ແນະນຳ
This manual provides detailed instructions for the installation, operation, and maintenance of your AXAGON ADSA-ST USB 3.0 Docking Station. This device is designed to connect 2.5" and 3.5" SATA SSDs and HDDs to your computer via a USB 3.0 interface, offering fast data transfer speeds.
ກະລຸນາອ່ານຄູ່ມືນີ້ຢ່າງລະອຽດກ່ອນທີ່ຈະນໍາໃຊ້ຜະລິດຕະພັນເພື່ອຮັບປະກັນການເຮັດວຽກທີ່ເຫມາະສົມແລະປ້ອງກັນຄວາມເສຍຫາຍ.
ເນື້ອໃນຊຸດ
ກວດສອບວ່າອົງປະກອບທັງໝົດມີຢູ່ໃນຊຸດ:
- AXAGON ADSA-ST Docking Station
- USB 3.0 Type-A to Micro-B cable
- Power Adapter
- ຄູ່ມືຜູ້ໃຊ້ (ເອກະສານນີ້)
Image: The AXAGON ADSA-ST Docking Station shown alongside its retail packaging, illustrating the product and its box.
ຄຸນນະສົມບັດທີ່ສໍາຄັນ
- Supports 2.5" and 3.5" SATA I/II/III SSDs and HDDs.
- USB 3.0 (USB 3.2 Gen 1) interface with up to 5 Gbps transfer speed.
- SATA 6G (SATA III) support.
- UASP (USB Attached SCSI Protocol) support for enhanced performance.
- TRIM support for SSDs.
- HDD Auto Spindown function.
- LED indication for power and activity.
- Compact design with aluminum body.
ຮູບພາບ: ກ view of the AXAGON ADSA-ST Docking Station highlighting its 5 Gbps USB 3.2 Gen 1 speed and compact size.
Image: The docking station from the front, indicating features like SMART HDD info, automatic HDD spindown, and USB-A connectivity.
Image: The underside of the docking station, showing internal components and highlighting SATA 6G, UASP, and TRIM support.
ຄໍາແນະນໍາການຕິດຕັ້ງ
- ເຊື່ອມຕໍ່ອະແດບເຕີໄຟຟ້າ: Plug the included power adapter into the DC IN port on the back of the docking station and then into a power outlet.
- ເຊື່ອມຕໍ່ກັບຄອມພິວເຕີ: Connect the USB 3.0 cable from the docking station's Micro-B port to an available USB 3.0 (or higher) port on your computer.
- ໃສ່ HDD/SSD:
- For 2.5" SSD/HDD: Gently slide the 2.5" drive into the slot until it connects firmly with the SATA connector.
- For 3.5" HDD: Gently slide the 3.5" drive into the slot until it connects firmly with the SATA connector.
Ensure the drive is inserted correctly with the SATA connector facing the correct direction. Do not force the drive.
Image: A 2.5-inch SSD being inserted into the docking station, demonstrating compatibility with smaller drives.
Image: A 3.5-inch HDD being inserted into the docking station, demonstrating compatibility with larger drives.
- ເປີດ: Press the power button located on the back of the docking station. The LED indicator on the front will illuminate.
Image: The rear panel of the docking station, showing the power button, USB Micro-B port, and power input for connection.
ຄໍາແນະນໍາການດໍາເນີນງານ
Drive Recognition
Once powered on and connected, your operating system should automatically detect the inserted drive. If it's a new drive, you may need to initialize and format it through Disk Management (Windows) or Disk Utility (macOS) before it appears in File Explorer/Finder.
ຕົວຊີ້ວັດ LED
The LED indicator on the front of the docking station provides status information:
- ສີຟ້າແຂງ: Power on, drive idle.
- ກະພິບສີຟ້າ: Drive activity (reading or writing data).
ຮູບພາບ: A close-up view of the docking station's front panel, highlighting the LED indicator light.
Removing a Drive
Before removing a drive, always safely eject it from your operating system to prevent data corruption. After ejection, gently pull the drive straight out of the docking station slot.
HDD Auto Spindown
The docking station supports automatic spindown of the HDD when it is idle for a certain period, conserving power and extending drive lifespan. This feature is managed by the operating system or the drive itself.
ບໍາລຸງຮັກສາ
- ຮັກສາບ່ອນຈອດລົດໃຫ້ສະອາດ ແລະບໍ່ມີຂີ້ຝຸ່ນ. ໃຊ້ຜ້າອ່ອນໆ, ແຫ້ງເພື່ອທໍາຄວາມສະອາດ.
- ຫຼີກເວັ້ນການເປີດເຜີຍອຸປະກອນກັບອຸນຫະພູມທີ່ຮຸນແຮງ, ຄວາມຊຸ່ມຊື່ນ, ຫຼືແສງແດດໂດຍກົງ.
- ຢ່າພະຍາຍາມຖອດປະກອບ ຫຼືສ້ອມແປງອຸປະກອນດ້ວຍຕົນເອງ. ອ້າງອີງເຖິງພະນັກງານບໍລິການທີ່ມີຄຸນວຸດທິ.
- ຮັບປະກັນການລະບາຍອາກາດທີ່ເໝາະສົມອ້ອມຮອບສະຖານີຈອດໃນລະຫວ່າງການປະຕິບັດງານ.
ການແກ້ໄຂບັນຫາ
- ບໍ່ກວດພົບ Drive:
- ໃຫ້ແນ່ໃຈວ່າອະແດບເຕີໄຟຟ້າໄດ້ເຊື່ອມຕໍ່ຢ່າງປອດໄພ ແລະ ສະຖານີເຊື່ອມຕໍ່ເປີດຢູ່.
- Verify the USB cable is properly connected to both the docking station and the computer.
- ລອງໃຊ້ພອດ USB ອື່ນໃນຄອມພິວເຕີຂອງທ່ານ.
- Ensure the HDD/SSD is fully seated in the docking station's slot.
- Check Disk Management (Windows) or Disk Utility (macOS) to see if the drive is recognized but uninitialized/unformatted.
- Test with a different HDD/SSD to rule out a drive issue.
- ຄວາມໄວການໂອນຊ້າ:
- Ensure the docking station is connected to a USB 3.0 (or higher) port on your computer. USB 2.0 ports will limit speeds.
- ກວດສອບລະບົບປະຕິບັດການແລະຄົນຂັບຂອງທ່ານແມ່ນທັນສະໄຫມ.
- The actual speed depends on the drive's performance and your computer's USB controller.
- Drive disconnects randomly:
- ກວດເບິ່ງການເຊື່ອມຕໍ່ສາຍເຄເບີ້ນທັງຫມົດ.
- ໃຫ້ແນ່ໃຈວ່າອະແດບເຕີກໍາລັງສະຫນອງພະລັງງານທີ່ຫມັ້ນຄົງ.
- Disable USB power saving features in your computer's operating system settings.
ຂໍ້ມູນຈໍາເພາະ
| ຄຸນສົມບັດ | ລາຍລະອຽດ |
|---|---|
| ຍີ່ຫໍ້ | AXAGON |
| ໝາຍເລກຕົວແບບ | ADSA-SN |
| ເວທີຮາດແວ | PC |
| ອຸປະກອນທີ່ເຂົ້າກັນໄດ້ | ແລັບທັອບ, ຄອມພິວເຕີຕັ້ງໂຕະ |
| ຄວາມເຂົ້າກັນໄດ້ຂອງ Drive | 2.5" / 3.5" SATA I/II/III SSD/HDD |
| ການໂຕ້ຕອບ | USB 3.0 (USB 3.2 Gen 1) |
| ອັດຕາການໂອນຂໍ້ມູນ | Up to 5 Gbps (USB 3.0), 6 Gbps (SATA III) |
| ພອດ USB ທັງໝົດ | 1 (Micro-B) |
| ຈຳນວນ Drive Bays | 1 |
| ສີ | ດຳ |
| ນ້ໍາຫນັກລາຍການ | 2.2 ປອນ (ປະມານ 1 ກິໂລ) |
| ຂະໜາດແພັກເກັດ | 3.94 x 0.79 x 0.39 ນິ້ວ (ປະມານ 10 x 2 x 1 ຊມ) |
| ວັນທີທໍາອິດທີ່ມີ | ວັນທີ 30 ມີນາ 2021 |
ການຮັບປະກັນແລະການສະຫນັບສະຫນູນ
For warranty information and technical support, please refer to the official AXAGON webສະຖານທີ່ຫຼືຕິດຕໍ່ຜູ້ຈັດຈໍາຫນ່າຍທ້ອງຖິ່ນຂອງທ່ານ. ຮັກສາຫຼັກຖານການຊື້ຂອງທ່ານສໍາລັບການຮ້ອງຂໍການຮັບປະກັນ.
