1. ບົດແນະນຳ
The Sharkoon RGB SLIDER WT is a versatile mid-tower PC case designed for optimal functionality and aesthetic appeal. It features an integrated RGB LED strip on the front panel, offering customizable lighting effects. The case supports various component configurations, including multiple cooling fan options and extensive storage capabilities. A tempered glass side panel provides a clear view ຂອງອົງປະກອບພາຍໃນ.

ຮູບພາບ 1.1: ດ້ານໜ້າ view of the Sharkoon RGB SLIDER WT PC Case, showcasing the RGB LED strip and tempered glass side panel.
2. ເນື້ອໃນຊຸດ
ກະລຸນາກວດສອບວ່າລາຍການທັງໝົດມີຢູ່ໃນຊຸດ:
- Sharkoon RGB SLIDER WT PC Case
- 1x 120mm Rear Fan (pre-installed)
- Accessory Box (containing screws, cable ties, and this manual)
3. ຂໍ້ມູນຈໍາເພາະ
| ຄຸນສົມບັດ | ລາຍລະອຽດ |
|---|---|
| ຂະໜາດ (L x W x H) | 40 x 19 x 45.6 cm |
| ນ້ຳໜັກ | 6 ກິໂລ |
| ປະເພດກໍລະນີ | ຫໍ Midi |
| ວັດສະດຸກະດານຂ້າງ | ແກ້ວ Tempered |
| ວິທີການເຮັດຄວາມເຢັນ | ການລະບາຍອາກາດ |
| ທ່າເຮືອທາງ ໜ້າ I / O | 2x USB 3.0, 1x USB 2.0, Audio In/Out |
| ຂັບລົດ Bays | 2x 3.5" HDD, 5x 2.5" SSD (2 shared with 3.5") |
| ຄວາມຍາວສູງສຸດຂອງ GPU | 335mm (without front fans) |
| ຄວາມສູງຂອງ CPU Cooler ສູງສຸດ | 157ມມ |
| ຄວາມຍາວ PSU ສູງສຸດ | 175ມມ |
| ພັດລົມທີ່ຕິດຕັ້ງໄວ້ລ່ວງໜ້າ | 1x 120mm Rear Fan |
| ສະຫນັບສະຫນູນແຟນ (ດ້ານຫນ້າ) | 3x 120ມມ |
| ສະຫນັບສະຫນູນແຟນໆ (ທາງເທິງ) | 2x 120mm or 2x 140mm |
| ຮອງຮັບພັດລົມ (ດ້ານຫຼັງ) | 1x 120ມມ |

Image 3.1: Diagram illustrating the dimensions of the Sharkoon RGB SLIDER WT PC Case.
4. ການຕິດຕັ້ງແລະການຕິດຕັ້ງ
4.1. ການກະກຽມ
Before beginning installation, ensure the PC case is placed on a stable, flat surface. Unpack all components and verify against the package contents list. It is recommended to wear an anti-static wrist strap to prevent damage to sensitive electronic components.
4.2. ການຕິດຕັ້ງເມນບອດ
- Install the I/O shield into the designated slot at the rear of the case.
- Align the motherboard with the standoffs inside the case. Ensure the I/O ports align with the I/O shield.
- Secure the motherboard using the provided screws.

ຮູບພາບ 4.1: ພາຍໃນ view of the PC case, showing the motherboard mounting area and pre-installed rear fan.
4.3. ການຕິດຕັ້ງຫນ່ວຍບໍລິການສະຫນອງພະລັງງານ (PSU).
- Locate the PSU tunnel at the bottom rear of the case.
- Slide the PSU into the tunnel from the rear of the case, ensuring the fan faces downwards (if applicable, for bottom intake).
- ຮັບປະກັນ PSU ດ້ວຍ screws ຈາກດ້ານຫລັງຂອງກໍລະນີ.
4.4. ການຕິດຕັ້ງອຸປະກອນການເກັບຮັກສາ
The case supports 3.5" HDDs and 2.5" SSDs.
- ຮາດດິດ 3.5": Install into the drive cage located within the PSU tunnel.
- 2.5" SSDs: Mount onto the dedicated SSD trays behind the motherboard tray or on top of the PSU tunnel.

ຮູບພາບ 4.2: ພາຍໃນດ້ານຫຼັງ view, highlighting cable management options and locations for 2.5" SSDs and 3.5" HDD cage.
4.5. Expansion Card Installation (e.g., GPU)
- ເອົາຊ່ອງສຽບ PCIe ທີ່ຈໍາເປັນອອກຈາກດ້ານຫລັງຂອງກໍລະນີ.
- Insert the expansion card into the corresponding PCIe slot on the motherboard.
- ຮັດບັດໃຫ້ແໜ້ນດ້ວຍສະກູ.
4.6. Fan Installation (Optional)
Additional fans can be installed at the front and top of the case.
- ພັດລົມທາງຫນ້າ: Remove the front panel to access the mounting points for up to three 120mm fans.
- ແຟນຍອດນິຍົມ: Mount up to two 120mm or 140mm fans to the top panel.
4.7. ການຄຸ້ມຄອງສາຍໄຟ
Utilize the cutouts and tie-down points behind the motherboard tray to route and secure cables. This improves airflow and maintains a clean interior aesthetic.
5. ຄໍາແນະນໍາການດໍາເນີນງານ
5.1. ເປີດເຄື່ອງ
After all components are installed and cables connected, close the side panels. Connect the power cable to the PSU and a wall outlet. Press the power button on the top panel of the case to start your system.

ຮູບພາບ 5.1: ທາງເທິງ view of the case, detailing the front I/O panel with USB ports and audio jacks.
5.2. ການຄວບຄຸມໄຟ RGB
The front RGB LED strip can be controlled in two ways:
- ຕົວຄວບຄຸມໃນຕົວ: Use the dedicated RGB control button on the top panel to cycle through 14 preset lighting modes.
- Motherboard ARGB Sync: Connect the RGB cable from the case to a compatible 3-pin 5V ARGB header on your motherboard. The lighting can then be controlled via motherboard software (e.g., Asus Aura Sync, MSI Mystic Light Sync, Gigabyte Fusion, ASRock Polychrome SYNC).
5.3. ພອດແຜງດ້ານໜ້າ
The front I/O panel provides convenient access to:
- 2x USB 3.0 ports for high-speed data transfer.
- 1x USB 2.0 port for general peripherals.
- Audio In (microphone) and Audio Out (headphone) jacks.
6. ບໍາລຸງຮັກສາ
6.1. ທໍາຄວາມສະອາດ
- ພາຍນອກ: ເຊັດພື້ນຜິວພາຍນອກດ້ວຍຜ້າອ່ອນໆ, ງamp ຜ້າ. ຫຼີກລ້ຽງການເຮັດຄວາມສະອາດຂັດ.
- ການກັ່ນຕອງຂີ້ຝຸ່ນ: Regularly remove and clean the dust filters (e.g., top magnetic filter, bottom PSU filter) to maintain optimal airflow and prevent dust buildup inside the case.
- ພາຍໃນ: Use compressed air to remove dust from internal components and fan blades. Ensure the system is powered off and unplugged before cleaning the interior.
6.2. ກະແສລົມ
Ensure that the case has adequate clearance around it for proper airflow. Avoid blocking intake or exhaust vents. Regularly check fan operation to ensure they are spinning correctly.
7. ການແກ້ໄຂບັນຫາ
7.1. ລະບົບບໍ່ເປີດເຄື່ອງ
- Verify that the power cable is securely connected to both the PSU and the wall outlet.
- Ensure the PSU's power switch is in the 'ON' position.
- Check that the front panel power button cable is correctly connected to the motherboard's front panel header.
- Confirm all internal power connections (24-pin ATX, CPU power, GPU power) are secure.
7.2. Fans Not Spinning
- ກວດສອບການເຊື່ອມຕໍ່ພະລັງງານພັດລົມກັບແຜງວົງຈອນຫຼັກ ຫຼື ຕົວຄວບຄຸມພັດລົມ.
- Ensure fan headers are enabled in the motherboard BIOS/UEFI settings.
7.3. ແສງ RGB ບໍ່ເຮັດວຽກ
- If using the built-in controller, press the RGB button to cycle modes.
- If using motherboard sync, ensure the ARGB cable is correctly connected to a 3-pin 5V ARGB header (not 4-pin 12V RGB).
- Verify that the motherboard's RGB software is installed and configured correctly.
7.4. ພອດ USB/ສຽງຢູ່ແຜງດ້ານໜ້າບໍ່ເຮັດວຽກ
- Check that the USB 3.0, USB 2.0, and HD Audio cables from the front panel are securely connected to the corresponding headers on the motherboard.
- Ensure motherboard drivers are installed.
8. ການຮັບປະກັນແລະການສະຫນັບສະຫນູນ
Sharkoon products are manufactured to high-quality standards. For detailed warranty information, please refer to the warranty card included with your product or visit the official Sharkoon website. For technical support, product inquiries, or service requests, please contact Sharkoon customer support through their official channels.
For further assistance, please visit the official Sharkoon webເວັບໄຊ: www.sharkoon.com





