Lepro 40ft RGB LED Strip Lights User Manual

1. ບົດແນະນຳ

Thank you for choosing Lepro RGB LED Strip Lights. This manual provides detailed instructions for the safe and efficient use of your new LED strip lights. These versatile lights offer a wide range of colors and modes, perfect for enhancing various indoor environments.

Figure 1: Lepro 40ft RGB LED Strip Lights in a living room setting.

2. ສິ່ງທີ່ຢູ່ໃນກ່ອງ

ກະ​ລຸ​ນາ​ກວດ​ສອບ​ເນື້ອ​ໃນ​ຂອງ​ຊຸດ​ເພື່ອ​ໃຫ້​ແນ່​ໃຈວ່​າ​ລາຍ​ການ​ທັງ​ຫມົດ​ມີ​ຢູ່​:

• 1 x 39.4ft (12m) Non-Waterproof RGB LED Strip
• 1 x 44-Key IR ຣີໂມດຄວບຄຸມ
• 1 x 24V Power Adapter (US Plug)

3. ຂໍ້ມູນຄວາມປອດໄພ

Read all safety instructions before installation and use. Keep this manual for future reference.

• ໃຊ້ພາຍໃນເຮືອນເທົ່ານັ້ນ: This product is designed for indoor use and is not waterproof.
• ການສະຫນອງພະລັງງານ: Use only the provided 24V power adapter. Using an incorrect power supply may damage the product and void the warranty.
• ດ້ານການຕິດຕັ້ງ: ຮັບປະກັນວ່າພື້ນຜິວຕິດຕັ້ງສະອາດ, ແຫ້ງ ແລະ ລຽບເພື່ອໃຫ້ກາວມີປະສິດທິພາບດີທີ່ສຸດ.
• ຕັດແຖບ: Only cut the LED strip at designated cut marks (every 3 LEDs). Cutting elsewhere will damage the strip.
• ຫຼີກ​ລ້ຽງ​ການ​ຮ້ອນ​ເກີນ​ໄປ​: Do not coil the LED strip tightly when powered on, as this can cause overheating.
• ເດັກ​ນ້ອຍ​ແລະ​ສັດ​ລ້ຽງ​: ເກັບຮັກສາຜະລິດຕະພັນ ແລະ ສ່ວນປະກອບຂອງມັນໃຫ້ໄກຈາກເດັກນ້ອຍ ແລະ ສັດລ້ຽງ.

4. ການຕິດຕັ້ງ & ການຕິດຕັ້ງ

ປະຕິບັດຕາມຂັ້ນຕອນເຫຼົ່ານີ້ສໍາລັບການຕິດຕັ້ງທີ່ເຫມາະສົມ:

1. ການ​ກະ​ກຽມ​ຫນ້າ​ດິນ​: Clean the desired installation surface thoroughly to remove dust, oil, or moisture. A clean, dry surface ensures strong adhesion.
2. ວັດແທກ ແລະ ຕັດ (ຖ້າຈຳເປັນ): Unroll the LED strip and measure the required length. If shortening is needed, cut the strip only at the designated cut marks, typically indicated by a copper line and a scissor icon, every 3 LEDs.
3. ຕິດຂັດ: Peel off the backing from the 3M adhesive tape on the back of the LED strip. Carefully press the strip onto the cleaned surface, ensuring firm contact along its entire length.
4. Secure with Fixing Clips (Optional): For added security, especially on textured surfaces or corners, use the provided fixing clips. Secure them at regular intervals or critical points along the strip.
5. ເຊື່ອມຕໍ່ພະລັງງານ: Connect the LED strip to the IR receiver, and then connect the IR receiver to the 24V power adapter. Plug the power adapter into a standard electrical outlet.
6. ເປີດໃຊ້ໄລຍະໄກ: Before first use, remove the plastic insulation tab from the battery compartment of the 44-key IR remote control.

Figure 2: Visual guide for LED strip installation steps.

Figure 3: Connection diagram and remote activation.

Figure 4: 3M Adhesive and Fixing Clips.

5. ຄໍາແນະນໍາການດໍາເນີນງານ

Control your LED strip lights using the included 44-key IR remote control. Ensure the remote is pointed directly at the IR receiver for optimal response.

Figure 5: 44-Key IR Remote Control Layout.

ຟັງຊັນການຄວບຄຸມໄລຍະໄກ:

• ເປີດ/ປິດ: Power button to turn the lights on or off.
• ການປັບຄວາມສະຫວ່າງ: ໃຊ້ ↑ ແລະ ↓ buttons to increase or decrease brightness.
• ການເລືອກສີ: Choose from 16 preset static colors, including Red, Green, Blue (RGB), and White.
• ສີ DIY: 6 programmable DIY buttons allow you to save your favorite custom color mixes.
  • ກົດ ກ DIY ປຸ່ມ.
  • ໃຊ້ ↑ ແລະ ↓ arrows next to R, G, B to adjust the intensity of each primary color.
  • ກົດຄືກັນ DIY button again to save your custom color.
• ການເລືອກໂໝດ: Select from 8 dynamic modes (e.g., Flash, Fade, Jump) to create different lighting effects.
  • ກະແສໄຟຟ້າ: Jumps between colors.
  • FADE3/FADE7: ຈາງລົງລະຫວ່າງ 3 ຫຼື 7 ສີ.
  • JUMP3/JUMP7: Jumps between 3 or 7 colors.
  • ອັດຕະໂນມັດ: Cycles through all modes.
  • ໄວ/ຊ້າ: Adjusts the speed of dynamic modes.

Figure 6: Remote control in use for ambient lighting.

6. ບໍາລຸງຮັກສາ

Proper maintenance ensures the longevity of your LED strip lights.

• ທໍາຄວາມສະອາດ: Gently wipe the LED strip with a soft, dry cloth to remove dust. Do not use liquid cleaners or immerse the strip in water.
• ການເກັບຮັກສາ: ຖ້າເກັບຮັກສາໄຟໄວ້ເປັນເວລາດົນ, ໃຫ້ຮັບປະກັນວ່າໄຟສະອາດ, ແຫ້ງ ແລະ ມ້ວນຢ່າງວ່າງໆເພື່ອປ້ອງກັນຄວາມເສຍຫາຍ.
• ຫຼີກເວັ້ນການງໍ: Do not bend the LED strip sharply, especially at the connection points, as this can damage the internal circuitry.

7. ການແກ້ໄຂບັນຫາ

ຖ້າ​ຫາກ​ທ່ານ​ພົບ​ບັນ​ຫາ​, ເບິ່ງ​ບັນ​ຫາ​ທົ່ວ​ໄປ​ດັ່ງ​ຕໍ່​ໄປ​ນີ້​ແລະ​ການ​ແກ້​ໄຂ​:

8. ຂໍ້ມູນຈໍາເພາະ

Figure 7: ETL Listed 24V Power Adapter.

9. ການຮັບປະກັນແລະການສະ ໜັບ ສະ ໜູນ

Lepro products are designed for reliability and performance. For specific warranty details and customer support, please refer to the warranty card included with your product or visit the official Lepro webເວັບໄຊ.

ຂໍ້ມູນຕິດຕໍ່:

• Webເວັບໄຊ: www.lepro.com (ກະລຸນາກວດສອບເຈົ້າຫນ້າທີ່ webເວັບໄຊທ໌ສຳລັບຂໍ້ມູນຕິດຕໍ່ທີ່ທັນສະໄໝທີ່ສຸດ.)
• ອີເມວ: ອ້າງເຖິງການຫຸ້ມຫໍ່ຜະລິດຕະພັນຫຼື webເວັບໄຊ.