aigo AZ300 Mid Tower Computer Case User Manual

1. ບົດແນະນຳ

Thank you for choosing the aigo AZ300 Mid Tower Computer Case. This manual provides detailed instructions for the installation, operation, and maintenance of your new computer case. Please read this manual thoroughly before beginning installation to ensure proper setup and safe use.

Figure 1: aigo AZ300 Mid Tower Computer Case (White)

2. ຂໍ້ມູນຄວາມປອດໄພ

• Always disconnect the power supply from the wall outlet before installing or servicing any components inside the case.
• Handle tempered glass panels with care. They are fragile and can break if dropped or subjected to impact.
• Avoid placing the case in areas with high humidity, extreme temperatures, or direct sunlight.
• ເກັບຮັກສາຊິ້ນສ່ວນຂະໜາດນ້ອຍ ແລະ ສະກູໃຫ້ໄກຈາກເດັກນ້ອຍ.
• ຮັບປະກັນການຖົມດິນຢ່າງຖືກຕ້ອງເພື່ອປ້ອງກັນອັນຕະລາຍຈາກໄຟຟ້າ.

3. ຜະລິດຕະພັນເກີນview

3.1 ແຜງ I/O ດ້ານໜ້າ

The front I/O panel provides convenient access to essential ports and controls.

Figure 2: Front I/O Panel Layout

• Type-C Port: 1x USB Type-C port for modern connectivity.
• ພອດ USB 2.0: 1x USB 2.0 port for peripheral connections.
• ພອດ USB 3.0: 1x USB 3.0 port for high-speed data transfer.
• HD Audio (Headset/Microphone): Separate jacks for audio output and microphone input.
• Reset/LED Button: Resets the system or controls LED lighting (if applicable).
• ປຸ່ມເປີດປິດ: Turns the computer on or off.

3.2 Internal Layout and Component Compatibility

The aigo AZ300 case offers a spacious interior designed for various component sizes and efficient cooling.

Figure 3: Internal Component and Cooling Layout

• ຄວາມເຂົ້າກັນໄດ້ຂອງເມນບອດ: Supports ATX, Micro-ATX, and ITX motherboards.
• Storage Drive Bays: 2x 2.5" SSD bays and 2x 3.5" HDD bays.
• ຄວາມຍາວ GPU: Maximum GPU length of 400mm.
• ຄວາມຍາວ PSU: Supports standard ATX power supplies up to 200mm.

4. ຄູ່ມືການຕິດຕັ້ງ

4.1 ການກະກຽມກໍລະນີ

1. ວາງກະເປົ໋າໄວ້ເທິງພື້ນຜິວທີ່ຮາບພຽງ ແລະ ໝັ້ນຄົງ.
2. Carefully remove the tempered glass side panels by unscrewing the thumb screws at each corner. Set the panels aside in a safe place.

Figure 4: Rear-Side View of Case

4.2 ການຕິດຕັ້ງເມນບອດ

1. ຕິດຕັ້ງແຜ່ນປ້ອງກັນ I/O (ຖ້າບໍ່ໄດ້ຕິດຕັ້ງໄວ້ລ່ວງໜ້າ) ໃສ່ທາງຫຼັງຂອງເຄສ.
2. Align your ATX, Micro-ATX, or ITX motherboard with the standoffs inside the case. Ensure all standoffs match the motherboard's mounting holes.
3. ຮັບປະກັນ motherboard ດ້ວຍ screws ທີ່ສະຫນອງໃຫ້.

Figure 5: Motherboard Mounting Areas

4.3 ການຕິດຕັ້ງຫນ່ວຍບໍລິການພະລັງງານ (PSU).

1. ຊອກຫາພື້ນທີ່ຕິດຕັ້ງ PSU ຢູ່ທາງລຸ່ມດ້ານຫຼັງຂອງເຄສ.
2. Slide your ATX power supply into the designated slot.
3. Secure the PSU to the case with screws from the rear.

4.4 ການຕິດຕັ້ງ Drive Storage

1. 2.5" SSDs: Mount SSDs to the dedicated 2.5" bays, typically located behind the motherboard tray or in specific drive cages.
2. ຮາດດິດ 3.5": Install HDDs into the 3.5" drive cages, usually found at the bottom front of the case.
3. Secure all drives with the appropriate screws.

Figure 6: Rear Internal View with Drive Bays

4.5 ການຕິດຕັ້ງກາດຂະຫຍາຍ (GPU)

1. ເອົາຝາປິດຊ່ອງຂະຫຍາຍທີ່ຈຳເປັນອອກຈາກດ້ານຫຼັງຂອງເຄສ.
2. ໃສ່ກາດກຣາບຟິກ ຫຼື ບັດຂະຫຍາຍອື່ນໆຂອງທ່ານເຂົ້າໃນຊ່ອງ PCIe ທີ່ເໝາະສົມໃນເມນບອດ.
3. ຮັດບັດໃຫ້ແໜ້ນດ້ວຍສະກູ.

4.6 ການຕິດຕັ້ງລະບົບເຮັດຄວາມເຢັນ

The aigo AZ300 supports flexible cooling configurations.

• ສະຫນັບສະຫນູນແຟນ: Multiple 120mm fan mounting points are available at the top, front, and rear.
• ສະ​ຫນັບ​ສະ​ຫນູນ​ລັງ​ສີ​: Supports water coolers with radiators of 360mm, 240mm, and 120mm in designated areas.

4.7 ການຈັດການສາຍ

Utilize the cable routing cutouts and tie-down points behind the motherboard tray to manage cables for improved airflow and aesthetics.

5. ການດໍາເນີນງານ

After all components are installed and connected, reattach the tempered glass side panels. Connect your peripherals, monitor, and power cable. Press the power button on the front I/O panel to start your system.

Use the USB ports (Type-C, USB 2.0, USB 3.0) for connecting external devices. The HD Audio jacks are for headphones and microphones.

6. ບໍາລຸງຮັກສາ

ການບຳລຸງຮັກສາເປັນປະຈຳຊ່ວຍຮັບປະກັນປະສິດທິພາບທີ່ດີທີ່ສຸດ ແລະ ອາຍຸການໃຊ້ງານທີ່ຍາວນານຂອງອຸປະກອນຄອມພິວເຕີຂອງທ່ານ.

6.1 ການເຮັດຄວາມສະອາດກອງຂີ້ຝຸ່ນ

The aigo AZ300 case is equipped with dust filters to prevent dust buildup. Clean these filters periodically.

• Top Magnetic Dust Filter: Gently lift and remove the magnetic dust filter from the top panel. Clean it with compressed air or rinse with water (ensure it's completely dry before reattaching).
• ເຄື່ອງກອງຂີ້ຝຸ່ນ PSU: The dust filter for the power supply is located at the bottom of the case. Slide it out for cleaning.

Figure 7: Side Panel and Bottom Dust Filter Location

7. ການແກ້ໄຂບັນຫາ

• ລະບົບບໍ່ໄດ້ເປີດ: Ensure all power cables (24-pin ATX, 8-pin CPU, GPU power) are securely connected. Check that the power supply switch is in the 'ON' position. Verify front panel power button connection to the motherboard.
• ບໍ່ມີການສະແດງຜົນ: Confirm the monitor is connected to the graphics card (not the motherboard integrated graphics, unless no dedicated GPU is present). Reseat the graphics card and RAM modules.
• ຄວາມຮ້ອນເກີນ: Ensure all case fans are spinning and oriented correctly for airflow (intake/exhaust). Clean dust filters and internal components. Verify CPU cooler installation.
• ພອດ USB ບໍ່ເຮັດວຽກ: Check that the USB headers from the front panel are correctly connected to the motherboard.

8. ຂໍ້ມູນຈໍາເພາະ

9. ການຮັບປະກັນແລະການສະຫນັບສະຫນູນ

aigo strives to provide excellent customer service. If you encounter any quality issues with your aigo AZ300 computer case, please contact us directly. We will assist you with troubleshooting and resolution.

For support, please refer to the contact information provided with your purchase or visit the official aigo webເວັບໄຊ.