Universal Audio UAFX Golden Reverb Pedal Instruction Manual

1. ບົດແນະນຳ

The Universal Audio UAFX Golden Reverb Pedal delivers classic reverb effects, including Spring, Plate, and Vintage Digital. This pedal offers Live/Preset footswitch modes and selectable true or buffered/trails bypass via the UAFX Control app. This manual provides detailed instructions for setting up, operating, and maintaining your UAFX Golden Reverb Pedal.

2. ສິ່ງທີ່ຢູ່ໃນກ່ອງ

• UAFX Golden Reverberator Pedal
• UAFX Control app (download required)

3. ຜະລິດຕະພັນເກີນview

3.1. ການຄວບຄຸມແລະຕົວຊີ້ວັດ

The UAFX Golden Reverb Pedal features intuitive controls for shaping your reverb sound. Familiarize yourself with the layout below.

ຮູບພາບ 1: ເທິງ view of the UAFX Golden Reverb Pedal, highlighting the Decay, Predelay, Mix, Bass, Treble, and Mod knobs, along with the Effect Type, Store, and A/B/C switches, and the ON and PRESET footswitches.

• ບິດ DECAY: ປັບຄວາມຍາວຂອງຫາງ reverb ໄດ້.
• PREDELAY Knob: Controls the time before the reverb effect begins.
• ປຸ່ມປະສົມ: Sets the balance between the dry (unaffected) and wet (effected) signal.
• ບິດເບສ: Adjusts the low-frequency content of the reverb.
• ລູກບິດ TREBLE: Adjusts the high-frequency content of the reverb.
• ປຸ່ມ MOD: Controls the amount of modulation applied to the reverb tail.
• EFFECT TYPE Switch: Selects between Spring '65, Plate 140, and Hall 224 reverb algorithms.
• STORE Switch: Used to save custom settings as presets.
• ສະວິດ A/B/C: Selects different variations or modes within each effect type.
• ເປີດສະວິດຕີນ: ປິດ/ເປີດເອັບເຟັກ.
• PreSET ສະວິດຕີນ: Recalls saved presets.

3.2. ການເຊື່ອມຕໍ່

The rear panel provides all necessary audio and power connections.

ຮູບພາບ 2: Rear panel connections of the UAFX Golden Reverb Pedal, including 1/MONO and 2/STEREO input/output jacks, 9VDC power input, USB-C port, and PAIR button.

• 1/MONO IN: Main audio input. Use for mono signal.
• 2/STEREO IN: ການປ້ອນຂໍ້ມູນສຽງທີສອງສໍາລັບການດໍາເນີນການສະເຕີລິໂອ.
• 1/MONO OUT: Main audio output. Use for mono signal.
• 2/STEREO OUT: ຜົນຜະລິດສຽງທີສອງສໍາລັບການດໍາເນີນການ stereo.
• 9VDC: Power input for connecting a 9V DC power supply (400mA minimum, center-negative).
• USB-C: For firmware updates and connection to the UAFX Control app.
• ປຸ່ມຄູ່: Used for Bluetooth pairing with the UAFX Control app.

4. ຕັ້ງຄ່າ

1. ການເຊື່ອມຕໍ່ພະລັງງານ: Connect a 9V DC power supply (center-negative, 400mA minimum) to the 9VDC input.
2. ການເຊື່ອມຕໍ່ສຽງ:
   • ສໍາລັບ ໂມໂນ operation, connect your instrument to the 1/MONO IN jack ແລະຂອງທ່ານ amplifier/interface to the 1/MONO OUT jack.
   • ສໍາລັບ ສະເຕຣິໂອ operation, connect your instrument/stereo source to both 1/MONO IN ແລະ 2/STEREO IN jacks, and your stereo amplifier/interface to both 1/MONO OUT ແລະ 2/STEREO OUT jacks.
3. ການເປີດເຄື່ອງເບື້ອງຕົ້ນ: The pedal will power on automatically when connected to power. The ON LED will illuminate.
4. UAFX Control App: Download the UAFX Control app from your device's app store. Use the USB-C port for initial registration and firmware updates. Use the PAIR button for Bluetooth connection to manage settings and access additional features.

ຮູບພາບ 3: The UAFX Golden Reverb Pedal integrated into a guitar pedalboard setup, demonstrating typical connections to other effects and an ampມີຊີວິດຊີວາ.

5. ຄໍາແນະນໍາການດໍາເນີນງານ

5.1. Selecting Reverb Modes

ໃຊ້ ປະເພດຜົນກະທົບ toggle switch to select one of the three primary reverb algorithms:

• Spring '65: Emulates the classic spring reverb tanks found in vintage 1960s American guitar ampຜູ້ຊ່ວຍຊີວິດ.
• Plate 140: Recreates the dense, smooth sound of German studio plate reverbs from the 1950s.
• Hall 224: Provides the rich, expansive sound of vintage digital hall reverbs from the late 1970s.

Further variations within each effect type can be accessed using the A / B / C toggle switch. For example, the Spring '65 mode offers different spring tank configurations, while Plate 140 and Hall 224 offer distinct plate and hall characteristics respectively. Additional vintage digital Chamber & Plate effects can be downloaded upon product registration via the UAFX Control app.

5.2. Adjusting Reverb Parameters

ປັບ ເສື່ອມໂຊມ, ລ່ວງໜ້າ, ແລະ ປະສົມ knobs to fine-tune the reverb's characteristics. The ເບສ ແລະ ຄວບຄຸມ knobs allow for equalization of the reverb tail, while the MOD knob introduces subtle modulation for added texture.

ຮູບພາບ 4: ລະອຽດ view of the control knobs and switches on the UAFX Golden Reverb Pedal, showing settings for Decay, Predelay, Mix, Bass, Treble, and Mod.

5.3. Live/Preset Modes and Bypass

• ໂໝດສົດ: When the PRESET LED is off, the pedal operates in Live mode, reflecting the current physical knob settings.
• ໂຫມດຕັ້ງຄ່າ: To save a preset, adjust the controls to your desired sound, then press and hold the ເກັບຮັກສາ switch until the PRESET LED flashes. To recall a preset, press the ຕັ້ງໄວ້ລ່ວງໜ້າ ສັດປີກ.
• ໂໝດຂ້າມ: The pedal supports both true bypass and buffered bypass with trails. This setting can be configured via the UAFX Control app. True bypass completely removes the pedal from the signal path when off, while buffered bypass allows the reverb tail to naturally decay after the effect is disengaged.

6. ບໍາລຸງຮັກສາ

• ທໍາຄວາມສະອາດ: ໃຊ້ຜ້າປຽກແຫ້ງເພື່ອເຮັດຄວາມສະອາດດ້ານນອກຂອງ pedal. ຫຼີກລ້ຽງການເຮັດຄວາມສະອາດຂັດຫຼືສານລະລາຍ.
• ການອັບເດດເຟີມແວ: Periodically check the Universal Audio website or the UAFX Control app for firmware updates to ensure optimal performance and access to new features. Updates are typically performed via the USB-C connection.
• ການເກັບຮັກສາ: ເກັບຮັກສາຄັນເລັ່ງໄວ້ໃນບ່ອນທີ່ເຢັນ, ແຫ້ງ ແລະ ຫ່າງຈາກແສງແດດໂດຍກົງ ແລະ ອຸນຫະພູມສູງສຸດເມື່ອບໍ່ໄດ້ໃຊ້ງານ.

7. ການແກ້ໄຂບັນຫາ

• ບໍ່ມີສຽງ:
  • Ensure the power supply is correctly connected and providing 9V DC (center-negative).
  • ກວດສອບສາຍສຽງທັງໝົດສຳລັບການເຊື່ອມຕໍ່ທີ່ເໝາະສົມ ແລະ ຄວາມສົມບູນ.
  • Verify the ON footswitch is engaged (ON LED illuminated).
• Unexpected Sound/Noise:
  • Check knob settings, especially MIX, DECAY, and MOD.
  • Ensure proper grounding of your audio equipment to avoid hum or buzz.
  • Test with different cables and power supplies to rule out faulty accessories.
• UAFX Control App Connectivity Issues:
  • ໃຫ້​ແນ່​ໃຈວ່​າ Bluetooth ຖືກ​ເປີດ​ໃຊ້​ງານ​ຢູ່​ໃນ​ອຸ​ປະ​ກອນ​ມື​ຖື​ຂອງ​ທ່ານ​.
  • Press the PAIR button on the pedal to initiate pairing mode.
  • For initial setup or persistent issues, connect the pedal via USB-C to a computer and use the desktop UAFX Control software.

8. ຂໍ້ມູນຈໍາເພາະ

9. ການຮັບປະກັນແລະການສະຫນັບສະຫນູນ

For warranty information, technical support, and additional resources, please visit the official Universal Audio website or contact their customer service. Ensure your product is registered to receive updates and support.

The UAFX Control app provides a convenient way to manage your pedal's settings, update firmware, and access exclusive features. It is available for both iOS and Android devices.

ຊັບພະຍາກອນອອນໄລນ໌: Universal Audio Official Webເວັບໄຊ