ຄູ່ມືການໃຊ້ກ້ອງວົງຈອນປິດ IROAD NX7

1. ບົດແນະນຳ

Thank you for choosing the IROAD NX7 Dash Cam. This manual provides detailed instructions for the installation, operation, and maintenance of your new dash camera. The IROAD NX7 is a high-performance 2-channel dash cam featuring Full HD 1080P recording for both front and rear cameras, a 3-inch touch panel display, 24-hour parking surveillance with motion and impact detection, and advanced driving assistance systems (ADAS).

2. ເນື້ອໃນຊຸດ

ກະລຸນາກວດເບິ່ງວ່າລາຍການທັງໝົດຕໍ່ໄປນີ້ແມ່ນລວມຢູ່ໃນຊຸດຂອງທ່ານ:

• IROAD NX7 Front Dash Cam Unit
• ກ້ອງຫຼັງ
• ສາຍເຊື່ອມຕໍ່ກ້ອງຫຼັງ
• OBDⅡ Power Cable (for general and hybrid vehicles)
• ກາດ MicroSD 16GB
• ຄູ່ມືຜູ້ໃຊ້ (ເອກະສານນີ້)
• Adhesive Mounts

3. ຜະລິດຕະພັນເກີນview

Familiarize yourself with the components and ports of your IROAD NX7 Dash Cam.

ຮູບທີ 3.1: The IROAD NX7 main dash cam unit and its accompanying rear camera, showcasing ການອອກແບບທີ່ຫນາແຫນ້ນຂອງພວກເຂົາ.

ຮູບທີ 3.2: IROAD NX7 Front and Rear Dash Cam with labeled components. The image shows the front camera with its lens, security LED, and operation LED. The rear camera is also shown. Various ports are labeled: DC-IN power terminal, GPS terminal, rear camera terminal, memory card slot, power switch, and bracket.

ຮູບທີ 3.3: ເທິງລົງລຸ່ມ view of the IROAD NX7 dash cam and its rear camera, highlighting their sleek design.

• ເລນກ້ອງຖ່າຍຮູບ: ບັນທຶກວິດີໂອ footage.
• LED ຄວາມປອດໄພ: Indicates security recording status.
• ປະຕິບັດການ LED: Indicates device operation status.
• ວົງເລັບ: Used for mounting the dash cam.
• DC-IN Power Terminal: ເຊື່ອມຕໍ່ກັບສາຍໄຟ.
• GPS Terminal: For connecting an external GPS module (if applicable).
• ຊ່ອງໃສ່ກາດຫນ່ວຍຄວາມຈໍາ: Insert the MicroSD card here.
• ສັບປ່ຽນພະລັງງານ: ເປີດ/ປິດອຸປະກອນ.
• Front Terminal: Connection point for the front camera (if separate).
• Rear Camera Terminal: Connects the rear camera.

4. ການຕິດຕັ້ງແລະການຕິດຕັ້ງ

4.1 ການກະກຽມກາດ MicroSD

1. Before first use, it is recommended to format the included 16GB MicroSD card using the IROAD PC Viewer software or directly on the device via the touch screen menu.
2. Insert the MicroSD card into the memory card slot until it clicks into place. Ensure the card is inserted correctly to avoid damage.

4.2 ການຕິດຕັ້ງ Dash Cam

The IROAD NX7 uses an adhesive mounting method for secure attachment.

1. Choose an optimal location on your windshield, typically behind the rearview ກະຈົກ, ຮັບປະກັນວ່າມັນບໍ່ໄດ້ຂັດຂວາງຂອງທ່ານ view.
2. Clean the chosen area on the windshield thoroughly to ensure strong adhesion.
3. Attach the adhesive mount to the dash cam bracket.
4. Peel off the protective film from the adhesive pad and firmly press the dash cam with the mount onto the cleaned windshield area for at least 30 seconds.
5. Repeat the process for the rear camera, mounting it on the rear windshield.

4.3 ການເຊື່ອມຕໍ່ພະລັງງານ

The IROAD NX7 comes with an OBDⅡ power cable for easy and reliable power supply.

1. Locate your vehicle's OBDⅡ port (usually under the dashboard on the driver's side).
2. Connect the OBDⅡ power cable to the OBDⅡ port.
3. Connect the other end of the OBDⅡ power cable to the DC-IN Power Terminal on the IROAD NX7 front dash cam.
4. Route the power cable neatly along the vehicle's interior trim to avoid interference with driving.
5. Connect the rear camera to the front unit using the provided rear camera connection cable.

5. ຄໍາແນະນໍາການດໍາເນີນງານ

5.1 ການເປີດ/ປິດ

• The dash cam will automatically power on and begin recording when your vehicle's ignition is turned on, provided it is connected via the OBDⅡ power cable.
• To manually power off, press and hold the Power Switch until the device shuts down.

5.2 Basic Recording Modes

The IROAD NX7 supports continuous recording, event recording, and parking surveillance recording.

• ບັນທຶກຢ່າງຕໍ່ເນື່ອງ: ເລີ່ມອັດຕະໂນມັດເມື່ອລົດເປີດຢູ່. Footage is recorded in 1-minute segments and saved to the MicroSD card.
• Event Recording (Impact Recording): In case of a sudden impact or collision, the G-sensor triggers an event recording, saving the footage separately to prevent overwriting.
• Loop Recording (Overwrite Recording): When the MicroSD card is full, the oldest continuous recording files are automatically overwritten to make space for new recordings. Event recordings are protected from overwriting.

5.3 ໂໝດເຝົ້າລະວັງບ່ອນຈອດລົດ

The IROAD NX7 offers 24-hour parking surveillance with advanced features:

• ກວດຈັບການເຄື່ອນໄຫວ: The dash cam detects motion around the vehicle and automatically records footage.
• ການກວດຫາຜົນກະທົບ: If an impact is detected while parked, the device records and saves the event footage.
• Time-lapse & Hyperlapse: For extended parking surveillance, the dash cam can record in time-lapse mode, compressing long periods into shorter videos, saving storage space.
• Battery Over-discharge Prevention: The dash cam monitors your vehicle's battery voltage and automatically cuts off power if the voltage drops below a set threshold, preventing battery drain.

5.4 Touch Panel Operation

The 3-inch touch panel allows for easy navigation and settings adjustment.

• Tap icons to access menus such as Live View, Playback, Settings, and File ການຄຸ້ມຄອງ.
• Swipe to navigate through recorded files.
• Adjust settings like recording resolution, G-sensor sensitivity, parking mode options, and time/date.

5.5 Advanced Driving Assistance Systems (ADAS)

The IROAD NX7 includes ADAS features to enhance driving safety:

• LDWS (ລະບົບເຕືອນການອອກເສັ້ນທາງ): ແຈ້ງເຕືອນທ່ານ ຖ້າລົດຂອງທ່ານອອກນອກເລນຂອງມັນ.
• FCWS (ລະບົບເຕືອນການຂັດກັນໄປຂ້າງໜ້າ): Warns you of an impending collision with a vehicle ahead.
• FVDW (Front Vehicle Departure Warning): Notifies you when the vehicle in front starts moving from a standstill.

Note: ADAS features are supplementary and should not replace safe driving practices.

ຄວາມເຂົ້າກັນໄດ້ຂອງໄຟສັນຍານ LED 5.6

The IROAD NX7 is designed to record clearly even when facing LED traffic signals, minimizing flicker and ensuring reliable footage.

6. ບໍາລຸງຮັກສາ

6.1 ການຈັດການບັດ MicroSD

• Regularly format the MicroSD card (at least once a month) to maintain optimal recording performance and prevent data corruption. This can be done via the dash cam's settings or the IROAD PC Viewເອີ.
• Use only high-quality, genuine MicroSD cards recommended by IROAD.
• Replace the MicroSD card every 6-12 months, depending on usage, as flash memory has a limited lifespan.

6.2 ການທໍາຄວາມສະອາດອຸປະກອນ

• Wipe the camera lenses and the device body with a soft, dry, lint-free cloth.
• Do not use chemical cleaners or abrasive materials, as they may damage the device.
• ໃຫ້ແນ່ໃຈວ່າອຸປະກອນຖືກປິດກ່ອນທີ່ຈະທໍາຄວາມສະອາດ.

7. ການແກ້ໄຂບັນຫາ

8. ຂໍ້ມູນຈໍາເພາະ

9. ການຮັບປະກັນແລະການສະຫນັບສະຫນູນ

For warranty information and technical support, please refer to the warranty card included with your product or visit the official IROAD webເວັບໄຊ. ຮັກສາໃບຮັບເງິນການຊື້ຂອງທ່ານໄວ້ເປັນຫຼັກຖານການຊື້ສໍາລັບການຮ້ອງຂໍການຮັບປະກັນ.

For further assistance, you may contact IROAD customer service through their official channels.