ELEGRP 15 Amp USB Wall Outlet with Type A & Type C Ports Instruction Manual

1. ບົດແນະນຳ

This manual provides essential instructions for the safe installation, operation, and maintenance of your ELEGRP 15 Amp USB Wall Outlet. Please read this manual thoroughly before installation and retain it for future reference.

The ELEGRP USB Wall Outlet is designed to provide both standard AC power receptacles and convenient USB charging ports (Type A and Type C) in a single unit. It features tamper-resistant shutters for safety and a dedicated charging port controller for optimized device charging.

2. ຂໍ້ມູນຄວາມປອດໄພ

ຄຳເຕືອນ: ມີຄວາມສ່ຽງຕໍ່ໄຟຟ້າຊັອດ ຫຼື ໄຟໄໝ້. ການຕິດຕັ້ງທີ່ບໍ່ຖືກຕ້ອງອາດເຮັດໃຫ້ເກີດການບາດເຈັບສາຫັດ ຫຼື ເສຍຊີວິດໄດ້.

• ການຕິດຕັ້ງຕ້ອງໄດ້ປະຕິບັດໂດຍຊ່າງໄຟຟ້າທີ່ມີຄຸນວຸດທິ ຫຼື ບຸກຄົນທີ່ມີຄວາມຮູ້ ໂດຍສອດຄ່ອງກັບລະຫັດໄຟຟ້າແຫ່ງຊາດ ແລະ ທ້ອງຖິ່ນທັງໝົດ.
• Turn off power at the circuit breaker or fuse box before installing or servicing the outlet.
• ໃຊ້ພຽງແຕ່ສາຍທອງແດງ. ຢ່າໃຊ້ກັບສາຍອາລູມິນຽມ.
• ໃຫ້ແນ່ໃຈວ່າການເຊື່ອມຕໍ່ສາຍໄຟທັງຫມົດແມ່ນປອດໄພ.
• Do not exceed the electrical ratings of the device.
• ອຸປະກອນນີ້ໃຊ້ໃນອາຄານເທົ່ານັ້ນ.

3. ເນື້ອໃນຊຸດ

• ELEGRP 15 Amp USB Wall Outlet (Quantity as purchased)
• Matching Wall Plate
• screws ການຕິດຕັ້ງ
• ຄູ່ມືການສອນ

Image: Multiple ELEGRP 15 Amp USB Wall Outlets, showing the product as packaged.

4. ຂໍ້ມູນຈໍາເພາະ

Image: Diagram showing the physical dimensions and a summary of product specifications.

5. ການຕິດຕັ້ງ (Setup)

1. ປິດໄຟ: Locate the circuit breaker or fuse box controlling the outlet you intend to replace. Turn off the power to that circuit. Verify power is off using a voltage ເຄື່ອງທົດສອບ.
2. ເອົາ​ອອກ Outlet ເກົ່າ​: Unscrew and carefully remove the existing wall plate and outlet from the electrical box. Disconnect the wires from the old outlet, noting which wire connects to which terminal (hot, neutral, ground).
3. ກະກຽມສາຍໄຟ: If necessary, strip approximately 1/2 inch (12.7 mm) of insulation from the ends of the wires. Ensure wires are straight and free of nicks.
4. ເຊື່ອມຕໍ່ສາຍ: The ELEGRP USB Wall Outlet supports both side wiring and back wiring.
   • ສະກູສີຂຽວ: Connect the bare copper or green insulated ground wire to the green screw terminal.
   • Silver Screw: Connect the white (neutral) wire to the silver screw terminal.
   • Brass Screw: Connect the black (hot) wire to the brass screw terminal.

   Note: All screws are pre-loosened for easier installation.
5. ຕິດຕັ້ງຮ້ານອອກໃໝ່: Carefully fold the wires into the electrical box. Insert the new ELEGRP USB Wall Outlet into the box and secure it with the provided mounting screws.
6. ຕິດຕັ້ງແຜ່ນຕິດຝາ: Attach the new wall plate over the installed outlet.
7. ຟື້ນຟູພະລັງງານ: ເປີດໄຟຄືນຢູ່ທີ່ຕົວຕັດວົງຈອນ ຫຼືກ່ອງຟິວ.
8. ຊ່ອງສຽບການທົດສອບ: Test both the AC receptacles and the USB ports to ensure proper functionality.

Image: Detailed wiring diagrams for both side and back wire connections.

6. ຄໍາແນະນໍາການດໍາເນີນງານ

6.1 AC Receptacles

• Insert standard two-prong or three-prong plugs into the AC outlets.
• ທamper-resistant shutters prevent foreign objects from being inserted into the slots, enhancing safety, especially for children.

6.2 ພອດສາກໄຟ USB

• Connect your USB-powered devices (e.g., smartphones, tablets, e-readers) to the Type A or Type C USB ports using appropriate charging cables.
• The integrated USB Dedicated Charging Port Controller automatically identifies your device's power requirements and delivers optimal charging current for stable and fast charging.
• The total output for both USB ports is 4.2 Amps at 5V DC. When used individually, the Type C port can provide up to 3.0 Amps, and the Type A port up to 2.4 Amps.

Image: A smartphone connected to the USB Type C port of the outlet, illustrating charging speed.

Image: A visual representation of various devices compatible with the USB charging ports.

7. ບໍາລຸງຮັກສາ

• ທໍາຄວາມສະອາດ: Ensure power is off before cleaning. Wipe the surface of the outlet and wall plate with a soft, damp ຜ້າ. ຢ່າໃຊ້ເຄື່ອງເຮັດຄວາມສະອາດຂັດຫຼືສານລະລາຍ.
• ການກວດກາ: Periodically inspect the outlet for any signs of damage, such as cracks, discoloration, or loose connections. If damage is observed, turn off power and have the outlet inspected and replaced by a qualified electrician.
• ການຄຸ້ມຄອງຄວາມຮ້ອນ: The outlet is designed with advanced heat management to ensure cooler and safer operation. Avoid covering the outlet or obstructing airflow around it.

Image: A comparison illustrating the superior heat management of the ELEGRP outlet compared to other models.

8. ການແກ້ໄຂບັນຫາ

• No Power to Outlet/USB Ports:
  • Check the circuit breaker or fuse box to ensure the power is on.
  • Verify that the wiring connections are secure and correct (refer to Section 5).
  • Ensure the device is properly plugged into the AC receptacle or USB port.
• ການສາກ USB ຊ້າ:
  • Ensure your device and cable are compatible with fast charging.
  • If multiple devices are charging simultaneously, the total current is shared, which may reduce individual charging speeds.
  • Verify the USB cable is not damaged.
• ພອດ USB ບໍ່ຮອງຮັບອຸປະກອນ:
  • ລອງໃຊ້ສາຍ USB ອື່ນ.
  • ທົດສອບດ້ວຍອຸປະກອນອື່ນເພື່ອແຍກບັນຫາ.

9. ການຮັບປະກັນແລະການສະຫນັບສະຫນູນ

ELEGRP products are manufactured to high-quality standards. For warranty information or technical support, please refer to the warranty card included with your purchase or contact ELEGRP customer service directly.

ຂໍ້ມູນຕິດຕໍ່: Please visit the official ELEGRP website or refer to your product packaging for the most current contact details.