1. ບົດແນະນຳ
This manual provides detailed instructions for the installation, operation, and maintenance of your Edge Audio Xtreme Series EDX5000.1FD-E0 Monoblock Amplifier. The EDX5000.1FD-E0 is a high-performance Class D full-bridge amplifier designed for powerful audio output. Please read this manual thoroughly before attempting installation or operation to ensure proper use and to prevent damage.
1.1 ຂໍ້ຄວນລະວັງຄວາມປອດໄພ
- Always disconnect the vehicle's battery negative terminal before making any electrical connections.
- ຮັບປະກັນວ່າສາຍໄຟທັງໝົດໄດ້ຖືກວາງ ແລະ ຮັດແໜ້ນຢ່າງຖືກຕ້ອງເພື່ອປ້ອງກັນຄວາມເສຍຫາຍ ຫຼື ວົງຈອນສັ້ນ.
- ໃຊ້ສາຍວັດແທກທີ່ເໝາະສົມສຳລັບການເຊື່ອມຕໍ່ສາຍໄຟ ແລະດິນຕາມທີ່ລະບຸໄວ້ໃນຄູ່ມືນີ້.
- ຫຼີກເວັ້ນການຕິດຕັ້ງ amplifier in locations exposed to moisture or excessive heat.
- ປຶກສາຜູ້ຕິດຕັ້ງມືອາຊີບ ຖ້າທ່ານບໍ່ແນ່ໃຈກ່ຽວກັບພາກສ່ວນໃດນຶ່ງຂອງຂະບວນການຕິດຕັ້ງ.
2. ເນື້ອໃນຊຸດ
ກວດສອບວ່າທຸກລາຍການມີຢູ່ໃນຊຸດກ່ອນທີ່ຈະດໍາເນີນການຕິດຕັ້ງ.
- Edge Audio EDX5000.1FD-E0 Monoblock Ampມີຊີວິດຊີວາ
- Remote Bass Control Unit
- Wiring for Remote Bass Control
Image 2.1: Contents of the EDX5000.1FD-E0 package, including the amplifier, remote bass control, and connecting cable.
Image 2.2: The retail packaging for the Edge Audio EDX5000.1FD-E0 Monoblock Ampມີຊີວິດຊີວາ.
3. ຄຸນສົມບັດ
The Edge Audio Xtreme Series EDX5000.1FD-E0 amplifier incorporates advanced features for optimal audio performance:
- Monoblock power amplifier design for dedicated subwoofer applications.
- Max Power: 10,000 watts.
- Built-in active crossovers (High-Pass Filter and Low-Pass Filter) for precise sound shaping.
- Adjustable Bass Boost circuit for enhanced low-frequency response.
- Ultra-efficient Class D topology for high power output with minimal heat generation.
- Wideband frequency response up to 20kHz.
- Full bridge technology for efficient power delivery.
- Compact footprint for versatile installation options.
- Dimensions (H x W x D): 2.5 x 10.4 x 9.1 inches (64 x 264 x 230mm).
ຮູບພາບ 3.1: ທາງເທິງ view of the EDX5000.1FD-E0 amplifier, showcasing its compact design and heatsink fins.
4. ການຕິດຕັ້ງແລະການຕິດຕັ້ງ
ການຕິດຕັ້ງທີ່ເຫມາະສົມແມ່ນສໍາຄັນສໍາລັບການປະຕິບັດແລະອາຍຸຍືນຂອງເຈົ້າ ampຕົວຊີ້ບອກ. ປະຕິບັດຕາມຄໍາແນະນໍາເຫຼົ່ານີ້ຢ່າງລະມັດລະວັງ.
4.1 ສະຖານທີ່ຕັ້ງ
ພູ amplifier in a dry, well-ventilated area, away from direct sunlight or heat sources. Ensure sufficient airflow around the amplifier's heatsink. The amplifier is designed for surface mounting.
4.2 ການເຊື່ອມຕໍ່ສາຍໄຟ
All wiring should be securely connected and insulated to prevent short circuits. Use high-quality, appropriate gauge wiring.
4.2.1 ການເຊື່ອມຕໍ່ພະລັງງານ
ເຊື່ອມຕໍ່ amplifier to the vehicle's electrical system as follows:
- +12V (ພະລັງງານ): Connect a heavy-gauge power cable (e.g., 4 AWG or larger for 10,000W max power) directly from the positive terminal of the vehicle's battery to the +12V terminal on the amplifier. Install an appropriate fuse (not supplied) within 18 inches of the battery.
- GND (ດິນ): ເຊື່ອມຕໍ່ສາຍດິນຂະໜາດໃຫຍ່ທີ່ມີຂະໜາດດຽວກັນກັບສາຍໄຟຈາກຂົ້ວຕໍ່ GND ທີ່ຢູ່ເທິງ ampຕິດຕັ້ງອຸປະກອນໃສ່ພື້ນຜິວໂລຫະທີ່ສະອາດ ແລະ ບໍ່ໄດ້ທາສີຂອງຕົວຖັງລົດ. ໃຫ້ແນ່ໃຈວ່າມີການເຊື່ອມຕໍ່ໄຟຟ້າທີ່ແຂງແຮງ.
- REM (ການເປີດທາງໄກ): Connect a smaller gauge wire (e.g., 18 AWG) from the REM terminal on the amplifier to the remote turn-on output of your head unit. This wire turns the ampເປີດ ແລະ ປິດເຄື່ອງສຽງດ້ວຍລະບົບສຽງຂອງທ່ານ.
Image 4.1: Power input terminals (+12V, REM, GND) on the EDX5000.1FD-E0 ampມີຊີວິດຊີວາ.
4.2.2 ການເຊື່ອມຕໍ່ການປ້ອນຂໍ້ມູນສຽງ
Connect your head unit's RCA outputs to the 'LOW INPUT' RCA jacks on the ampມີຊີວິດຊີວາ.
4.2.3 ການເຊື່ອມຕໍ່ຜົນຜະລິດລຳໂພງ
ເຊື່ອມຕໍ່ຊັບວູບເຟີຂອງທ່ານເຂົ້າກັບຂົ້ວຕໍ່ອອກລຳໂພງເທິງ amplifier. Ensure correct polarity (+ to + and - to -) for optimal performance. Refer to your subwoofer's specifications for impedance matching.
Image 4.2: Rear panel of the EDX5000.1FD-E0 amplifier, showing low-level inputs, crossover controls, gain, bass boost, and speaker output terminals.
5. ຄໍາແນະນໍາການດໍາເນີນງານ
ເມື່ອຕິດຕັ້ງ, ປັບ amplifier settings for optimal sound quality.
5.1 ກະດານຄວບຄຸມຫຼາຍກວ່າview
Refer to Image 4.2 for the location of the following controls:
- HPF (High-Pass Filter): Adjusts the high-pass crossover frequency. For subwoofer applications, this should typically be set to its minimum or off, as a low-pass filter is usually preferred.
- LPF (ຕົວກອງຕໍ່າຜ່ານ): Adjusts the low-pass crossover frequency (15Hz - 200Hz). This filters out frequencies above the set point, sending only low frequencies to the subwoofer. Set this according to your subwoofer and system requirements, typically between 60Hz and 100Hz.
- ໄດ້ຮັບ: ກົງກັບ ampຄວາມອ່ອນໄຫວຕໍ່ອິນພຸດຂອງເຄື່ອງຂະຫຍາຍສຽງຕໍ່ກັບລະດັບຜົນຜະລິດຂອງຫົວໜ່ວຍຂອງທ່ານ. ເລີ່ມຕົ້ນດ້ວຍການເພີ່ມສຽງໃຫ້ຕໍ່າສຸດ, ຈາກນັ້ນຄ່ອຍໆເພີ່ມມັນຈົນກວ່າທ່ານຈະໄດ້ຍິນສຽງບິດເບືອນ, ຈາກນັ້ນຫຼຸດສຽງລົງເລັກນ້ອຍ. ຢ່າໃຊ້ຕົວຄວບຄຸມການເພີ່ມສຽງເປັນປຸ່ມປັບລະດັບສຽງ.
- bass boost: Adjusts the level of bass enhancement (0dB - 12dB). Use sparingly to avoid distortion.
- FREQ (Bass Boost Frequency): Selects the center frequency for the bass boost (35Hz - 70Hz).
- ໝາຍ ເຫດ: Port for connecting the wired remote bass control unit.
5.2 ການຄວບຄຸມເບດຈາກໄລຍະໄກ
The included remote bass control allows for convenient adjustment of the subwoofer output level from the driver's seat. Connect it to the 'REMOTE' port on the ampມີຊີວິດຊີວາ.
6. ບໍາລຸງຮັກສາ
ການບໍາລຸງຮັກສາເປັນປົກກະຕິຈະຊ່ວຍຮັບປະກັນອາຍຸຍືນແລະການປະຕິບັດຂອງທ່ານ ampມີຊີວິດຊີວາ.
- ທໍາຄວາມສະອາດ: ທໍາຄວາມສະອາດແຕ່ລະໄລຍະ ampເຊັດພາຍນອກຂອງເຄື່ອງດູດອາກາດດ້ວຍຜ້າອ່ອນໆແລະແຫ້ງ. ຢ່າໃຊ້ສານເຄມີທີ່ຮຸນແຮງ ຫຼື ນໍ້າຢາເຮັດຄວາມສະອາດທີ່ມີສີຂັດ. ຮັບປະກັນວ່າຄີບລະບາຍອາກາດບໍ່ມີຝຸ່ນ ແລະ ສິ່ງເສດເຫຼືອ.
- ກວດສອບການເຊື່ອມຕໍ່: Annually inspect all power, ground, remote, and speaker connections for tightness and corrosion. Loose connections can cause performance issues or damage.
- ສະພາບແວດລ້ອມ: ຮັບປະກັນ ampເຄື່ອງເກັບມ້ຽນຍັງຄົງຢູ່ໃນສະພາບແວດລ້ອມທີ່ແຫ້ງ ແລະ ໝັ້ນຄົງ, ປ້ອງກັນຈາກອຸນຫະພູມທີ່ຮຸນແຮງ.
7. ການແກ້ໄຂບັນຫາ
ຖ້າເຈົ້າປະສົບບັນຫາກັບເຈົ້າ ampສຳລັບຂໍ້ມູນເພີ່ມເຕີມ, ໃຫ້ອ້າງອີງເຖິງບັນຫາ ແລະ ວິທີແກ້ໄຂທົ່ວໄປຕໍ່ໄປນີ້ກ່ອນທີ່ຈະຕິດຕໍ່ຝ່າຍຊ່ວຍເຫຼືອ.
- ບໍ່ມີພະລັງງານ:
- ກວດສອບຟິວໃນສາຍໃກ້ກັບແບັດເຕີຣີ.
- Verify +12V, GND, and REM connections are secure and receiving power.
- Ensure the remote turn-on wire is connected to a switched 12V source.
- ບໍ່ມີສຽງ:
- Check all RCA input and speaker output connections.
- Verify head unit is powered on and outputting audio.
- Adjust the GAIN control.
- ສຽງບິດເບືອນ:
- Reduce the GAIN setting.
- ກວດສອບສາຍໄຟລຳໂພງວ່າມີວົງຈອນໄຟຟ້າລັດວົງຈອນ ຫຼື ຂົ້ວທີ່ບໍ່ຖືກຕ້ອງຫຼືບໍ່.
- ໃຫ້ແນ່ໃຈວ່າຄວາມຕ້ານທານຂອງລຳໂພງກົງກັນ ampຂໍ້ມູນຈໍາເພາະຂອງ lifier.
- Reduce BASS BOOST if active.
- Ampຄວາມຮ້ອນເກີນຂອງເຄື່ອງສົ່ງ:
- ຮັບປະກັນການລະບາຍອາກາດທີ່ພຽງພໍອ້ອມຮອບ ampມີຊີວິດຊີວາ.
- ກວດສອບຄວາມຕ້ານທານຂອງລຳໂພງ; ການໃຊ້ຄວາມຕ້ານທານຕໍ່າເກີນໄປອາດເຮັດໃຫ້ຮ້ອນເກີນໄປໄດ້.
- Verify power and ground wire gauge is sufficient.
8. ຂໍ້ມູນຈໍາເພາະ
Technical specifications for the Edge Audio Xtreme Series EDX5000.1FD-E0 Monoblock Ampມີຊີວິດຊີວາ:
| ຄຸນສົມບັດ | ຂໍ້ມູນຈໍາເພາະ |
|---|---|
| ໝາຍເລກຕົວແບບ | EDX5000.1FD-E0 |
| ຍີ່ຫໍ້ | ແຂບ |
| Ampປະເພດທີ່ມີຊີວິດຊີວາ | Monoblock, Class D, Full Bridge |
| ພະລັງງານສູງສຸດ | 10,000 ວັດ |
| ການຕອບສະໜອງຄວາມຖີ່ | ເຖິງ 20kHz |
| Built-in Crossovers | Active (HPF, LPF) |
| ເພີ່ມສຽງເບສ | Adjustable (0-12dB) |
| ຄວາມຖີ່ຂອງການເພີ່ມສຽງເບດ | Adjustable (35Hz-70Hz) |
| ສະບັບtage | 230 Volts (Operating Voltage Range typically 12-14.4V DC for car audio) |
| ປະເພດການຕິດຕັ້ງ | Surface Mount |
| ຂະໜາດສິນຄ້າ (H x W x D) | 2.5 x 10.4 x 9.1 ນິ້ວ (64 x 264 x 230 ມມ) |
| ນ້ຳໜັກສິນຄ້າ | 6.61 ປອນ |
9. ການຮັບປະກັນແລະການສະຫນັບສະຫນູນ
For warranty information or technical support, please refer to the documentation provided at the time of purchase or contact your authorized Edge Audio dealer. Keep your proof of purchase for warranty claims.
