Montech X3 Mesh PC Gaming Case User Manual

1. ຜະລິດຕະພັນເກີນview

The Montech X3 Mesh is an ATX Mid-Tower PC Gaming Case designed for high airflow and visual appeal. It comes equipped with six pre-installed fixed RGB lighting fans (3x 140mm in the front, 2x 120mm on top, and 1x 120mm in the rear) to optimize cooling and provide vibrant illumination. The case features a unique door-open tempered glass side panel for easy access and a full panoramic view ຂອງ​ອົງ​ປະ​ກອບ​ພາຍ​ໃນ​ຂອງ​ທ່ານ​.

Figure 1: Montech X3 Mesh PC Gaming Case (Black)

2. ຄູ່ມືການຕິດຕັ້ງ

2.1 Unboxing ແລະ Initial Inspection

Carefully remove the case from its packaging. Inspect for any signs of damage during transit. Ensure all accessories, including screws and cable ties, are present.

2.2 ການຕິດຕັ້ງອົງປະກອບ

The Montech X3 Mesh supports ATX, Micro-ATX, and Mini-ITX motherboards. It offers ample space for CPU coolers up to 160mm high and GPUs up to 305mm long.

Figure 2: Internal Component Clearance

2.2.1 ການຕິດຕັ້ງເມນບອດ

1. Open the tempered glass side panel by gently pulling the fabric tab.
2. ຕິດຕັ້ງແຜ່ນປ້ອງກັນ I/O ເຂົ້າໄປໃນຊ່ອງຕັດຂອງເມນບອດທີ່ຢູ່ດ້ານຫຼັງຂອງເຄສ.
3. Align your motherboard with the standoffs inside the case and secure it with screws.

2.2.2 ການຕິດຕັ້ງຫນ່ວຍບໍລິການພະລັງງານ (PSU).

The PSU is mounted at the rear bottom of the case. The case supports PSUs up to 160mm in length.

1. Slide the PSU into its designated compartment from the rear of the case.
2. Secure the PSU with screws from the outside.

2.2.3 ການຕິດຕັ້ງ Drive Storage

The case provides bays for 2x 2.5" SSDs behind the motherboard tray and 2x 3.5" HDDs (or 2x 2.5" SSDs) in a removable cage below the PSU shroud.

Figure 3: Drive Bay Locations

1. For 2.5" SSDs, mount them directly onto the SSD brackets behind the motherboard tray.
2. For 3.5" HDDs, slide them into the drive cage located under the PSU shroud and secure. The drive cage is removable for easier installation or to create more space.

2.2.4 ການຕິດຕັ້ງບັດກາຟິກ (GPU).

Install your graphics card into the appropriate PCIe slot on your motherboard and secure it with the provided screws.

2.3 ການຈັດການສາຍ

The Montech X3 Mesh offers dedicated cutouts and tie-down points behind the motherboard tray for efficient cable routing, ensuring a clean build and improved airflow.

Figure 4: Smart Cable Management Features

3. ຄໍາແນະນໍາການດໍາເນີນງານ

3.1 ການເປີດເຄື່ອງ

Connect your power cable to the PSU and press the power button located on the top I/O panel.

Figure 5: Top I/O Panel

3.2 ການຄວບຄຸມແສງ RGB

The X3 Mesh features fixed RGB lighting fans. To turn the fan lighting on or off, simply press the dedicated LED button on the top I/O panel. Note that the lighting is fixed and not addressable.

Video 1: Demonstration of RGB Lighting Fans

This video showcases the fixed RGB lighting of the fans within the Montech X3 Mesh case, highlighting their visual effect when powered on.

3.3 ການໄຫຼວຽນຂອງອາກາດ ແລະ ຄວາມເຢັນ

The case is designed for high airflow, with triple 140mm fans in the front providing massive air intake and pre-mounted fans at the top and rear for optimal exhaust. This configuration helps maintain low temperatures for your components.

Figure 6: Optimized Airflow Design

4. ບໍາລຸງຮັກສາ

4.1 ການເຮັດຄວາມສະອາດຕົວກອງຝຸ່ນ

The Montech X3 Mesh includes a magnetic dust filter on the top panel and a washable dust filter for the PSU intake at the bottom. Regularly clean these filters to prevent dust buildup and maintain optimal airflow.

1. Gently remove the magnetic dust filter from the top panel.
2. Slide out the PSU dust filter from the bottom of the case.
3. Clean the filters using compressed air or by washing them with water (ensure they are completely dry before re-installation).

4.2 ການທໍາຄວາມສະອາດທົ່ວໄປ

Use a soft, dry cloth to wipe down the exterior of the case, including the tempered glass panel. For stubborn smudges on the glass, a glass cleaner can be used sparingly on the cloth, not directly on the panel.

5. ການແກ້ໄຂບັນຫາ

5.1 Fans Not Spinning / RGB Not Lighting Up

• Ensure all fan Molex connectors are securely connected to your power supply. The pre-installed fans are daisy-chained, so check the connection to the last fan in the chain.
• Verify that the LED button on the top I/O panel is pressed to activate the RGB lighting.
• Check the power supply connections to the fan hub (if applicable) and the motherboard.

5.2 Poor Airflow / High Temperatures

• Clean all dust filters as described in Section 4.1.
• Ensure proper cable management to avoid obstructing airflow paths inside the case.
• Verify that all fans are spinning correctly.

6. ຂໍ້ກໍານົດດ້ານວິຊາການ

7. ການຮັບປະກັນແລະການສະຫນັບສະຫນູນ

For warranty information, technical support, or to inquire about replacement parts, please refer to the official Montech webເວັບໄຊ ຫຼືຕິດຕໍ່ບໍລິການລູກຄ້າຂອງເຂົາເຈົ້າໂດຍກົງ. ຮັກສາໃບຮັບເງິນການຊື້ຂອງທ່ານໄວ້ເປັນຫຼັກຖານການຊື້ສໍາລັບການຮ້ອງຂໍການຮັບປະກັນ.

Montech offers various protection plans for extended coverage. Please visit the product page on Amazon or Montech's official website for details on available plans.