ແນະນຳ
Thank you for choosing the Lepro 5m RGB LED Strip Light. This product is designed to provide versatile and vibrant lighting for various indoor applications. Featuring high-brightness SMD5050 LEDs, a wide range of colors, and easy installation, it enhances the ambiance of any space. Please read this manual carefully before installation and use to ensure proper operation and safety.
ແມ່ນຫຍັງຢູ່ໃນກ່ອງ
ກວດສອບວ່າອົງປະກອບທັງຫມົດແມ່ນມີຢູ່ກ່ອນທີ່ຈະເລີ່ມຕົ້ນການຕິດຕັ້ງ:
- LED Strip Light (5 meters) x 1
- DC12V Power Adapter x 1
- Connection Receiver x 1
- ການຄວບຄຸມໄລຍະໄກ x 1
- Instruction Manual (Japanese) x 1
ຂໍ້ມູນຄວາມປອດໄພ
- ຜະລິດຕະພັນນີ້ຖືກອອກແບບມາສໍາລັບ ໃຊ້ພາຍໃນເຮືອນເທົ່ານັ້ນ. Do not expose to water or high humidity.
- ໃຫ້ແນ່ໃຈວ່າການປິດການສະຫນອງພະລັງງານກ່ອນທີ່ຈະຕິດຕັ້ງຫຼືບໍາລຸງຮັກສາ.
- Use only the provided DC12V power adapter. Using an incompatible power supply may damage the product or pose a fire hazard.
- Do not bend the LED strip sharply or apply excessive force, as this may damage the circuit.
- ຮັກສາໃຫ້ໄກຈາກເດັກນ້ອຍ.
- If any part of the product is damaged, discontinue use immediately and contact support.
ຕັ້ງຄ່າ
Follow these steps for proper installation of your LED strip light:
- ການກະກຽມຫນ້າດິນ: Clean the desired installation surface thoroughly. Ensure it is dry, smooth, and free of dust or oil for optimal adhesive performance.
- ວັດແທກແລະຕັດ (ທາງເລືອກ): If a shorter length is required, cut the LED strip along the designated cut marks (indicated by a scissor icon) using scissors. ໝາຍເຫດ: Only cut at these specific marks. Cutting elsewhere will damage the strip. Cut sections cannot be reconnected without additional connectors (sold separately).
- ນຳໃຊ້ແຖບ: Peel off the backing from the 3M adhesive tape on the back of the LED strip. Carefully press the strip onto the cleaned surface, ensuring firm contact along its entire length.
- ເຊື່ອມຕໍ່ອົງປະກອບ: Connect the LED strip to the connection receiver, ensuring the arrows on both components align. Then, connect the DC12V power adapter to the receiver.
- ເປີດ: Plug the power adapter into a suitable power outlet. Remove the insulation sheet from the remote control before first use. Point the remote control towards the receiver and press the power button to turn on the lights.
ຄໍາແນະນໍາການດໍາເນີນງານ
The LED strip light is controlled using the included 44-key remote control. Ensure the remote is pointed towards the receiver for effective operation.
ຟັງຊັນການຄວບຄຸມໄລຍະໄກ:
- ເປີດ/ປິດ: ກົດ red power button to turn the lights on or off.
- ການປັບຄວາມສະຫວ່າງ: ໃຊ້ ປຸ່ມລູກສອນຂຶ້ນ ແລະ ລົງ (labeled 'Brightness Adjust') to increase or decrease the light intensity.
- ການເລືອກສີ: ເລືອກຈາກ 20 ສີທີ່ຕັ້ງໄວ້ລ່ວງຫນ້າ by pressing the corresponding color buttons.
- ໂໝດ DIY: ໄດ້ DIY1-DIY6 buttons allow you to create and save custom colors by adjusting the Red, Green, and Blue intensity using the RGB arrow buttons.
- ໂໝດໄດນາມິກ:
- ໄວ/ຊ້າ: ປັບຄວາມໄວຂອງໂໝດໄດນາມິກ.
- ອັດຕະໂນມັດ: Cycles through all dynamic modes automatically.
- ກະແສໄຟຟ້າ: Flashes through colors.
- JUMP3/JUMP7: Jumps between 3 or 7 colors.
- FADE3/FADE7: ຈາງລົງລະຫວ່າງ 3 ຫຼື 7 ສີ.
ບໍາລຸງຮັກສາ
- ທໍາຄວາມສະອາດ: Ensure the power is off and unplugged before cleaning. Gently wipe the LED strip with a dry, soft cloth. Do not use harsh chemicals or abrasive cleaners.
- ການເກັບຮັກສາ: If storing the strip for an extended period, ensure it is clean and dry. Roll it loosely to prevent damage to the LEDs or circuit. Store in a cool, dry place away from direct sunlight.
- ການດູແລກາວ: The 3M adhesive is strong, but repeated removal and reapplication may reduce its effectiveness.
ການແກ້ໄຂບັນຫາ
| ບັນຫາ | ສາເຫດທີ່ເປັນໄປໄດ້ | ການແກ້ໄຂ |
|---|---|---|
| ແຖບ LED ບໍ່ສະຫວ່າງ. | 1. Power adapter not plugged in. 2. Remote control insulation sheet not removed. 3. Connections are loose or incorrect. 4. Remote control battery is dead. | 1. Ensure power adapter is securely plugged into an outlet. 2. Remove the clear plastic insulation sheet from the remote control battery compartment. 3. Check all connections, ensuring arrows align between the strip and receiver. 4. Replace the remote control battery (CR2025 or equivalent). |
| ການຄວບຄຸມໄລຍະໄກບໍ່ຕອບສະຫນອງ. | 1. Remote not pointed at receiver. 2. Obstruction between remote and receiver. 3. Remote control battery is dead. | 1. Point the remote directly at the receiver. 2. Remove any objects blocking the line of sight. 3. ປ່ຽນແບັດຄວບຄຸມໄລຍະໄກ. |
| Some sections of the strip are not lighting up. | 1. Damage to the LED strip. 2. Incorrect cutting. | 1. Inspect the strip for physical damage. If damaged, contact support. 2. Ensure cuts were made only at designated marks. |
ຂໍ້ມູນຈໍາເພາະ
- ໝາຍເລກຕົວແບບ: PR410082-RGB-JP
- ຍີ່ຫໍ້: ເລໂປ
- ປະເພດແຫຼ່ງແສງ: LED (SMD5050)
- ປະລິມານ LED: 150 LEDs (30 LEDs per meter)
- ຄວາມຍາວແຖບ: 5 ແມັດ
- ການບໍລິໂພກພະລັງງານ: 18W
- ການປ້ອນຂໍ້ມູນ Voltage: DC12V 1.5A
- ຕົວເລືອກສີ: RGB (20 preset colors + DIY modes)
- ວິທີການຄວບຄຸມ: 44-key IR Remote Control
- ການນໍາໃຊ້ພາຍໃນ/ນອກ: ພາຍໃນ
- ຄຸນນະສົມບັດພິເສດ: Dimmable, Cuttable, 3M Adhesive, PSE Certified
- ຂະໜາດແພັກເກດ: ຂະ ໜາດ 13.1 x 10.7 x 6.7 ຊມ; 230 ກ
ການຮັບປະກັນແລະການສະຫນັບສະຫນູນ
This Lepro LED Strip Light comes with a ຮັບປະກັນ 2 ປີ. If you encounter any issues or have questions regarding the product, please contact Lepro JP customer support through the retailer's platform. Provide your order details and a description of the issue for prompt assistance.
For further assistance, you can visit the official Lepro store on Amazon: Lepro Amazon Store
