ຄູ່ມືການໃຊ້ງານ lightmaXX Vega BAT LED 4x12 W RGBAWUV

1. ບົດແນະນຳ

1.1 ຜະລິດຕະພັນເກີນview

The lightmaXX Vega BAT LED is a versatile, battery-powered uplight designed for various lighting applications. It features four 12-watt RGBAWUV (Red, Green, Blue, Amber, White, UV) LEDs, providing a broad spectrum of color mixing capabilities. With an 80W power output, this fixture supports both 6 and 10 DMX channels for precise control in professional setups. Operating modes include automatic programs, sound-activated effects, master/slave configurations, and convenient control via an infrared (IR) remote.

1.2 ຂໍ້ມູນຄວາມປອດໄພ

• ເຊື່ອມຕໍ່ອຸປະກອນກັບປລັກສຽບໄຟທີ່ມີຮາກຖານຢູ່ສະເໝີ.
• ຫ້າມເປີດທີ່ຢູ່ອາໄສ; ບໍ່ມີສ່ວນທີ່ຜູ້ໃຊ້ບໍລິການພາຍໃນ. ອ້າງອີງການບໍລິການທັງໝົດໃຫ້ກັບບຸກຄະລາກອນທີ່ມີຄຸນວຸດທິ.
• ຫຼີກເວັ້ນການສໍາຜັດກັບຕາໂດຍກົງກັບແຫຼ່ງແສງສະຫວ່າງ.
• ຮັບປະກັນການລະບາຍອາກາດຢ່າງພຽງພໍຮອບໜ່ວຍເພື່ອປ້ອງກັນຄວາມຮ້ອນເກີນ.
• ຮັກສາອຸປະກອນໃຫ້ຫ່າງຈາກຄວາມຊຸ່ມຊື່ນ ແລະອຸນຫະພູມທີ່ຮຸນແຮງ.
• ເຄື່ອງໃຊ້ນີ້ຕ້ອງຖືກດິນ.

2. ເນື້ອໃນຊຸດ

Please check that all items listed below are present and in good condition upon unpacking:

• lightmaXX Vega BAT LED 4x12 W RGBAWUV unit
• ການຄວບຄຸມໄລຍະໄກ IR
• ສາຍໄຟ
• ຄູ່ມືແນະ ນຳ (ເອກະສານນີ້)

ຮູບພາບ 2.1: Power cable with a standard European plug and a blue locking connector for the light fixture.

ຮູບພາບ 2.2: Infrared remote control with various color, mode, and numerical buttons for operating the LED spot.

3. ຕັ້ງຄ່າ

3.1 ການສາກໄຟເບື້ອງຕົ້ນ

Before first use, fully charge the internal battery. Connect the provided power cable to the unit's power input and then to a suitable 240V AC power outlet. The charging indicator (if available on the display) will show the charging status. A full charge typically takes several hours.

3.2 ການຈັດວາງ

Position the Vega BAT LED on a stable, flat surface or mount it using appropriate clamps and safety cables (not included) to a truss or stand. Ensure the unit is placed in a location with good air circulation and away from direct heat sources or flammable materials.

3.3 ການເຊື່ອມຕໍ່

For standalone operation, simply power on the unit after charging. For DMX control, connect a DMX cable from your DMX controller to the DMX IN port of the Vega BAT LED. If linking multiple units, connect the DMX OUT of the first unit to the DMX IN of the next, and so on.

ຮູບພາບ 3.1: ລຸ່ມ view of the light fixture showing the power input, DMX ports, and regulatory labels.

4. ການດໍາເນີນງານ

4.1 ກະດານຄວບຄຸມ

The unit features an onboard control panel with a display and four buttons: MENU, DOWN, UP, and ENTER. This panel allows for direct access to settings and operating modes.

ຮູບພາບ 4.1: ດ້ານໜ້າ view of the control panel with display and navigation buttons.

ຮູບພາບ 4.2: ເທິງ view of the control panel, showing the display and button layout.

• ເມນູ: Cycles through the main menu options.
• ລົງ: Decreases values or navigates down through menu options.
• ຂຶ້ນ: Increases values or navigates up through menu options.
• ຕື່ມ: ຢືນຢັນການເລືອກ ຫຼືໃສ່ເມນູຍ່ອຍ.

4.2 ການຄວບຄຸມໄລຍະໄກ IR

The included IR remote control provides convenient wireless operation for various functions, including color selection, mode changes, and power on/off.

• ເປີດ/ປິດ: ເປີດ ຫຼື ປິດເຄື່ອງ.
• R, G, B, A, W, UV: Direct access to Red, Green, Blue, Amber, White, and Ultraviolet colors.
• 0-9: Numerical buttons for selecting specific programs or DMX addresses.
• ອັດຕະໂນມັດ: ເປີດໃຊ້ງານໂໝດໂປຣແກຣມອັດຕະໂນມັດ.
• ສະກຸນ: Activates strobe effect.
• ຈືດໆ: ເປີດໃຊ້ໂໝດຫຼຸດສີ.
• ສຽງ: ເປີດໃຊ້ໂໝດເປີດສຽງ.

4.3 ຮູບແບບການໃຊ້ງານ

The Vega BAT LED offers several operating modes:

• ໂໝດອັດຕະໂນມັດ: The unit cycles through pre-programmed color changes and effects. Selectable via the control panel or IR remote.
• ແບບສຽງ: The light reacts to ambient sound, creating dynamic effects. Sensitivity can often be adjusted via the control panel.
• ຮູບແບບແມ່ບົດ/ສໍາລອງ: Link multiple units where one acts as the master, controlling all connected slave units. Connect DMX cables in a daisy chain.
• ໂໝດ DMX: For professional control using a DMX controller. The unit supports 6 or 10 DMX channels, allowing for granular control over color mixing, dimming, strobe, and internal programs. Set the DMX address via the control panel.

ຮູບພາບ 4.3: The light fixture emitting ultraviolet (UV) light.

ຮູບພາບ 4.4: The light fixture emitting amber-colored light.

5. ບໍາລຸງຮັກສາ

5.1 ການທໍາຄວາມສະອາດ

Regularly clean the lens and exterior housing with a soft, lint-free cloth. For stubborn dirt, a slightly damp cloth can be used. Do not use abrasive cleaners or solvents, as they may damage the finish or optical components.

5.2 ການດູແລຫມໍ້ໄຟ

To prolong battery life, avoid fully discharging the unit frequently. If storing the unit for an extended period, ensure the battery is charged to approximately 50-70% and recharge it every 3-6 months. Store in a cool, dry place.

5.3 ການເກັບຮັກສາ

When not in use, store the Vega BAT LED in its original packaging or a suitable protective case to prevent damage from dust, moisture, and impacts.

6. ການແກ້ໄຂບັນຫາ

• ຫນ່ວຍບໍລິການບໍ່ເປີດ: Ensure the battery is charged or the power cable is securely connected to a live outlet. Check the power switch.
• ບໍ່ມີຜົນຜະລິດແສງສະຫວ່າງ: Verify the unit is powered on and not in standby mode. Check selected operating mode and brightness settings.
• IR remote not working: Ensure there are no obstructions between the remote and the unit's IR receiver. Check the remote's battery.
• DMX control issues: Verify DMX cable connections, DMX address settings on the unit, and DMX channel mode. Ensure your DMX controller is functioning correctly.
• ອາຍຸການໃຊ້ງານຂອງແບັດເຕີຣີສັ້ນ: The battery may require a full charge cycle. Over time, battery capacity can decrease; consider battery replacement if performance significantly degrades.

7. ຂໍ້ມູນຈໍາເພາະ

8. ການຮັບປະກັນແລະການສະຫນັບສະຫນູນ

For warranty information and technical support, please refer to the documentation provided at the time of purchase or contact your authorized lightmaXX dealer. Keep your proof of purchase for warranty claims.