ແນະນຳ
This manual provides essential information for the safe and efficient operation, assembly, maintenance, and troubleshooting of your Kobalt 24 Volt -12in String Trimmer. Please read this manual thoroughly before using the product and retain it for future reference.
ຄໍາແນະນໍາຄວາມປອດໄພທີ່ສໍາຄັນ
ປະຕິບັດຕາມຄໍາແນະນໍາດ້ານຄວາມປອດໄພເຫຼົ່ານີ້ສະເໝີເພື່ອປ້ອງກັນການບາດເຈັບ ຫຼື ຄວາມເສຍຫາຍ:
- ໃສ່ເຄື່ອງປ້ອງກັນຕາ. Always use safety glasses or goggles that comply with applicable standards when operating the string trimmer.
- ຮັກສາຜູ້ຢືນຢູ່ຫ່າງໄກ. Ensure that all persons and pets are at a safe distance (at least 50 feet) from the operating area.
- Do not touch the cutting area while in operation. The trimmer line rotates at high speed and can cause severe injury. Always wait for the line to stop completely before inspecting or clearing debris.
- Inspect the work area for objects that could be thrown or entangled in the cutting line.
- ຢ່າໃຊ້ເຄື່ອງຕັດຫຍ້າໃນສະພາບທີ່ປຽກ ຫຼື ໃນເວລາທີ່ມີຂອງແຫຼວໄວໄຟ ຫຼື ອາຍແກັສ.
- Ensure the battery pack is fully charged before use and removed when not in use or during maintenance.
ສິນຄ້າເກີນview
The Kobalt 24 Volt -12in String Trimmer is a cordless, battery-powered tool designed for trimming and edging grass and weeds. Its lightweight design and 12-inch cutting width make it suitable for various lawn care tasks.
ຮູບທີ 1: ເຕັມ view of the Kobalt 24 Volt -12in String Trimmer. This image shows the complete assembly of the trimmer, including the motor head, shaft, auxiliary handle, and battery housing at the top.
ເນື້ອໃນຊຸດ
ກວດສອບວ່າລາຍການທັງຫມົດແມ່ນມີຢູ່ໃນການ unboxing:
- Kobalt 24 Volt -12in String Trimmer Unit
- ມືຈັບຕົວຊ່ວຍ
- ກອງປະຊຸມກອງ
- ຄູ່ມືເຈົ້າຂອງ
Note: Battery and charger are not included with this model and must be purchased separately. Ensure you use compatible Kobalt 24 Volt battery packs and chargers.
ການຕິດຕັ້ງແລະການປະກອບ
1. Attaching the Guard Assembly
- Align the guard assembly with the slots on the trimmer head.
- ຍູ້ແຜ່ນປ້ອງກັນໃຫ້ແໜ້ນຈົນກວ່າມັນຈະເຂົ້າທີ່. ຮັບປະກັນວ່າມັນຖືກມັດໄວ້ຢ່າງແໜ້ນໜາ.
2. Installing the Auxiliary Handle
- ຖອດລູກບິດຢູ່ມືຈັບຊ່ວຍ.
- Slide the handle onto the trimmer shaft to a comfortable operating position.
- ຂັນປຸ່ມໃຫ້ແໜ້ນເພື່ອຕິດດ້າມຈັບໃຫ້ຢູ່ກັບທີ່.
3. ການຕິດຕັ້ງຫມໍ້ໄຟ (ຂາຍຫມໍ້ໄຟແຍກຕ່າງຫາກ)
- ກວດໃຫ້ແນ່ໃຈວ່າປິດເຄື່ອງຕັດ.
- Align the ribs on the battery pack with the grooves in the trimmer's battery port.
- Slide the battery pack into the port until it locks securely.
- ເພື່ອເອົາອອກ, ກົດປຸ່ມປ່ອຍແບດເຕີລີ່ແລະເລື່ອນຫມໍ້ໄຟອອກ.
ຄໍາແນະນໍາການດໍາເນີນງານ
ກຳ ລັງເລີ່ມ Trimmer
- ກວດໃຫ້ແນ່ໃຈວ່າໄດ້ສາກແບັດເຕີຣີເຕັມ ແລະຕິດຕັ້ງຢ່າງປອດໄພ.
- ຖື trimmer ແຫນ້ນດ້ວຍມືທັງສອງ.
- Press the safety lock-out button, then squeeze the trigger switch to start the trimmer.
- Release the safety lock-out button once the trimmer starts.
Trimming and Edging
- ຕັດ: Hold the trimmer at a slight angle to the ground, allowing the tip of the line to do the cutting. Move the trimmer in a sweeping motion from side to side.
- ຂອບ: Rotate the trimmer head 90 degrees (if applicable to your model) or tilt the trimmer to use the line vertically along sidewalks or driveways.
- Maintain a steady pace and avoid forcing the trimmer into thick vegetation.
ຮູບທີ 2: ໃກ້ຊິດ view of the Kobalt 24 Volt -12in String Trimmer in operation, demonstrating its use for edging along a concrete path. The image highlights the cutting head and the protective guard.
Stopping the Trimmer
Release the trigger switch to stop the trimmer. The cutting line will stop rotating within a few seconds.
ບໍາລຸງຮັກສາ
ທໍາຄວາມສະອາດ
- ເອົາຊຸດແບັດເຕີຣີອອກກ່ອນທຳຄວາມສະອາດທຸກຄັ້ງ.
- ໃຊ້ໂຄສະນາamp cloth to wipe down the exterior of the trimmer. Do not use harsh chemicals or abrasive cleaners.
- Clear any grass clippings or debris from the guard and cutting head.
ການປ່ຽນສາຍ Trimmer
Refer to your specific model's instructions for detailed steps on replacing the trimmer line. Generally, this involves:
- ເອົາແບັດເຕີຣີອອກ.
- Remove the spool cap and old line.
- Wind new line onto the spool according to the directional arrows.
- Reassemble the spool and cap.
ການແກ້ໄຂບັນຫາ
| ບັນຫາ | ສາເຫດທີ່ເປັນໄປໄດ້ | ການແກ້ໄຂ |
|---|---|---|
| Trimmer ບໍ່ເລີ່ມຕົ້ນ. | ແບັດເຕີຣີບໍ່ໄດ້ຕິດຕັ້ງຢ່າງຖືກຕ້ອງ ຫຼືໝົດ. ບໍ່ໄດ້ມີສ່ວນຮ່ວມໃນການລັອກຄວາມປອດໄພ. | Ensure battery is fully charged and properly seated. Press safety lock-out button before trigger. |
| ສາຍ Trimmer ບໍ່ກ້າວໜ້າ. | Line tangled or too short. Spool jammed. | Remove battery, clear any tangles, or replace line. Clean spool area. |
| ການສັ່ນສະເທືອນຫຼາຍເກີນໄປ. | Damaged or unbalanced cutting line. Loose components. | Replace cutting line. Check all fasteners and tighten if necessary. |
ຂໍ້ມູນຈໍາເພາະ
| ຄຸນສົມບັດ | ລາຍລະອຽດ |
|---|---|
| ຍີ່ຫໍ້ | Kobalt |
| ໝາຍເລກຕົວແບບ | Kobalt |
| ແຫຼ່ງພະລັງງານ | Battery Powered (24 Volt) |
| ຄວາມກວ້າງຂອງການຕັດ | 12 ນິ້ວ |
| ຂະໜາດສິນຄ້າ | 37"L x 12"ວ |
| ນ້ໍາຫນັກລາຍການ | 8.58 ປອນ |
| ຕ້ອງການສະພາແຫ່ງ | ແມ່ນແລ້ວ |
| ບໍ່ມີສາຍ | ແມ່ນແລ້ວ |
| ການນໍາໃຊ້ທີ່ແນະນໍາ | Trimming and edging grass and weeds |
| UPC | 653341244567 |
ການເກັບຮັກສາ
- Remove the battery pack before storing.
- Store the trimmer in a clean, dry area, away from direct sunlight and extreme temperatures.
- ຮັກສາໃຫ້ໄກຈາກເດັກນ້ອຍ.
ການຮັບປະກັນ ແລະການຊ່ວຍເຫຼືອລູກຄ້າ
ສຳລັບຂໍ້ມູນການຮັບປະກັນ ຫຼື ການຊ່ວຍເຫຼືອດ້ານເຕັກນິກ, ກະລຸນາອ້າງອີງເອກະສານທີ່ມາພ້ອມກັບການຊື້ຂອງທ່ານ ຫຼື ຕິດຕໍ່ຜູ້ຜະລິດໂດຍກົງ. ເກັບຫຼັກຖານການຊື້ຂອງທ່ານໄວ້ເພື່ອການຮຽກຮ້ອງການຮັບປະກັນ.
For additional assistance, you may visit the official Kobalt webເວັບໄຊ ຫຼືຕິດຕໍ່ພະແນກບໍລິການລູກຄ້າຂອງເຂົາເຈົ້າ.
