ແນະນຳ
This manual provides detailed instructions for the setup, operation, maintenance, and troubleshooting of your VOLT PLUS TECH Wireless PRO Bluetooth 5.3 Earbuds, model MD06. Please read this guide thoroughly before using the product to ensure proper function and longevity.
ເນື້ອໃນຊຸດ
ກວດສອບວ່າລາຍການທັງຫມົດທີ່ລະບຸໄວ້ຂ້າງລຸ່ມນີ້ແມ່ນມີຢູ່ໃນຊຸດຜະລິດຕະພັນຂອງທ່ານ:
- VOLT PLUS TECH Wireless PRO Bluetooth 5.3 Earbuds (Left and Right)
- Charging Case with Digital Display
- ສາຍສາກ USB-C
- Multiple Sizes of Earbud Tips (Small, Large)
- ຄູ່ມືຜູ້ໃຊ້
ຮູບທີ 1: ເນື້ອໃນຊຸດ
ຕັ້ງຄ່າ
1. ການສາກໄຟເບື້ອງຕົ້ນ
Before first use, fully charge the earbuds and the charging case. Connect the USB-C charging cable to the charging case and a power source. The LED display on the case will indicate the charging status and battery level.
ຮູບທີ 2: ຫູຟັງໃນກ່ອງສາກໄຟພ້ອມຈໍສະແດງຜົນ LED
2. ການຈັບຄູ່ກັບອຸປະກອນ
- Remove both earbuds from the charging case. A blue light will indicate that they are automatically turned on. Alternatively, press and hold the touch area on each earbud for 3 seconds until a blue indicator light flashes.
- ເປີດໃຊ້ Bluetooth ໃນອຸປະກອນມືຖືຂອງທ່ານ.
- ຊອກຫາ "F9" in the list of available Bluetooth devices.
- Select "F9" to pair and connect. Once connected, the earbuds are ready for use.
3. How to Re-Sync Earbuds
If your earbuds become unpaired from each other or only one earbud connects, follow these steps to re-sync them:
- Hold the Left (L) earbud in your left hand and the Right (R) earbud in your right hand for distinction.
- Turn on both earbuds. Press and hold the touch area on both earbuds simultaneously for 10 seconds.
- The LED indicators will flash red/blue. After 10 seconds, they will flash only blue. Release the touch areas.
- Quickly tap the Right earbud's touch area 2 times. The earbuds will continue blinking until one earbud turns off. This is normal; the other earbud will continue flashing red/blue.
- Go to your device's Bluetooth settings. "F9" or "Headset" should now appear only once. If it still appears twice, repeat steps 2 and 3.
- Connect your earbuds. Both should now be fully paired and function together.
ຄໍາແນະນໍາການດໍາເນີນງານ
ແຕະການຄວບຄຸມ
The earbuds feature smart touch controls for various functions:
- Press Once (L/R): ຮັບສາຍ/ວາງສາຍ, ຫຼິ້ນ/ຢຸດເພງ.
- ກົດຍາວ (R): Increase Volume (+).
- ກົດຍາວ (L): Decrease Volume (-).
- Press Twice (R): Skip to Next Song.
- Press Twice (L): Skip to Previous Song.
- Press Thrice (L/R): Activate Voice Assistant (Siri/Android Mic).
ຮູບທີ 3: ຟັງຊັນຄວບຄຸມການສໍາພັດອັດສະລິຍະ
ການທໍາງານຂອງ Power Bank
The charging case is equipped with a 2000mAh battery, allowing it to function as a portable power bank. You can use the case to recharge your earbuds multiple times or provide emergency power to your mobile phone via the USB-C port.
- Provides up to 8 charges for the earbuds, offering 36 hours of total playback.
- Can recharge a mobile phone approximately 2 times.
Figure 4: Charging Case as a Portable Power Bank
ຈໍສະແດງຜົນດິຈິຕອນ LED
The charging case features a clear LED digital display that shows the accurate power level of the charging box and each earbud. This allows for efficient power management and ensures you are aware of the remaining battery life.
ບໍາລຸງຮັກສາ
ທໍາຄວາມສະອາດ
Regularly clean your earbuds and charging case to maintain optimal performance and hygiene:
- ໃຊ້ຜ້າແພທີ່ອ່ອນ, ແຫ້ງ, ບໍ່ມີເສັ້ນດ່າງເພື່ອເຊັດຫູຟັງຫູຟັງ ແລະ ກ່ອງສາກ.
- ສໍາລັບຝຸ່ນ stubborn, ເລັກນ້ອຍ dampໃສ່ຜ້າດ້ວຍນ້ໍາຫຼືຢາເຮັດຄວາມສະອາດອ່ອນໆ, ບໍ່ມີສານຂັດ.
- Do not use harsh chemicals, aerosols, or abrasive cleaning agents.
- ກວດໃຫ້ແນ່ໃຈວ່າລາຍຊື່ຜູ້ຕິດຕໍ່ທີ່ສາກໄຟຢູ່ທັງຫູຟັງເອຍບັດ ແລະເຄສແມ່ນສະອາດ ແລະແຫ້ງ.
ການເກັບຮັກສາ
ເມື່ອບໍ່ໄດ້ໃຊ້, ໃຫ້ເກັບຮັກສາຫູຟັງເອຍບັດໃສ່ໃນກະເປົ໋າສາກໄຟເພື່ອປົກປ້ອງພວກມັນຈາກຂີ້ຝຸ່ນ, ຄວາມເສຍຫາຍ, ແລະເພື່ອຮັກສາສາຍສາກ.
ກັນນໍ້າ (IPX4)
The earbuds are rated IPX4 water-resistant, meaning they are protected from splashing water from any direction. This makes them suitable for sports and exercise, and can withstand sweat and light rain. They are not designed for submersion in water.
ຮູບທີ 5: ການກັນນ້ໍາ IPX4
ການແກ້ໄຂບັນຫາ
ຖ້າທ່ານພົບບັນຫາກັບຫູຟັງເອຍບັດຂອງທ່ານ, ກະລຸນາອ້າງອີງເຖິງວິທີແກ້ໄຂທົ່ວໄປຕໍ່ໄປນີ້:
- ຫູຟັງບໍ່ເປີດ: ກວດໃຫ້ແນ່ໃຈວ່າຫູຟັງຫູຟັງ ແລະກ່ອງສາກສາກເຕັມແລ້ວ.
- ເຊື່ອມຕໍ່ຫູຟັງຫູຟັງອັນດຽວເທົ່ານັ້ນ: Follow the "How to Re-Sync Earbuds" instructions in the Setup section.
- ຫູຟັງບໍ່ຈັບຄູ່: Make sure Bluetooth is enabled on your device and the earbuds are in pairing mode. Try forgetting "F9" from your device's Bluetooth list and re-pairing.
- ບໍ່ມີສຽງ: Check the volume level on both your device and the earbuds. Ensure earbuds are properly connected.
- ຄຸນະພາບສຽງບໍ່ດີ: Ensure earbuds are clean and properly seated in your ears. Move closer to your connected device to avoid interference.
- ບັນຫາການສາກໄຟ: Verify the USB-C cable is securely connected to both the case and the power source. Clean the charging contacts on the earbuds and inside the case.
ຂໍ້ມູນຈໍາເພາະ
| ຄຸນສົມບັດ | ຂໍ້ມູນຈໍາເພາະ |
|---|---|
| ຊື່ຕົວແບບ | MD06 |
| ຍີ່ຫໍ້ | VOLT PLUS TECH |
| ເຕັກໂນໂລຊີການເຊື່ອມຕໍ່ | Bluetooth 5.3 |
| ການຄວບຄຸມສິ່ງລົບກວນ | ການຕັດສຽງລົບກວນແບບ Active (CVC 8.0) |
| ລະດັບຄວາມຕ້ານທານນ້ໍາ | IPX4 (ກັນນໍ້າ) |
| ຊີວິດຫມໍ້ໄຟ | ດົນເຖິງ 36 ຊົ່ວໂມງ (ພ້ອມກ່ອງສາກ) |
| ຄວາມອາດສາມາດສາກໄຟໄດ້ | 2000mAh |
| Jack ຫູຟັງ | USB-C |
| ວິທີການຄວບຄຸມ | ແຕະ |
| ອຸປະກອນທີ່ເຂົ້າກັນໄດ້ | Core Innovations CRTB7001 and other Bluetooth-enabled devices |
| ນ້ໍາຫນັກລາຍການ | 4 ອອນ |
| ຂະໜາດສິນຄ້າ | 1.5 x 1 x 1.5 ນິ້ວ |
Figure 6: Earbud Internal Components (Bluetooth Chip)
Figure 7: VOLT PLUS TECH Wireless PRO Bluetooth 5.3 Earbuds
ຂໍ້ມູນການຮັບປະກັນ
This product comes with a standard manufacturer's warranty. For specific details regarding warranty coverage, duration, and terms, please refer to the warranty card included in your package or contact the manufacturer directly.
ສະຫນັບສະຫນູນ
For further assistance, technical support, or inquiries not covered in this manual, please contact VOLT PLUS TECH customer service. Contact information can typically be found on the product packaging, the manufacturer's official webເວັບໄຊທ໌, ຫຼືຜ່ານຮ້ານຂາຍຍ່ອຍຂອງທ່ານ.
