1. ຜະລິດຕະພັນເກີນview
The Einhell GC-HH 18/45 Li T-Solo is a battery-powered telescopic hedge trimmer designed for efficient and ergonomic hedge maintenance. It is part of the Einhell Power X-Change system, allowing for interchangeable use of 18V lithium-ion batteries across various tools.
ຮູບ 1: ເຕັມ view of the Einhell GC-HH 18/45 Li T-Solo Battery Hedge Trimmer.
ຄຸນນະສົມບັດທີ່ສໍາຄັນ:
- ລະບົບ Power X-Change: Compatible with all 18V Power X-Change lithium-ion batteries.
- ແຜ່ນໃບມີຄຸນນະພາບສູງ: Laser-cut and diamond-sharpened steel blades for precise cutting. Maximum cutting length of 410mm at 1,400 cuts per minute.
- Adjustable Motor Head: Motor head can be tilted to 7 positions for versatile use.
- Rotating Main Grip: Provides flexible handling and ergonomic work positions.
- ການຂະຫຍາຍແບບຍືດຫຍໍ່: Includes an extension rod for reaching taller hedges.
- ການກໍ່ສ້າງທີ່ເຂັ້ມແຂງ: Features a durable metal gear for extended service life.
- Comfortable Operation: Equipped with an additional rubber gripping surface and a carrying strap for secure and ergonomic handling.
- ການເກັບຮັກສາ: Supplied with a stable quiver for safe storage and transport.
Figure 2: The Einhell GC-HH 18/45 Li T-Solo is part of the Power X-Change family, allowing battery interchangeability.
2. ຄໍາແນະນໍາຄວາມປອດໄພ
Always observe basic safety precautions when using electrical tools to reduce the risk of fire, electric shock, and personal injury. Read all instructions carefully before operating the hedge trimmer.
ຄຳເຕືອນຄວາມປອດໄພທົ່ວໄປ:
- ຄວາມປອດໄພໃນພື້ນທີ່ເຮັດວຽກ: ຮັກສາພື້ນທີ່ເຮັດວຽກໃຫ້ສະອາດ ແລະ ມີແສງສະຫວ່າງດີ. ຫ້າມໃຊ້ເຄື່ອງມືໄຟຟ້າໃນບັນຍາກາດທີ່ລະເບີດ, ເຊັ່ນໃນທີ່ປະທັບຂອງຂອງແຫຼວ, ອາຍແກັສ, ຫຼືຝຸ່ນ.
- ຄວາມປອດໄພທາງໄຟຟ້າ: ຫຼີກເວັ້ນການສໍາຜັດກັບຮ່າງກາຍກັບພື້ນດິນຫຼືຫນ້າດິນ. ຫ້າມບໍ່ໃຫ້ເຄື່ອງໃຊ້ໄຟຟ້າຖືກຝົນ ຫຼືສະພາບທີ່ປຽກ.
- ຄວາມປອດໄພສ່ວນຕົວ: Always wear eye protection, hearing protection, and heavy-duty gloves. Dress appropriately; avoid loose clothing or jewelry that can get caught in moving parts. Secure long hair.
- ການນໍາໃຊ້ແລະການດູແລເຄື່ອງມື: ຢ່າບັງຄັບເຄື່ອງມື. ໃຊ້ເຄື່ອງມືທີ່ຖືກຕ້ອງສໍາລັບຄໍາຮ້ອງສະຫມັກຂອງທ່ານ. ຖອດຊຸດຫມໍ້ໄຟຈາກເຄື່ອງມືກ່ອນທີ່ຈະເຮັດການປັບ, ປ່ຽນອຸປະກອນເສີມ, ຫຼືເກັບຮັກສາເຄື່ອງມືພະລັງງານ.
- Hedge Trimmer ຄວາມປອດໄພສະເພາະ: Keep hands away from the cutting blades. Do not attempt to remove cut material or hold material to be cut when blades are moving. Ensure all guards are in place and functioning correctly.
- ການນໍາໃຊ້ຫມໍ້ໄຟແລະການດູແລ: Use only with specified battery packs and chargers. Do not short-circuit a battery pack. Do not expose battery packs to heat or fire.
3. ສ່ວນປະກອບ
Familiarize yourself with the main components of your Einhell GC-HH 18/45 Li T-Solo hedge trimmer for safe and effective operation.
Figure 3: Key components include the robust metal gear, extendable guide pole, and balanced battery position.
- ໃບຕັດ: Laser-cut and diamond-sharpened for efficient trimming.
- ຫົວມໍເຕີ: Contains the motor and cutting mechanism, adjustable for various angles.
- Telescopic Pole: Allows for extended reach, featuring an 84 cm extension.
- Main Grip: Ergonomically designed, with a rotating function for optimal working positions.
- ຊ່ອງໃສ່ຫມໍ້ໄຟ: Located at the base of the main grip for balanced weight distribution.
- ສາຍສາກ: For comfortable and secure handling during operation.
Figure 4: The guide pole is separable and includes an 84 cm extension for reaching high hedges.
Figure 5: The motor head can be tilted to 7 positions for fatigue-free work and optimal cutting angles.
Figure 6: The main handle rotates for optimal adaptation to any working position, enhancing ergonomics.
ຮູບທີ 7: ໄລຍະໃກ້ view of the laser-cut and diamond-sharpened steel blades, designed for precision.
Figure 8: The included carrying strap helps distribute weight for comfortable and prolonged use.
4. ຕັ້ງຄ່າ
Proper setup ensures safe and efficient operation of your hedge trimmer.
4.1 Attaching the Telescopic Pole:
- ໃຫ້ແນ່ໃຈວ່າເອົາຫມໍ້ໄຟອອກຈາກເຄື່ອງມື.
- Align the two sections of the telescopic pole.
- Push the sections together until they click securely into place. Ensure the locking mechanism is engaged.
- To extend the pole, loosen the locking collar, pull the inner pole to the desired length, and tighten the collar firmly.
4.2 Installing the Battery:
- ໃຫ້ແນ່ໃຈວ່າເຄື່ອງຕັດຕົ້ນໄມ້ຖືກປິດແລ້ວ.
- Slide a charged Einhell Power X-Change 18V battery pack into the battery compartment at the base of the main grip until it locks into place.
- ເພື່ອຖອດແບດເຕີຣີອອກ, ກົດປຸ່ມປ່ອຍແລະເລື່ອນຫມໍ້ໄຟອອກ.
4.3 Attaching the Carrying Strap:
- Attach the clips of the carrying strap to the designated attachment points on the hedge trimmer.
- Adjust the strap length for comfortable and balanced carrying, ensuring the tool's weight is evenly distributed.
5. ຄໍາແນະນໍາການດໍາເນີນງານ
Follow these guidelines for safe and effective operation of your hedge trimmer.
5.1 Pre-Operation Checks:
- Inspect the hedge trimmer for any damage, loose parts, or worn blades.
- Ensure all guards are in place and secure.
- Check that the battery is fully charged and correctly installed.
- Clear the work area of any obstacles, debris, or people/pets.
5.2 ການເລີ່ມຕົ້ນ ແລະຢຸດ:
- To start, firmly grip the main handle and press the safety switch, then squeeze the trigger switch.
- To stop, release the trigger switch. The blades will stop moving.
5.3 Adjusting the Motor Head and Grip:
- ຫົວມໍເຕີ: To adjust the angle of the motor head, press the release button/lever on the motor head and tilt it to one of the 7 available positions. Release the button to lock it in place.
- Main Grip: To rotate the main grip, press the release mechanism (if applicable) and turn the grip to your desired orientation. Ensure it locks securely.
5.4 ເຕັກນິກການຕັດ:
- ຖືເຄື່ອງຕັດຮົ້ວກັນຢ່າງແໜ້ນໜາດ້ວຍມືທັງສອງ.
- Maintain a stable footing and balance.
- For vertical cuts, swing the trimmer in an arc from bottom to top.
- ສໍາລັບການຕັດອອກຕາມລວງນອນ, ຍ້າຍ trimmer ຢ່າງຕໍ່ເນື່ອງຕາມດ້ານເທິງຂອງ hedge ໄດ້.
- Avoid cutting branches thicker than the maximum cutting capacity (18mm).
Figure 9: An individual demonstrating the use of the telescopic hedge trimmer for high hedges.
5.5 Battery Runtime Information:
The operating time varies depending on the battery capacity used. Refer to the chart below for approximate runtimes.
Figure 10: Maximum runtime per battery charge for various Power X-Change battery capacities.
- 2.0 AH: Approximately 28 minutes
- 2.5 AH: Approximately 33 minutes
- 3.0 AH: Approximately 40 minutes
- 4.0 AH: Approximately 56 minutes
- 5.2 AH: Approximately 66 minutes
- 6.0 AH: Approximately 80 minutes
- 8.0 AH: Approximately 112 minutes
6. ບໍາລຸງຮັກສາ
ການບໍາລຸງຮັກສາເປັນປົກກະຕິຮັບປະກັນອາຍຸຍືນແລະການປະຕິບັດທີ່ດີທີ່ສຸດຂອງເຄື່ອງຕັດຮົ້ວປ້ອງກັນຂອງທ່ານ.
6.1 ການດູແລໃບມີດ:
- ທໍາຄວາມສະອາດ: After each use, remove the battery and carefully clean the blades with a stiff brush to remove sap, leaves, and debris.
- ການລະບາຍສີ: Apply a light machine oil or blade lubricant to the cutting blades to prevent rust and ensure smooth operation.
- ຄົມຊັດ: If the blades become dull, they can be professionally sharpened or replaced. Refer to the manufacturer's guidelines for blade replacement.
6.2 General Cleaning and Storage:
- Wipe down the tool's housing with a damp ຜ້າ. ຢ່າໃຊ້ສານເຄມີທີ່ຮຸນແຮງຫຼືເຄື່ອງເຮັດຄວາມສະອາດຂັດ.
- ເກັບຮັກສາເຄື່ອງຕັດຮົ້ວໃນບ່ອນແຫ້ງ, ປອດໄພ, ຫ່າງຈາກເດັກນ້ອຍ.
- Always use the stable quiver (blade guard) when storing or transporting the tool.
- ເອົາຊຸດຫມໍ້ໄຟອອກກ່ອນທີ່ຈະເກັບຮັກສາໃນໄລຍະຍາວ.
7. ການແກ້ໄຂບັນຫາ
ພາກສ່ວນນີ້ແກ້ໄຂບັນຫາທົ່ວໄປທີ່ທ່ານອາດຈະພົບກັບເຄື່ອງຕັດຮົ້ວຂອງທ່ານ.
| ບັນຫາ | ສາເຫດທີ່ເປັນໄປໄດ້ | ການແກ້ໄຂ |
|---|---|---|
| ເຄື່ອງມືບໍ່ເລີ່ມຕົ້ນ | Battery not inserted correctly or discharged; Safety switch not engaged; Tool malfunction | ໃຫ້ແນ່ໃຈວ່າແບັດເຕີຣີໄດ້ສາກເຕັມ ແລະ ໃສ່ຢ່າງຖືກຕ້ອງ. ກົດປຸ່ມຄວາມປອດໄພກ່ອນທີ່ຈະເປີດໃຊ້ງານ. ຖ້າບັນຫາຍັງຄົງຢູ່, ໃຫ້ຕິດຕໍ່ຝ່າຍຊ່ວຍເຫຼືອ. |
| ປະສິດທິພາບການຕັດບໍ່ດີ | Dull or damaged blades; Blades clogged with debris; Cutting material too thick | Clean and lubricate blades. Sharpen or replace dull blades. Do not attempt to cut branches exceeding 18mm. |
| ການສັ່ນສະເທືອນຫຼາຍເກີນໄປ | Damaged blades; Loose components | Inspect blades for damage and replace if necessary. Check all connections and fasteners for tightness. |
| ມໍເຕີຢຸດໃນລະຫວ່າງການປະຕິບັດງານ | Overload protection activated; Battery discharged | Reduce cutting load. Allow motor to cool. Recharge or replace battery. |
8. ຂໍ້ມູນຈໍາເພາະ
Detailed technical specifications for the Einhell GC-HH 18/45 Li T-Solo hedge trimmer.
- ຍີ່ຫໍ້: ອີນເຮລ
- ໝາຍເລກຕົວແບບ: 3410585
- ແຫຼ່ງພະລັງງານ: Battery Powered (18V Power X-Change system)
- ສີ: ສີແດງ
- ນ້ໍາຫນັກລາຍການ: ປະມານ 6.99 ປອນ (3.17 ກິໂລ)
- ຄວາມຍາວຂອງແຜ່ນໃບ: 450 ມິນລີແມັດ (45 ຊມ)
- Cutting Width (Max): 18 ມິນລິແມັດ (0.7 ນິ້ວ)
- ວັດສະດຸ: Alloy Steel, Rubber, Metal
- ວັດສະດຸແຜ່ນ: ເຫຼັກໂລຫະປະສົມ
- ຄວາມໄວ: 1400 RPM (ຕັດຕໍ່ນາທີ)
- ຂະໜາດຜະລິດຕະພັນ: 81.89 x 2.95 x 5.31 ນິ້ວ (208 x 7.5 x 13.5 cm)
Max. 18 mm cutting width
Length extension up to +67 cm
Durable metal gear
18 V Power X-Change
9. ການຮັບປະກັນແລະການສະຫນັບສະຫນູນ
For warranty information, product registration, or technical support, please refer to the documentation included with your purchase or visit the official Einhell webເວັບໄຊ. ຮັກສາຫຼັກຖານການຊື້ຂອງທ່ານສໍາລັບການຮ້ອງຂໍການຮັບປະກັນ.
ຊັບພະຍາກອນອອນໄລນ໌: For the most up-to-date information, FAQs, and additional support, please visit the official Einhell webເວັບໄຊ ຫຼືຕິດຕໍ່ພະແນກບໍລິການລູກຄ້າຂອງເຂົາເຈົ້າ.
