Montech AIR 1000 Premium Black ATX Mid Tower Case User Manual

1. ຜະລິດຕະພັນເກີນview

The Montech AIR 1000 Premium Black ATX Mid Tower Case is designed for optimal cooling performance and user-friendly features. This flagship model from the AIR series includes both mesh and tempered glass front panels, offering versatility in aesthetics and airflow. It comes pre-installed with three 140mm ARGB fans at the front and one 120mm ARGB exhaust fan at the rear, providing excellent thermal management and customizable lighting.

Key features include toolless quick-release front panels, an all-around anti-dust design, an easy swivel glass side panel for convenient access, and ample space for high-end GPUs and motherboards.

Figure 1: Montech AIR 1000 Premium Black ATX Mid Tower Case. This image displays the full view of the case, highlighting its mesh front panel with three illuminated ARGB fans and the tempered glass side panel revealing the interior.

2. ເນື້ອໃນຊຸດ

Please verify that all components are present in the package before proceeding with installation:

• Montech AIR 1000 Premium Black ATX Mid Tower Case (1 unit)
• Mesh Front Panel (pre-installed)
• Tempered Glass Front Panel (alternative)
• 140mm ARGB Fans (3 units, pre-installed front)
• 120mm ARGB Fan (1 unit, pre-installed rear)
• ກ່ອງອຸປະກອນເສີມ (ມີສະກູ, ສາຍຮັດ, ແລະ ຊິ້ນສ່ວນຂະໜາດນ້ອຍອື່ນໆ)
• ຄູ່ມືຜູ້ໃຊ້ (ເອກະສານນີ້)

3. ຄູ່ມືການຕິດຕັ້ງ

Follow these steps to set up your Montech AIR 1000 Premium Black ATX Mid Tower Case and install your PC components.

3.1. ການກະກຽມ

• Unpack the case carefully and place it on a stable, flat surface.
• Remove the tempered glass side panel by swiveling it open and lifting it off its hinges.
• Identify the accessory box and familiarize yourself with the included screws and components.

3.2. ການຕິດຕັ້ງເມນບອດ

1. ຕິດຕັ້ງແຜ່ນປ້ອງກັນ I/O ເຂົ້າໄປໃນຊ່ອງຕັດຂອງເມນບອດທີ່ຢູ່ດ້ານຫຼັງຂອງເຄສ.
2. Align your ATX, Micro-ATX, or Mini-ITX motherboard with the standoffs inside the case. Ensure the standoffs match your motherboard's form factor.
3. ຍຶດແຜງວົງຈອນຫຼັກໃຫ້ແໜ້ນໂດຍໃຊ້ສະກູທີ່ເໝາະສົມຈາກກ່ອງອຸປະກອນເສີມ.

3.3. ການຕິດຕັ້ງຫນ່ວຍບໍລິການສະຫນອງພະລັງງານ (PSU).

1. Locate the PSU mounting bracket at the rear bottom of the case.
2. Attach the PSU to the bracket using the provided screws.
3. Slide the PSU with the bracket into the PSU shroud from the rear of the case and secure it.

3.4. ການຕິດຕັ້ງໄດຣຟ໌ເກັບຂໍ້ມູນ

• 2.5" SSDs: Mount SSDs onto the dedicated 2.5" drive trays located behind the motherboard tray or within the PSU shroud.
• ຮາດດິດ 3.5": Install HDDs into the drive cage located within the PSU shroud.

3.5. ການຕິດຕັ້ງບັດກາຟິກ (GPU).

1. ເອົາຊ່ອງສຽບ PCIe ທີ່ຈໍາເປັນອອກຈາກດ້ານຫລັງຂອງກໍລະນີ.
2. Insert your graphics card into the primary PCIe slot on your motherboard.
3. ຮັບປະກັນບັດກາຟິກດ້ວຍສະກູ.

3.6. Cable Management and Front Panel Connections

• Route all power cables from the PSU to their respective components.
• Connect the front panel I/O cables (USB, audio, power switch, reset switch, LED indicators) to the appropriate headers on your motherboard. Refer to your motherboard manual for exact pinouts.
• ໃຊ້ຈຸດຕັດສາຍໄຟ ແລະ ຈຸດມັດສາຍໄຟຢູ່ທາງຫຼັງຖາດເມນບອດເພື່ອຈັດການສາຍໄຟໃຫ້ສະອາດ.
• Connect the pre-installed ARGB fans to your motherboard's ARGB header or a dedicated ARGB controller (if included or purchased separately).

4. ຄໍາແນະນໍາການດໍາເນີນງານ

Once all components are installed and cables are connected, you can begin operating your system.

4.1. ເປີດເຄື່ອງ

• ໃຫ້ແນ່ໃຈວ່າສະຫຼັບການສະຫນອງພະລັງງານຢູ່ໃນຕໍາແຫນ່ງ "ON".
• ກົດປຸ່ມເປີດປິດທີ່ຕັ້ງຢູ່ດ້ານເທິງຂອງແຜງ I/O ຂອງເຄສ.

4.2. ການຄວບຄຸມໄຟ ARGB

The pre-installed ARGB fans can be controlled via your motherboard's ARGB software (e.g., ASUS Aura Sync, MSI Mystic Light Sync, Gigabyte RGB Fusion, ASRock Polychrome Sync) if connected to a compatible 3-pin 5V ARGB header. Alternatively, some cases may include a built-in controller or a button on the I/O panel to cycle through lighting modes. Refer to your motherboard manual or case documentation for specific ARGB control methods.

4.3. Front Panel Usage

The top I/O panel provides convenient access to:

• USB 3.0 Ports (for high-speed data transfer)
• USB 2.0 Ports (for peripherals)
• Audio Jacks (headphone and microphone)
• ປຸ່ມເປີດປິດ
• Reset Button (if applicable)

5. ບໍາລຸງຮັກສາ

ການບໍາລຸງຮັກສາເປັນປົກກະຕິຈະຊ່ວຍຮັບປະກັນການປະຕິບັດທີ່ດີທີ່ສຸດແລະອາຍຸຍືນຂອງອົງປະກອບ PC ຂອງທ່ານ.

5.1. ການເຮັດຄວາມສະອາດການກັ່ນຕອງຂີ້ຝຸ່ນ

The Montech AIR 1000 Premium features an all-around anti-dust design with removable dust filters. It includes an innovative quick-slide dust filter. It is recommended to clean these filters every 1-3 months, depending on your environment.

• Gently slide out the dust filters (top, front, bottom).
• Use a soft brush or vacuum cleaner to remove accumulated dust.
• Rinse with water if heavily soiled, ensuring they are completely dry before re-installing.

5.2. ທໍາຄວາມສະອາດທົ່ວໄປ

• ໃຊ້ອ່ອນ, ງamp cloth to wipe down the exterior surfaces of the case. Avoid abrasive cleaners.
• ສຳລັບແຜງກະຈົກທີ່ມີຄວາມແຂງກະດ້າງ, ໃຫ້ໃຊ້ນໍ້າຢາເຊັດກະຈົກ ແລະ ຜ້າໄມໂຄຣໄຟເບີເພື່ອປ້ອງກັນຮອຍດ່າງ.

5.3. Fan Cleaning

Periodically inspect the fan blades for dust buildup. Use compressed air to blow dust out of the fan blades and heatsinks. Hold the fan blades in place while using compressed air to prevent over-spinning and potential damage.

6. ການແກ້ໄຂບັນຫາ

ພາກສ່ວນນີ້ແກ້ໄຂບັນຫາທົ່ວໄປທີ່ທ່ານອາດຈະພົບ.

6.1. ລະບົບບໍ່ເປີດເຄື່ອງ

• Ensure the power cable is securely connected to the PSU and the wall outlet.
• Verify the PSU switch is in the "ON" position.
• Check all internal power connections, especially the 24-pin ATX and 8-pin CPU power cables to the motherboard.
• Confirm the front panel power switch cable is correctly connected to the motherboard's F_PANEL header.

6.2. Fans Not Spinning or ARGB Not Lighting Up

• Check if the fan power cables are securely connected to the motherboard fan headers or a fan controller.
• Verify that the ARGB cables are correctly connected to a 3-pin 5V ARGB header on the motherboard or an ARGB controller. Ensure it's not connected to a 4-pin 12V RGB header, as this can damage the LEDs.
• Ensure the ARGB software on your operating system is installed and configured correctly.

6.3. USB Ports or Audio Jacks Not Functioning

• Confirm that the USB 3.0, USB 2.0, and HD Audio cables from the front panel are securely connected to the corresponding headers on your motherboard.
• Check your motherboard's BIOS/UEFI settings to ensure USB and audio controllers are enabled.

7. ຂໍ້ມູນຈໍາເພາະ

8. ການຮັບປະກັນແລະການສະຫນັບສະຫນູນ

ສຳລັບຂໍ້ມູນການຮັບປະກັນ ແລະ ການຊ່ວຍເຫຼືອດ້ານເຕັກນິກ, ກະລຸນາອ້າງອີງເຖິງ Montech ຢ່າງເປັນທາງການ webເວັບໄຊ ຫຼືຕິດຕໍ່ຮ້ານຂາຍຍ່ອຍໃນທ້ອງຖິ່ນຂອງທ່ານ. ຮັກສາຫຼັກຖານການຊື້ຂອງທ່ານສໍາລັບການຮ້ອງຂໍການຮັບປະກັນ.

ສໍາລັບການຊ່ວຍເຫຼືອເພີ່ມເຕີມ, ທ່ານສາມາດໄປຢ້ຽມຢາມໄດ້ ເຈົ້າໜ້າທີ່ Montech Webເວັບໄຊ.