ZUZONG 2i2 USB Audio Interface User Manual

ແນະນຳ

The ZUZONG 2i2 USB Audio Interface is a high-definition recording device designed for mobile musicians, podcasters, and anyone seeking professional audio quality for their computer, smartphone, or tablet. Featuring 24-bit, 96 kHz resolution and high-performance Class A mic preamplifiers, this compact and ruggedly built interface ensures clear and precise sound capture.

ຄຸນ​ນະ​ສົມ​ບັດ​ທີ່​ສໍາ​ຄັນ​ປະ​ກອບ​ມີ​:

• Compatible with popular recording software, including Avid Pro Tools, Ableton Live, Steinberg Cubase, etc.
• Audiophile 48 kHz resolution for professional audio quality.
• 2x2 USB audio interface for recording microphones and instruments.
• Studio-grade converters for 24-bit/96 kHz recording.

ຮູບ 1: ດ້ານຫນ້າ view of the ZUZONG 2i2 USB Audio Interface.

ຄູ່ມືການຕິດຕັ້ງ

Follow these steps to set up your ZUZONG 2i2 USB Audio Interface:

1. ເຊື່ອມ​ຕໍ່​ກັບ​ຄອມ​ພິວ​ເຕີ​: First, plug the audio interface into your computer using the provided USB Type-C cable. Ensure your computer's USB port can supply power and transmit data normally. The interface supports USB 2.0 and USB 3.0.
2. Adjust Knobs: Adjust the three main input gain knobs to at least the middle position.
3. Activate Functions: Click the three function keys (likely for phantom power, direct monitor, and line/instrument selection) to ensure all desired functions are turned on.
4. ເຊື່ອມຕໍ່ໄມໂຄຣໂຟນ/ເຄື່ອງດົນຕີ: Plug in your XLR cable for microphones or 1/4-inch cables for instruments and headphone cable to begin your recording session.

Figure 2: ZUZONG 2i2 USB Audio Interface connected to a laptop, demonstrating cable connections.

ການຕິດຕັ້ງໄດເວີ

For optimal performance with certain Digital Audio Workstations (DAWs) like Cubase, Logic Pro, Reaper, Ableton Live, Studio One, and Audition, you may need to download and install the ASIO4ALL driver. This driver helps ensure low-latency audio performance.

ໝາຍເຫດ: Mac OS is not compatible with Pro Tools when using this interface.

ການ​ປະ​ຕິ​ບັດ​ການ​ໂຕ້​ຕອບ​

The ZUZONG 2i2 Audio Interface provides intuitive controls for managing your audio inputs and outputs.

Figure 3: Detailed diagram of the ZUZONG 2i2 USB Audio Interface's front and rear panels.

ການຄວບຄຸມການປ້ອນຂໍ້ມູນ

• Combo Inputs: The interface features two combo inputs (XLR/1/4-inch) that can accommodate both microphones and instruments.
• ປຸ່ມຮັບ: Each input has an independent gain knob to adjust the input level.
• ການປ່ຽນສາຍ/ເຄື່ອງມື: A switch allows you to toggle between line-level and instrument-level input, providing appropriate gain for guitars or other instruments.
• ພະລັງງານ 48V Phantom: Activate the 48V phantom power for condenser microphones. Ensure your USB input has adequate power to support this feature.
• ຕົວຊີ້ວັດຄລິບ: LED indicators next to each gain knob will light up if the input signal is clipping, indicating that the gain should be reduced.

ການຄວບຄຸມຜົນຜະລິດ

• ປຸ່ມປ້ອນຂໍ້ມູນ: Controls the overall output volume to your speakers or monitoring system.
• ປະລິມານຫູຟັງ: A dedicated knob controls the volume for the 1/4-inch headphone output.
• ຕິດຕາມກວດກາໂດຍກົງ: The Direct Monitor switch allows you to hear your input signal directly through your headphones with zero latency, bypassing your computer's processing.
• ຜົນໄດ້ຮັບເສັ້ນ: Two 1/4-inch TRS jack sockets (LEFT and RIGHT) are available for connecting to external mixers or studio monitors.

Figure 4: The audio interface integrated into a typical recording setup.

ບໍາລຸງຮັກສາ

To ensure the longevity and optimal performance of your ZUZONG 2i2 USB Audio Interface, follow these maintenance guidelines:

• ທໍາຄວາມສະອາດ: Use a soft, dry cloth to clean the exterior of the device. Avoid using abrasive cleaners, solvents, or waxes.
• ການເກັບຮັກສາ: ເກັບຮັກສາໜ້າຈໍໄວ້ໃນບ່ອນທີ່ເຢັນ, ແຫ້ງ ແລະ ຫ່າງຈາກແສງແດດໂດຍກົງ, ອຸນຫະພູມທີ່ຮຸນແຮງ ແລະ ຄວາມຊຸ່ມຊື່ນສູງ.
• ການຈັດການ: ຈັດການອຸປະກອນດ້ວຍຄວາມລະມັດລະວັງ. ຫຼີກ​ລ້ຽງ​ການ​ປະ​ຖິ້ມ​ມັນ​ຫຼື​ການ​ຮັບ​ຜົນ​ກະ​ທົບ​ທີ່​ເຂັ້ມ​ແຂງ​.
• ການເຊື່ອມຕໍ່: Periodically check all cable connections for wear and tear. Ensure cables are securely plugged in to prevent signal loss or damage.

ການແກ້ໄຂບັນຫາ

If you encounter issues with your ZUZONG 2i2 USB Audio Interface, refer to the following common problems and solutions:

• No Sound Output/Input:
  • Ensure all cables (USB, microphone, instrument, headphones) are securely connected.
  • Check the gain knobs on the interface and the volume controls on your computer/DAW.
  • Verify that the correct audio input/output device (ZUZONG 2i2 USB Audio Interface) is selected in your computer's sound settings and your Digital Audio Workstation (DAW).
  • If using condenser microphones, ensure 48V phantom power is activated.
• Device Not Recognized by Computer/DAW:
  • Try connecting the interface to a different USB port on your computer, preferably a direct port rather than a USB hub, to ensure sufficient power supply.
  • Restart your computer after connecting the device.
  • Ensure you have installed the necessary ASIO4ALL driver if required by your DAW (e.g., Cubase, Ableton Live).
  • ກວດເບິ່ງຕົວຈັດການອຸປະກອນຂອງຄອມພິວເຕີຂອງທ່ານ (Windows) ຫຼືຂໍ້ມູນລະບົບ (Mac) ເພື່ອເບິ່ງວ່າອຸປະກອນຢູ່ໃນລາຍການ.
• Audio Quality Issues (Noise, Distortion):
  • Reduce the input gain if the clip indicators are lighting up frequently.
  • Ensure you are using high-quality, shielded cables.
  • Check for ground loops or interference from other electronic devices.
• No DAW Recording Software Included:
  • This product does not include recording software. You will need to download a Digital Audio Workstation (DAW) separately. Popular options include Audacity (free), GarageBand (Mac), Ableton Live, Cubase, Logic Pro, or Reaper.

ຂໍ້ມູນຈໍາເພາະ

Figure 5: Dimensions of the ZUZONG 2i2 USB Audio Interface.

ການຮັບປະກັນ & ສະຫນັບສະຫນູນ

For specific warranty information and customer support, please refer to the documentation included with your product or visit the official ZUZONG webເວັບໄຊ. ນອກນັ້ນທ່ານຍັງສາມາດໄປຢ້ຽມຢາມໄດ້ ZUZONG Store on Amazon ສຳລັບຂໍ້ມູນຜະລິດຕະພັນເພີ່ມເຕີມ ແລະ ຕົວເລືອກການຕິດຕໍ່.