ຄູ່ມືການໃຊ້ກ້ອງວົງຈອນປິດ IROAD NX7

ແນະນຳ

This manual provides detailed instructions for the installation, operation, and maintenance of your IROAD NX7 Dash Cam. The IROAD NX7 is a high-performance 2-channel Full HD 1080P dash camera designed to record driving footage and provide parking surveillance. Please read this manual thoroughly before using the device to ensure proper functionality and safety.

ເນື້ອໃນຊຸດ

ກວດ​ສອບ​ວ່າ​ລາຍ​ການ​ທັງ​ຫມົດ​ແມ່ນ​ມີ​ຢູ່​ໃນ​ຊຸດ​:

• IROAD NX7 Main Unit (Front Camera)
• ກ້ອງຫຼັງ
• ສາຍເຊື່ອມຕໍ່ກ້ອງຫຼັງ
• OBD-II Power Cable (for general and hybrid vehicles)
• ກາດ MicroSD 16GB
• ຄູ່ມືຜູ້ໃຊ້ (ເອກະສານນີ້)
• Adhesive Mounts
• ສາຍສາກ
• GPS Antenna (optional add-on)

Image: IROAD NX7 Dash Cam main unit and rear camera, illustrating the primary components included in the package.

ສິນຄ້າເກີນview

ຄຸ້ນເຄີຍກັບອົງປະກອບແລະຫນ້າທີ່ຂອງມັນ.

Image: Detailed diagram showing the front camera (main unit) and rear camera with labeled parts such as camera lens, security LED, operation LED, bracket, DC-IN power terminal, GPS terminal, power switch, memory card slot, front terminal, and rear camera lens.

Main Unit (Front Camera)

• ເລນກ້ອງໜ້າ: Records the view through the front windshield.
• LED ຄວາມປອດໄພ: Indicates recording status and acts as a security deterrent.
• ປະຕິບັດການ LED: Shows the device's operational status.
• 3-inch Touch Panel Display: ສໍາລັບ viewກໍາລັງດໍາລົງຊີວິດ footage, playback, and accessing settings.
• ຊ່ອງສຽບກາດ MicroSD: Insert the provided MicroSD card for video storage.
• ສັບປ່ຽນພະລັງງານ: ເພື່ອເປີດຫຼືປິດອຸປະກອນ.
• DC-IN Power Terminal: ເຊື່ອມຕໍ່ກັບສາຍໄຟ.
• GPS Terminal: Connects to the optional GPS antenna for location and speed data.
• Rear Camera Terminal: Connects the rear camera cable.

ກ້ອງຫຼັງ

• ເລນກ້ອງຫຼັງ: Records the view through the rear windshield.
• ປະຕິບັດການ LED: Indicates the rear camera's operational status.

ຕັ້ງຄ່າ

1. ການໃສ່ກາດ MicroSD

1. ກວດໃຫ້ແນ່ໃຈວ່າກ້ອງຕິດປິດ.
2. Locate the MicroSD card slot on the side of the main unit.
3. Insert the provided 16GB MicroSD card into the slot until it clicks into place. Ensure the correct orientation.

2. Main Unit Installation (Front Camera)

1. Clean the area on your front windshield where you intend to mount the dash cam.
2. Attach the adhesive mount to the main unit.
3. ເອົາແຜ່ນປ້ອງກັນອອກຈາກບ່ອນຕິດກາວ.
4. Firmly press the dash cam onto the chosen spot on the windshield, ensuring a clear view of the road. Position it centrally, behind the rearview mirror if possible, to avoid obstructing your view.

3. ການຕິດຕັ້ງກ້ອງຫຼັງ

1. Clean the area on your rear windshield for the rear camera.
2. Attach the adhesive mount to the rear camera.
3. Remove the protective film and firmly press the rear camera onto the rear windshield, ensuring a clear view.
4. Connect the rear camera to the main unit using the provided rear camera connection cable. Route the cable neatly along the vehicle's headliner and pillars to conceal it.

4. Power Connection (OBD-II)

1. ຊອກຫາພອດ OBD-II ຂອງລົດຂອງທ່ານ (ໂດຍປົກກະຕິແລ້ວຈະຢູ່ໃຕ້ແຜງໜ້າປັດດ້ານຂ້າງຂອງຄົນຂັບ).
2. Connect the OBD-II power cable to the OBD-II port.
3. Connect the other end of the OBD-II power cable to the DC-IN power terminal on the main unit.
4. Route the power cable neatly to avoid interference with driving controls.

5. ການເຊື່ອມຕໍ່ເສົາອາກາດ GPS (ທາງເລືອກ)

1. If using the optional GPS antenna, connect it to the GPS terminal on the main unit.
2. ຕິດເສົາອາກາດ GPS ໃນສະຖານທີ່ທີ່ມີຄວາມຊັດເຈນ view ຂອງທ້ອງຟ້າ, ໂດຍປົກກະຕິຢູ່ໃນ dashboard ຫຼືຢູ່ໃກ້ກັບ windshield ໄດ້.

ຄໍາແນະນໍາການດໍາເນີນງານ

ເປີດ/ປິດ

• ເປີດ: Once connected to power, the dash cam will automatically power on when the vehicle's ignition is turned on.
• ປິດພະລັງງານ: The dash cam will automatically power off when the vehicle's ignition is turned off. You can also manually power off using the power switch.

ບັນທຶກວິທີ

The IROAD NX7 supports various recording modes:

• ບັນທຶກຢ່າງຕໍ່ເນື່ອງ: Automatically starts recording when the device powers on. Footage is saved in short segments and overwritten by new recordings once the MicroSD card is full (loop recording).
• Event Recording (Impact Recording): When an impact is detected by the G-sensor, the dash cam automatically saves the current footage ເປັນເຫດການ file, ປ້ອງກັນບໍ່ໃຫ້ມັນຖືກຂຽນທັບ.
• Parking Surveillance (24-hour Recording):
  • ກວດຈັບການເຄື່ອນໄຫວ: Records automatically when motion is detected around the vehicle while parked.
  • Impact Recording: ບັນທຶກເມື່ອກວດພົບການກະທົບໃນຂະນະທີ່ຈອດລົດ.

  Note: Parking surveillance requires a continuous power supply, typically provided by the OBD-II cable.

ແຕະການດໍາເນີນການກະດານ

The 3-inch touch panel allows for easy navigation and control:

• Tap icons to access menus, settings, and playback.
• Swipe to navigate through lists or video files.
• Adjust settings such as recording resolution, G-sensor sensitivity, and parking mode options.

Viewໃນການບັນທຶກ

• ຢູ່ໃນອຸປະກອນ: Access the playback menu on the touch screen to view recorded videos directly.
• On a Computer: Remove the MicroSD card from the dash cam and insert it into a computer's card reader. Use the dedicated IROAD PC Viewer software (available for download from the IROAD website) ເຖິງ view and manage recordings.

LED Signal Compatibility

The IROAD NX7 is designed to minimize flicker when recording LED traffic signals, ensuring clear capture of signal lights.

ບໍາລຸງຮັກສາ

ການຄຸ້ມຄອງບັດ MicroSD

• ການຈັດຮູບແບບປົກກະຕິ: It is recommended to format the MicroSD card regularly (e.g., once a month) to maintain optimal recording performance and prevent data corruption. This can usually be done through the dash cam's settings menu or via the PC Viewer ຊອບ​ແວ​.
• ອາຍຸບັດ: MicroSD cards have a limited lifespan due to continuous writing cycles. Replace the card if you experience frequent recording errors or data loss.

ການເຮັດຄວາມສະອາດອຸປະກອນ

• Use a soft, dry cloth to clean the dash cam's body and lenses.
• ຢ່າໃຊ້ເຄື່ອງເຮັດຄວາມສະອາດຂັດຫຼືສານລະລາຍ, ເພາະວ່າພວກມັນອາດຈະທໍາລາຍອຸປະກອນ.
• Ensure the lenses are clean and free of smudges for clear video quality.

ການແກ້ໄຂບັນຫາ

ຂໍ້ມູນຈໍາເພາະ

ການຮັບປະກັນແລະການສະຫນັບສະຫນູນ

Specific warranty information for the IROAD NX7 Dash Cam is typically provided with the product packaging or can be found on the official IROAD website. For technical support, troubleshooting assistance beyond this manual, or warranty claims, please refer to the contact information provided by your retailer or the IROAD official support channels.

Always ensure you are using official IROAD accessories and software for optimal performance and to maintain warranty validity.