ແນະນຳ
The MARANTEC 122459 is a 4-channel handheld remote control designed for operating garage door systems. It utilizes the secure and proven Multi-Bit radio system, developed by Marantec for reliable drive control. This manual provides essential information for the setup, operation, maintenance, and troubleshooting of your remote control.
ຮູບ 1: ດ້ານຫນ້າ view of the MARANTEC 122459 Handheld Remote Control, showing the four control buttons and LED indicator.
ຄຸນສົມບັດຜະລິດຕະພັນ
- 4-Channel Control: Ergonomic design allows operation of up to 4 doors or functions.
- Multi-Bit Wireless System: Features a secure 48-bit encryption with 70 million different transmission codes, ensuring high security.
- Easy Code Learning: Programming is simplified by copying the code from one button to another or via a standard coding plug.
- ຕົວຊີ້ວັດ LED: A red LED signals button presses and indicates low battery status.
- ແຫຼ່ງພະລັງງານ: Powered by a standard CR2032 battery.
- ຄວາມເຂົ້າກັນໄດ້: Works with all Marantec motors equipped with bi-linked radio receivers and other drive systems using universal bi-linked receivers.
- ອຸປະກອນເສີມ: Includes a keyring attachment and a wall mount for convenient storage.
- ຄຸນະພາບ: Manufactured in Germany.
ເນື້ອໃນຊຸດ
ກວດສອບວ່າລາຍການທັງຫມົດແມ່ນມີຢູ່ໃນຊຸດ:
- MARANTEC 122459 Handheld Transmitter
- ວົງເລັບ Mount
- Dowels and Screws for Wall Mount
- ໝໍ້ໄຟ CR2032 (ຕິດຕັ້ງໄວ້ລ່ວງໜ້າ ຫຼືແຍກກັນ)
- ຄູ່ມືຜູ້ໃຊ້ (ເອກະສານນີ້)
ຕັ້ງຄ່າ
1. ການຕິດຕັ້ງຫມໍ້ໄຟ
The remote control is powered by a CR2032 lithium-manganese dioxide battery. Ensure the battery is correctly installed with the positive (+) side facing up.
ຮູບ 2: ກັບຄືນໄປບ່ອນ view of the remote control, showing the battery compartment. Open the compartment to insert or replace the CR2032 battery.
2. Programming the Remote Control (Code Learning)
The wireless code can be transmitted to the new remote control in two primary ways:
- Copying from an Existing Transmitter: Place the new remote control next to an existing, programmed Marantec Multi-Bit transmitter. Press and hold the desired button on the existing transmitter, then press and hold the corresponding button on the new transmitter. The LED on the new transmitter will indicate successful code transfer (refer to your drive unit's manual for specific LED patterns).
- Using the Standard Coding Plug or Drive Unit: Refer to your Marantec drive unit's instruction manual for detailed steps on how to program a new remote control directly into the drive's receiver. This typically involves pressing a programming button on the drive unit and then a button on the new remote control.
Each motor uses a unique code. If a transmitter is lost, a new code can be programmed for all other devices, rendering the lost transmitter non-functional for security purposes.
3. ການຕິດຕັ້ງ Wall Mount
The included wall mount allows for convenient storage of your remote control. Choose a suitable location near your garage door or entry point. Use the provided dowels and screws to securely attach the bracket to the wall.
ຄໍາແນະນໍາການດໍາເນີນງານ
1. ການນໍາໃຊ້ພື້ນຖານ
To operate your garage door or other programmed function, simply press the corresponding button on the remote control. The red LED will illuminate to confirm the button press and signal transmission.
Figure 3: A hand holding the remote control and pressing one of the four buttons to activate a function.
2. ຄວາມໝາຍຂອງໄຟສະແດງຜົນ LED
- ແສງສະຫວ່າງສີແດງແຂງ: Indicates a successful button press and signal transmission.
- Rapidly Flashing Red Light: Signals that the battery is low and needs to be replaced soon.
ບໍາລຸງຮັກສາ
1. ການທົດແທນຫມໍ້ໄຟ
When the LED indicator flashes rapidly during operation, it is time to replace the CR2032 battery. To replace:
- Open the battery compartment cover on the back of the remote control (refer to Figure 2).
- ເອົາແບັດ CR2032 ເກົ່າອອກ.
- ໃສ່ແບັດ CR2032 ໃໝ່ ໂດຍໃຫ້ດ້ານບວກ (+) ຫັນໜ້າຂຶ້ນ.
- ປິດຝາປິດຊ່ອງໃສ່ຫມໍ້ໄຟຢ່າງປອດໄພ.
2. ທໍາຄວາມສະອາດ
ທຳຄວາມສະອາດຣີໂໝດຄວບຄຸມດ້ວຍຜ້າອ່ອນໆແລະແຫ້ງ. ຢ່າໃຊ້ນ້ຳຢາທຳຄວາມສະອາດທີ່ມີສີຂັດ ຫຼື ສານລະລາຍ, ເພາະວ່າສິ່ງເຫຼົ່ານີ້ສາມາດທຳລາຍຣີໂໝດຄວບຄຸມໄດ້.asing ຫຼືອົງປະກອບພາຍໃນ.
ການແກ້ໄຂບັນຫາ
| ບັນຫາ | ສາເຫດທີ່ເປັນໄປໄດ້ | ການແກ້ໄຂ |
|---|---|---|
| Remote control does not operate the garage door. | ແບັດເຕີຣີເຫຼືອໜ້ອຍ ຫຼືໝົດແລ້ວ. | ປ່ຽນແບັດ CR2032. |
| Remote control is not programmed or has lost its code. | Reprogram the remote control following the instructions in the "Programming the Remote Control" section. | |
| ການຄວບຄຸມໄລຍະໄກຢູ່ນອກຂອບເຂດ. | ຍ້າຍເຂົ້າໄປໃກ້ເຄື່ອງເປີດປະຕູໂຮງລົດ. | |
| LED does not light up when a button is pressed. | Battery is completely depleted or incorrectly installed. | Check battery installation or replace the battery. |
| LED flashes rapidly when a button is pressed. | ແບັດເຕີຣີເຫຼືອໜ້ອຍ. | ປ່ຽນແບັດ CR2032. |
ຂໍ້ມູນຈໍາເພາະ
| ຄຸນສົມບັດ | ຂໍ້ມູນຈໍາເພາະ |
|---|---|
| ໝາຍເລກຕົວແບບ | 122459 |
| ຊ່ອງ | 4 |
| ຂະໜາດ (L x W x H) | 86 x 39 x 12 ມມ |
| ນ້ຳໜັກ | 40 ກຣາມ |
| ສີ | ສີເທົາ |
| ວັດສະດຸ | ພາດສະຕິກ |
| ປະເພດຫມໍ້ໄຟ | CR2032 Lithium-Manganese Dioxide |
| ຜູ້ຜະລິດ | Marantec |
| ປະເທດຕົ້ນກໍາເນີດ | ເຢຍລະມັນ |
ຂໍ້ມູນຄວາມປອດໄພ
- Keep remote controls out of reach of children to prevent accidental operation of the garage door.
- ຢ່າອະນຸຍາດໃຫ້ເດັກນ້ອຍຫຼິ້ນກັບຣີໂໝດຄວບຄຸມ ຫຼື ເຄື່ອງເປີດປະຕູໂຮງລົດ.
- Operate the garage door only when it is in full view ແລະ ປາສະຈາກສິ່ງກີດຂວາງ.
- Never walk or drive through a moving garage door.
- ຖິ້ມbatteriesໍ້ໄຟທີ່ໃຊ້ແລ້ວໄປຕາມກົດລະບຽບທ້ອງຖິ່ນ.
- Do not expose the remote control to water or extreme temperatures.
ການຮັບປະກັນແລະການສະຫນັບສະຫນູນ
For warranty information or technical support, please refer to the documentation provided with your garage door opener system or contact Marantec customer service directly. Specific warranty details for the remote control are typically covered under the main drive unit's warranty.
