ່ມຢຸດ / ຢຸດຊົ່ວຄາວ: Stops the roller shutter movement.
- ປຸ່ມລົງ: Controls the roller shutter to move downwards.
- ຕົວຊີ້ວັດ LED: Illuminates to indicate signal transmission or pairing status.
- ວົງເລັບ Mount: Used to securely store the remote control on a wall.
3. ຕັ້ງຄ່າ
3.1 ການຕິດຕັ້ງຫມໍ້ໄຟ
The remote control uses one CR2 battery. The battery may be pre-installed. If not, or if replacement is needed:
- ຊອກຫາຝາປິດຊ່ອງໃສ່ຫມໍ້ໄຟຢູ່ດ້ານຫຼັງຂອງຣີໂໝດຄວບຄຸມ.
- Open the cover using a small screwdriver or by sliding it off.
- ໃສ່ຫມໍ້ໄຟ CR2, ຮັບປະກັນການຂົ້ວທີ່ຖືກຕ້ອງ (+/-) ຕາມທີ່ລະບຸໄວ້ພາຍໃນຊ່ອງ.
- ປິດຝາປິດຊ່ອງໃສ່ຫມໍ້ໄຟຢ່າງປອດໄພ.
3.2 Pairing with Roller Shutter Module
To control your roller shutters, the remote control must be paired with a compatible LoraTap 868 MHz roller shutter module. The exact pairing procedure may vary slightly depending on your specific module model. Always refer to the instruction manual of your LoraTap roller shutter module for detailed pairing instructions. A general pairing process typically involves:
- Put your LoraTap roller shutter module into pairing mode (often by pressing a button on the module for a few seconds).
- While the module is in pairing mode, press a specific button or combination of buttons on the remote control (e.g., the Stop button) for a few seconds.
- The LED indicator on the remote control or the module may flash to confirm successful pairing.
- Test the remote control to ensure it operates the roller shutter correctly.
4. ຄໍາແນະນໍາການດໍາເນີນງານ
4.1 ການດໍາເນີນງານພື້ນຖານ
Once paired, operating your roller shutter is straightforward:
- To Open/Raise the Shutter: ກົດ ປຸ່ມ Up (upward-pointing triangle).
- To Stop the Shutter: ກົດ Stop/Pause Button (two vertical lines) while the shutter is moving.
- To Close/Lower the Shutter: ກົດ ປຸ່ມລົງ (downward-pointing triangle).
5. ບໍາລຸງຮັກສາ
5.1 ການທໍາຄວາມສະອາດ
ເພື່ອຮັກສາຮູບລັກສະນະ ແລະ ໜ້າທີ່ການເຮັດວຽກຂອງຣີໂໝດຄວບຄຸມຂອງທ່ານ:
- ເຊັດພື້ນຜິວດ້ວຍຜ້າອ່ອນໆ, ແຫ້ງ.
- ຢ່າໃຊ້ນໍ້າຢາເຮັດຄວາມສະອາດທີ່ມີສີຂັດ, ຕົວລະລາຍ ຫຼື ສານເຄມີຮຸນແຮງ ເພາະສິ່ງເຫຼົ່ານີ້ສາມາດທໍາລາຍພາດສະຕິກໄດ້.
5.2 ການທົດແທນຫມໍ້ໄຟ
If the remote control's range decreases or the LED indicator does not light up, the battery may need replacement. Follow the steps in Section 3.1 to replace the CR2 battery. Dispose of used batteries responsibly according to local regulations.
6. ການແກ້ໄຂບັນຫາ
If you encounter issues with your LoraTap Wireless Remote Control, refer to the table below for common problems and solutions:
| ບັນຫາ | ສາເຫດທີ່ເປັນໄປໄດ້ | ການແກ້ໄຂ |
|---|---|---|
| ການຄວບຄຸມໄລຍະໄກບໍ່ຕອບສະຫນອງ. | ແບັດເຕີຣີຕໍ່າ ຫຼືຕາຍ. | Replace the CR2 battery (see Section 5.2). |
| Remote control cannot connect or pair with the module. | Module not in pairing mode; incorrect pairing procedure; remote control out of range. | Ensure the roller shutter module is in pairing mode. Follow the specific pairing instructions for your module. Move closer to the module during pairing. |
| ຂອບເຂດປະຕິບັດການຫຼຸດລົງ. | Low battery; signal interference. | Replace the battery. Ensure there are no large metal objects or other strong radio frequency devices between the remote and the module. |
| Roller shutter moves in the wrong direction. | Module motor direction setting is incorrect. | This is typically adjusted on the roller shutter module itself. Refer to your module's manual for motor direction reversal instructions. |
7. ຂໍ້ມູນຈໍາເພາະ
Key technical details for the LoraTap 868 MHz Wireless Remote Control:
| ຄຸນສົມບັດ | ລາຍລະອຽດ |
|---|---|
| ໝາຍເລກຕົວແບບ | 2778ad15-60bd-43d9-b771-b8bacd83d6bc |
| ຍີ່ຫໍ້ | LoraTap |
| ຄວາມຖີ່ຂອງການດໍາເນີນການ | 868 MHz |
| ແຫຼ່ງພະລັງງານ | ແບັດເຕີຣີ 1 x CR2 (ລວມ) |
| ການດໍາເນີນງານ Voltage | 3 ໂວນ |
| ການຈັດອັນດັບປັດຈຸບັນ | 1 ກ |
| ປະເພດສະຫຼັບ | ປຸ່ມກົດ |
| ຮູບແບບການເຮັດວຽກ | ເປີດ-ປິດ-ON |
| ວັດສະດຸ | ພາດສະຕິກ |
| ຂະໜາດສິນຄ້າ (ປະມານ) | 8.5 x 7.6 x 4.3 ຊມ (ຂະໜາດບັນຈຸ) |
| ນ້ຳໜັກ (ປະມານ) | 60 grams (Package weight) |
| ປະເທດຕົ້ນກໍາເນີດ | ຈີນ |
8. ການຮັບປະກັນແລະການສະຫນັບສະຫນູນ
For warranty information, technical support, or service inquiries, please contact LoraTap customer support through their official website or the retailer from whom you purchased the product. Please have your model number (2778ad15-60bd-43d9-b771-b8bacd83d6bc) and purchase details ready when contacting support.
