Empress Effects CPBB

Empress Effects Bass Compressor Pedal

Model: CPBB User Manual

ຜົນກະທົບ Empress

1. ບົດແນະນຳ

The Empress Effects Bass Compressor Pedal (Model CPBB) is an advanced effects unit designed for bass guitarists seeking precise dynamic control. This pedal offers a comprehensive set of features typically found in high-end studio equipment, including input and gain reduction metering, independent attack and release controls, a mix knob for parallel compression, and an external sidechain insert. Additionally, it incorporates a fully variable sidechain high-pass filter and a two-position 'tone + colour' circuit for subtle tone sculpting and harmonic enhancement. The pedal features an all-analog signal path, ensuring transparency and maintaining the instrument's original tone.

This manual provides detailed instructions for the setup, operation, and maintenance of your Empress Effects Bass Compressor Pedal.

2. ຕັ້ງຄ່າ

2.1 ການເຊື່ອມຕໍ່ພະລັງງານ

The Bass Compressor requires a 9V DC power supply with a minimum of 300mA. Connect the power adapter to the 9V DC input jack located on the top of the pedal. Ensure the power supply is center-negative.

ເທິງ view of Empress Effects Bass Compressor pedal showing power input, input/output jacks, and sidechain jacks.

ຮູບທີ 1: ທາງເທິງ view of the pedal, illustrating the power input, instrument input, instrument output, and sidechain connections.

2.2 ການເຊື່ອມຕໍ່ສຽງ

  1. ເຊື່ອມຕໍ່ guitar bass ຂອງທ່ານກັບ ປ້ອນຂໍ້ມູນ jack on the top of the pedal using a standard 1/4-inch instrument cable.
  2. ເຊື່ອມ​ຕໍ່ ອອກ jack on the top of the pedal to your ampເຄື່ອງເພີ່ມສັນຍານ ຫຼື ກະເບື້ອງຕໍ່ໄປໃນລະບົບຕ່ອງໂສ້ສັນຍານຂອງທ່ານໂດຍໃຊ້ສາຍເຄເບີ້ນເຄື່ອງມືມາດຕະຖານຂະໜາດ 1/4 ນິ້ວ.

2.3 Sidechain Connection (Optional)

For advanced compression techniques, an external sidechain signal can be used. Connect a 3.5mm TRS cable to the ຂ້າງຄຽງ jack. The tip is for send, the ring for return, and the sleeve for ground.

3. ການຄວບຄຸມການດໍາເນີນງານ

The Empress Effects Bass Compressor features a range of controls to precisely shape your bass tone. Familiarize yourself with each control for optimal performance.

ດ້ານໜ້າ view of Empress Effects Bass Compressor pedal with all knobs and switches clearly visible.

Figure 2: Front panel of the Bass Compressor pedal, highlighting all control knobs, switches, and LED meters.

3.1 ຫົວບິດ

  • ການປ້ອນຂໍ້ມູນ: Adjusts the input level of your instrument. This control determines the amount of signal fed into the compressor circuit, influencing the degree of compression.
  • ຂາອອກ: Controls the overall output volume of the pedal. Use this to match the compressed signal level with your bypassed signal or to boost the signal.
  • ການໂຈມຕີ: Sets how quickly the compressor reacts to signals exceeding the threshold. A faster attack (lower setting) will compress transients more aggressively, while a slower attack (higher setting) allows initial transients to pass through before compression engages.
  • ປ່ອຍ: Determines how quickly the compressor returns to its uncompressed state after the signal falls below the threshold. A faster release (lower setting) can make the compression less noticeable, while a slower release (higher setting) can provide a smoother, more sustained sound.
  • ປະສົມ: Blends the uncompressed (dry) signal with the compressed (wet) signal. This allows for parallel compression, preserving the natural dynamics of your instrument while adding sustain and density.
  • SC HP (Sidechain High Pass): A variable high-pass filter for the sidechain signal. This filters low frequencies from the sidechain, preventing the compressor from over-reacting to bass frequencies. The filter frequency ranges from 20Hz to 400Hz.

3.2 ສະວິດ

  • ອັດຕາສ່ວນ: A three-position toggle switch to select the compression ratio:
    • 2:1: Mild compression, suitable for subtle dynamic control.
    • 4:1: Moderate compression, a versatile setting for various playing styles.
    • 10:1: Heavy compression, for significant dynamic reduction and sustain.
  • TONE + COLOUR: A two-position toggle switch that adds subtle tone sculpting and harmonic distortion:
    • ປິດ: No additional tone shaping or harmonic distortion.
    • MID CUT: Applies a gentle mid-range cut.
    • UPPER MID BOOST: Provides an upper mid-range boost.

3.3 LED Meters

  • GAIN REDUCTION: Displays the amount of gain reduction (compression) being applied in decibels (dB).
  • ການປ້ອນຂໍ້ມູນ: Indicates the input signal level, helping to set the INPUT knob appropriately to achieve desired compression.

4. ບໍາລຸງຮັກສາ

  • ທໍາຄວາມສະອາດ: ໃຊ້ຜ້າປຽກແຫ້ງເພື່ອເຮັດຄວາມສະອາດດ້ານນອກຂອງ pedal. ຫຼີກລ້ຽງການເຮັດຄວາມສະອາດຂັດຫຼືສານລະລາຍ.
  • ການເກັບຮັກສາ: ເກັບຮັກສາ pedal ໃນສະພາບແວດລ້ອມທີ່ແຫ້ງແລ້ງ, ຫ່າງຈາກອຸນຫະພູມທີ່ສຸດແລະແສງແດດໂດຍກົງ.
  • ການສະຫນອງພະລັງງານ: Always use a regulated 9V DC, center-negative power supply with sufficient current (300mA minimum) to prevent damage.
  • ການເຊື່ອມຕໍ່: ຮັບປະກັນວ່າສາຍທັງໝົດຖືກເຊື່ອມຕໍ່ຢ່າງປອດໄພ ແລະບໍ່ມີຄວາມເສຍຫາຍ.

5. ການແກ້ໄຂບັນຫາ

ບັນຫາ ສາເຫດທີ່ເປັນໄປໄດ້ ການແກ້ໄຂ
ບໍ່ມີສຽງເມື່ອຕັ້ງແດມເກລ. Incorrect cable connection, no power, OUTPUT knob set to minimum. Check all audio and power cables. Ensure power supply is connected and functional. Increase OUTPUT knob setting.
Pedal is noisy or humming. Unsuitable power supply, ground loop, faulty cables. Use a high-quality, isolated power supply. Check for ground loops in your setup. Replace suspect cables.
Compression effect is too subtle or too extreme. INPUT, ATTACK, RELEASE, MIX, or RATIO settings are not optimized. Adjust the INPUT knob to achieve desired gain reduction as indicated by the meter. Experiment with ATTACK, RELEASE, MIX, and RATIO settings to find the desired compression characteristics.

If you encounter issues not covered here, please refer to the support information in Section 7.

6. ຂໍ້ມູນຈໍາເພາະ

  • ຕົວແບບ: CPBB
  • ເສັ້ນທາງສັນຍານ: ອະນາລັອກທັງໝົດ
  • ຄວາມຕ້ອງການພະລັງງານ: 9V DC, ຈຸດກາງລົບ, ຕໍ່າສຸດ 300mA
  • ການໂຕ້ຕອບຮາດແວ: 1/4" Audio Input/Output, 3.5mm TRS Sidechain
  • ອັດຕາສ່ວນການບີບອັດ: 2:1, 4:1, 10:1
  • Sidechain HP Filter Range: 20Hz ຫາ 400Hz
  • Low End Frequency Response: Flat down to 20Hz
  • ນ້ໍາຫນັກລາຍການ: 12.8 ອອນສ໌ (ປະມານ 363 ກຣາມ)
  • ຂະໜາດແພັກເກດ: 6.25 x 3.75 x 3 ນິ້ວ (ປະມານ 15.9 x 9.5 x 7.6 ຊມ)
  • ວັນທີທໍາອິດທີ່ມີ: ວັນທີ 6 ສິງຫາ 2021

7. ການຮັບປະກັນແລະການສະຫນັບສະຫນູນ

For warranty information and technical support, please refer to the official Empress Effects webເວັບໄຊ ຫຼືຕິດຕໍ່ຕົວແທນຈໍາໜ່າຍທີ່ໄດ້ຮັບອະນຸຍາດຂອງທ່ານ. ຮັກສາໃບຮັບເງິນການຊື້ຂອງທ່ານໄວ້ເປັນຫຼັກຖານການຊື້ສໍາລັບການຮ້ອງຂໍການຮັບປະກັນ.

ຊັບພະຍາກອນອອນໄລນ໌: www.empresseffects.com

ເອກະສານທີ່ກ່ຽວຂ້ອງ - CPBB

ກ່ອນview Empress Bass Compressor ຄູ່ມືຜູ້ໃຊ້
ຄູ່​ມື​ການ​ນໍາ​ໃຊ້​ສໍາ​ລັບ Empress Bass Compressor​, ລາຍ​ລະ​ອຽດ​ລັກ​ສະ​ນະ​ຂອງ​ຕົນ​, ການ​ຄວບ​ຄຸມ​, ການ​ດໍາ​ເນີນ​ງານ​, ຂໍ້​ແນະ​ນໍາ​ຄວາມ​ປອດ​ໄພ​, ແລະ​ສະ​ເພາະ​. ອອກແບບມາເພື່ອເສີມສຽງກີຕ້າເບສດ້ວຍການບີບອັດລະດັບສະຕູດິໂອ.
ກ່ອນview ຄູ່ມືຜູ້ໃຊ້ Empress Echosystem Dual Engine Delay
ຄູ່ມືຜູ້ໃຊ້ທີ່ສົມບູນແບບສຳລັບກະເບື້ອງ Empress Echosystem Dual Engine Delay ໂດຍ Empress Effects, ເຊິ່ງລາຍລະອຽດກ່ຽວກັບຄຸນສົມບັດ, ການຄວບຄຸມ, ໂໝດ, ຄ່າທີ່ຕັ້ງໄວ້ລ່ວງໜ້າ, ໜ້າທີ່ຂອງ looper, ການເຊື່ອມໂຍງ MIDI, ຕົວເລືອກການຕັ້ງຄ່າຂັ້ນສູງ, ການອັບເດດເຟີມແວ, ຄຳແນະນຳດ້ານຄວາມປອດໄພ, ແລະ ລາຍລະອຽດດ້ານເຕັກນິກ.
ກ່ອນview Empress Echosystem Delay Pedal: ຄຸນສົມບັດ, ການເຮັດວຽກ ແລະ ການອັບເດດເຟີມແວ
ສຳຫຼວດ Empress Echosystem, ກະເບື້ອງດີຈີຕອລທີ່ຫຼາກຫຼາຍຈາກ Empress Effects. ຄູ່ມືນີ້ກວມເອົາຄຸນສົມບັດຂັ້ນສູງ, ເຄື່ອງຈັກດີຈີຕອລຫຼາຍອັນ, ການເຊື່ອມໂຍງ MIDI/CV, ຕົວເລືອກຈັງຫວະການແຕະ, ແລະວິທີການອັບເດດເຟີມແວໂດຍໃຊ້ບັດ SD. ຮຽນຮູ້ກ່ຽວກັບແຜ່ນສຽງ ແລະ ຄວາມສາມາດໃນການສ້າງສຽງທີ່ເລິກເຊິ່ງ.
ກ່ອນview ຄູ່ມືຜູ້ໃຊ້ Empress Reverb - ເຟີມແວ v6.41
ຄູ່ມືຜູ້ໃຊ້ສຳລັບກະເບື້ອງເອັບເຟັກກີຕ້າ Empress Reverb, ເຊິ່ງລາຍລະອຽດກ່ຽວກັບຄຸນສົມບັດ, ໂໝດ, ການຄວບຄຸມ, ໜ້າທີ່ຂອງ looper, ການເຊື່ອມໂຍງ MIDI, ການຕັ້ງຄ່າຂັ້ນສູງ, ແລະຂໍ້ມູນຄວາມປອດໄພ. ລວມທັງຄຳແນະນຳ ແລະ ສະເປັກການອັບເດດເຟີມແວ.
ກ່ອນview ຄູ່ມືຜູ້ໃຊ້ Empress Effects Heavy Menace: ຄູ່ມືການປັບປ່ຽນສຽງລົບກວນ ແລະ ສຽງລົບກວນ
ຄູ່ມືຜູ້ໃຊ້ທີ່ຄົບຖ້ວນສຳລັບເປດີລກີຕ້າ Empress Effects Heavy Menace. ຮຽນຮູ້ກ່ຽວກັບການບິດເບືອນ, ປະຕູສຽງລົບກວນ, EQ, ການຄວບຄຸມ, ການຕັ້ງຄ່າເລີ່ມຕົ້ນດ່ວນ, ແລະຂໍ້ມູນຄວາມປອດໄພ.
ກ່ອນview Empress Phaser User Manual: Controls, Modes, and Specifications
Comprehensive user manual for the Empress Phaser guitar effects pedal, detailing controls, operating modes, submodes, configuration options, MIDI control, and technical specifications.