1. ບົດແນະນຳ
This manual provides essential information for the safe and effective use of your Ortis Refrigerator Surge Protector. This device is designed to safeguard your refrigerator and other home appliances from various electrical irregularities, including high and low voltage, spikes, instant surges, power failures, voltage fluctuations, brownouts, and load shedding. Please read this manual thoroughly before installation and operation.
2. ຂໍ້ມູນຄວາມປອດໄພ
- ຄວາມປອດໄພທາງໄຟຟ້າ: Always ensure the power outlet is properly grounded and rated for the device's specifications (120V/15A 60Hz).
- ໃຊ້ພາຍໃນເຮືອນເທົ່ານັ້ນ: This surge protector is intended for indoor use in dry locations. Do not expose it to moisture or extreme temperatures.
- ຄວາມເຂົ້າກັນໄດ້ຂອງອຸປະກອນ: Connect only appliances within the specified voltage and current limits. Do not overload the protector.
- ການກວດກາ: Regularly inspect the surge protector and its connected cables for any signs of damage. Discontinue use if damage is observed.
- ເດັກນ້ອຍແລະສັດລ້ຽງ: ຮັກສາອຸປະກອນໃຫ້ໄກຈາກເດັກນ້ອຍ ແລະສັດລ້ຽງ.
- ການຖອດອອກໄດ້: Do not attempt to open or modify the surge protector. Refer all servicing to qualified personnel.
3. ຄຸນລັກສະນະຂອງຜະລິດຕະພັນ
The Ortis Refrigerator Surge Protector is equipped with several features designed for optimal appliance protection:
- ການປົກປ້ອງທີ່ສົມບູນແບບ: Guards against high and low voltage, spikes, instant surges, power failures, voltage fluctuations, brownouts, and load shedding.
- ຮ້ານຄ້າຄູ່: Features two outlets, allowing protection for two appliances simultaneously, such as a refrigerator and a microwave, or a water cooler.
- ຕົວຊີ້ວັດ LED: Clear LED lights indicate the current voltage status (Normal, High Voltage, ຕ່ໍາສຸດ Voltage) and the active delay period.
- 3-Minute Time Delay: After a power fluctuation, the device initiates a 3-minute delay before re-establishing power. This ensures voltage stability and prevents damage from rapid power cycling.
- Plug-and-Play ອອກແບບ: Simple installation without complex wiring.
- ການອອກແບບປະຢັດພື້ນທີ່: ອອກແບບມາເພື່ອບໍ່ໃຫ້ກີດຂວາງຮ້ານຂາຍທີ່ຢູ່ໃກ້ຄຽງ.
ຮູບພາບ 3.1: ຫຼາຍກວ່າview of the Ortis Refrigerator Surge Protector and its key features.
4. ການຕິດຕັ້ງແລະການຕິດຕັ້ງ
Follow these steps to properly install your Ortis Refrigerator Surge Protector:
- ແກະກ່ອງ: ລະມັດລະວັງເອົາຕົວປ້ອງກັນກະແສໄຟຟ້າອອກຈາກການຫຸ້ມຫໍ່ຂອງມັນ.
- ກວດກາ: Check the device for any visible damage. Do not use if damaged.
- ຄົ້ນຫາ Outlet: Choose a standard 120V/15A wall outlet that is easily accessible and not shared with other high-power appliances.
- Plug In Protector: Insert the Ortis Refrigerator Surge Protector directly into the wall outlet. Ensure it is firmly seated.
- ເຊື່ອມຕໍ່ອຸປະກອນ: Plug your refrigerator and/or other compatible appliances (up to two) into the outlets on the surge protector. Ensure appliance plugs are in good condition.
- ການຕິດຕັ້ງ (ທາງເລືອກ): The unit can be mounted to the wall using screws or an adhesive pad (mounting hardware not included unless specified by manufacturer).
Image 4.1: The Ortis Refrigerator Surge Protector ready for connection to a wall outlet.
ຮູບພາບ 4.2: ຕົວຢ່າງample of the surge protector connected to a refrigerator and another appliance.
5. ຄໍາແນະນໍາການດໍາເນີນງານ
Once installed, the Ortis Refrigerator Surge Protector operates automatically. Observe the LED indicators for status information:
- ສະບັບປົກກະຕິtage (Green LED): When the green "Normal Voltage" LED is illuminated, the voltage is within the safe operating range (90VAC to 135VAC), and power is supplied to your appliances.
- ສູງtage (Red LED): If the red "High Voltage" LED lights up, the input voltage exceeds 135VAC. The protector will automatically cut off power to protect connected appliances.
- ຕ່ ຳtage (Red LED): If the red "Low Voltage" LED lights up, the input voltage drops below 90VAC. The protector will automatically cut off power to protect connected appliances.
- Delay Period (Yellow LED): After a power cut-off due to voltage abnormality, or when power is first applied, the yellow "Delay Period" LED will illuminate. This indicates a 3-minute waiting period before power is restored to ensure voltage stability. Do not unplug appliances during this period.
Image 5.1: Explanation of the LED indicators on the surge protector.
6. ບໍາລຸງຮັກສາ
The Ortis Refrigerator Surge Protector requires minimal maintenance. Follow these guidelines to ensure its longevity and optimal performance:
- ທໍາຄວາມສະອາດ: Disconnect the device from the wall outlet before cleaning. Use a soft, dry cloth to wipe the exterior. Do not use liquid cleaners or abrasive materials.
- ເງື່ອນໄຂສິ່ງແວດລ້ອມ: Ensure the device is kept in a dry, well-ventilated area, away from direct sunlight, heat sources, and moisture.
- ການຄຸ້ມຄອງສາຍໄຟ: Avoid bending or crimping the power cord excessively.
7. ການແກ້ໄຂບັນຫາ
If you encounter issues with your Ortis Refrigerator Surge Protector, refer to the following common problems and solutions:
| ບັນຫາ | ສາເຫດທີ່ເປັນໄປໄດ້ | ການແກ້ໄຂ |
|---|---|---|
| No power to appliances, no LEDs lit. | Protector not plugged in, wall outlet has no power, or internal fault. | Ensure protector is fully plugged into a live outlet. Test the wall outlet with another device. If still no power, the unit may be faulty. |
| Red "High Voltage" or "Low Voltage" LED is lit, no power to appliances. | ການປ້ອນຂໍ້ມູນ voltage is outside safe operating range. | This is normal operation. The protector is safeguarding your appliances. Wait for the voltage to stabilize and the "Delay Period" LED to activate, followed by the "Normal Voltage" LED. |
| Yellow "Delay Period" LED is lit for more than 3 minutes. | ສະບັບtage fluctuations are ongoing, or an internal fault. | Ensure the power supply is stable. If the delay persists indefinitely, unplug the protector, wait a few minutes, and plug it back in. If the issue continues, contact customer support. |
| Appliances are not receiving power, but "Normal Voltage" LED is lit. | Appliance issue, or loose connection. | Check if the appliance is properly plugged into the protector. Test the appliance by plugging it directly into a wall outlet (if safe to do so). |
8. ຂໍ້ມູນຈໍາເພາະ
- ຕົວແບບ: B09BN44ZPZ
- ຍີ່ຫໍ້: Ortis
- ຂະໜາດຜະລິດຕະພັນ: 2 x 1 x 1 ນິ້ວ (ໂດຍປະມານ)
- ນ້ໍາຫນັກລາຍການ: 11.3 ອອນ
- ຄວາມຍາວສາຍ: 18.1 ນິ້ວ
- ສີ: ສີສົ້ມ
- ປລັກສຽບໄຟທັງໝົດ: 2
- ສະບັບtage ການຈັດອັນດັບ: 120V / 15A / 60Hz
- ສູງtage ຕັດອອກ: > 135VAC
- ຕ່ ຳtage ຕັດອອກ: <90VAC
- ການຊັກຊ້າເວລາ: 3 ນາທີ
- ວັນທີທໍາອິດທີ່ມີ: ວັນທີ 22 ສິງຫາ 2021
Image 8.1: Physical dimensions of the Ortis Refrigerator Surge Protector.
9. ການຮັບປະກັນແລະການສະຫນັບສະຫນູນ
For warranty information or technical support, please refer to the contact details provided with your product packaging or visit the official Ortis webເວັບໄຊ. ຮັກສາໃບຮັບເງິນການຊື້ຂອງທ່ານໄວ້ເປັນຫຼັກຖານການຊື້.
