1. ຜະລິດຕະພັນເກີນview
The Einhell Power X-Change 5.2 Ah Battery Twinpack consists of two 18V 5.2 Ah Power X-Change PLUS batteries. These batteries are integral components of the versatile and fully interchangeable Einhell Power X-Change rechargeable battery system. Designed for universal use across all PXC devices, they offer significant cost savings and environmental benefits by allowing a single battery and charger to power multiple tools.
The 18V 5.2 Ah PXC PLUS battery is a high-end model within the Power X-Change family, suitable for TWIN-PACK applications requiring 36V. Its robust housing is engineered to resist dust, corrosion, and mechanical impacts. A protective rubber coating enhances impact resistance and provides a secure grip. A convenient trough handle facilitates easy removal from any tool.
Figure 1: Einhell Power X-Change 5.2 Ah Battery Twinpack. Each battery features a charge indicator with four green LEDs and a robust, ergonomic design.
2. ຄໍາແນະນໍາຄວາມປອດໄພ
Always observe the following safety precautions when handling and using your Einhell Power X-Change batteries:
- Do not expose batteries to heat, direct sunlight, or fire.
- ຫ້າມບໍ່ໃຫ້ເກີດການວົງຈອນຂອງແບັດເຕີລີ່.
- ຢ່າແຊ່ແບັດເຕີຣີລົງໃນນໍ້າ ຫຼື ຂອງແຫຼວອື່ນໆ.
- Store batteries in a cool, dry place, away from flammable materials.
- Only use original Einhell chargers for charging.
- Do not attempt to open, modify, or repair the battery pack.
- ຮັກສາຫມໍ້ໄຟໃຫ້ໄກຈາກເດັກນ້ອຍ.
- In case of battery leakage, avoid contact with skin and eyes. Rinse affected areas with water and seek medical attention.
- Dispose of depleted batteries responsibly according to local regulations.
3. ການຕິດຕັ້ງແລະການນໍາໃຊ້ເບື້ອງຕົ້ນ
3.1 ການຫຸ້ມຫໍ່
Carefully remove the batteries from their packaging. Inspect them for any signs of damage. If any damage is observed, do not use the batteries and contact customer support.
3.2 ການສາກແບັດເຕີລີ
Before first use, fully charge both batteries. Use only an Einhell Power X-Change charger (sold separately). The charging process is as follows:
- ເຊື່ອມຕໍ່ສາຍສາກກັບປລັກສຽບໄຟທີ່ເຫມາະສົມ.
- ເລື່ອນແບັດເຕີຣີໃສ່ເຄື່ອງສາກຈົນກວ່າມັນຈະເຂົ້າທີ່.
- ໄຟຕົວຊີ້ວັດຂອງເຄື່ອງສາກຈະສະແດງສະຖານະຂອງການສາກໄຟ. ເບິ່ງຄູ່ມືສາກໄຟຂອງທ່ານສໍາລັບຮູບແບບແສງສະຫວ່າງສະເພາະ.
- Once fully charged, the indicator light will change (e.g., solid green). Remove the battery from the charger.
The batteries feature a proactive battery management system and adapted charging cycles to optimize lifespan and performance.
4. Operating the Batteries
4.1 ການໃສ່ຫມໍ້ໄຟເຂົ້າໄປໃນເຄື່ອງມື
ກວດໃຫ້ແນ່ໃຈວ່າໄດ້ປິດເຄື່ອງກ່ອນໃສ່ ຫຼືຖອດແບັດເຕີຣີອອກ.
- Align the battery with the battery slot on your Einhell Power X-Change tool.
- Slide the battery firmly into the slot until it clicks securely into place.
- To remove, press the release button(s) on the battery (or tool, depending on design) and slide the battery out.
4.2 ຕົວຊີ້ວັດການສາກແບັດເຕີຣີ
Each battery is equipped with an LED charge indicator. Press the button next to the LEDs to check the current charge level:
- ໄຟ LED 4 ອັນ: 75-100% ຄ່າບໍລິການ
- ໄຟ LED 3 ອັນ: 50-75% ຄ່າບໍລິການ
- ໄຟ LED 2 ອັນ: 25-50% ຄ່າບໍລິການ
- ໄຟ LED 1 ອັນ: ສາກໄຟ 0-25% (ຕື່ມໃໝ່ໃນໄວໆນີ້)
5. ການ ບຳ ລຸງຮັກສາແລະການເກັບຮັກສາ
5.1 ການທໍາຄວາມສະອາດ
Wipe the battery surface with a clean, dry cloth. Do not use abrasive cleaners or solvents. Ensure the battery terminals are clean and free of debris.
5.2 ການເກັບຮັກສາ
For optimal battery life, store batteries in a cool, dry place (ideally between 5°C and 20°C / 41°F and 68°F) and away from direct sunlight or extreme temperatures. If storing for extended periods, charge the batteries to approximately 50-75% capacity. Avoid storing fully discharged batteries.
6. ການແກ້ໄຂບັນຫາ
| ບັນຫາ | ສາເຫດທີ່ເປັນໄປໄດ້ | ການແກ້ໄຂ |
|---|---|---|
| ແບັດເຕີຣີບໍ່ໄດ້ສາກ. | ບໍ່ໄດ້ສຽບສາຍສາກໄຟ; charger faulty; ແບດເຕີຣີຮ້ອນ / ເຢັນເກີນໄປ; ຫມໍ້ໄຟທີ່ຜິດພາດ. | Check power connection; try another charger; allow battery to reach room temperature; contact customer support if battery is faulty. |
| ເຄື່ອງມືບໍ່ໄດ້ເຮັດວຽກກັບຫມໍ້ໄຟ. | Battery not fully inserted; battery discharged; faulty tool; faulty battery. | Ensure battery is clicked into place; charge battery; test with another battery/tool; contact customer support. |
| Battery charge indicator not working. | Button malfunction; internal fault. | Ensure button is pressed firmly; if issue persists, contact customer support. |
7. ຂໍ້ມູນຈໍາເພາະ
- ໝາຍເລກຕົວແບບ: 4511526
- ປະເພດຫມໍ້ໄຟ: Lithium Ion (Li-Ion)
- ສະບັບtage: 18 ວ
- ຄວາມອາດສາມາດ: 5.2 ອ້າວ (Ampຊົ່ວໂມງ)
- ຂະໜາດຜະລິດຕະພັນ: 4.84 x 3.03 x 2.87 ນິ້ວ (12.3 x 7.7 x 7.3 cm)
- ນ້ໍາຫນັກລາຍການ: 1.96 pounds (0.89 kg) per battery
- ຈໍານວນຫມໍ້ໄຟ: 2 (included in twinpack)
- ການນໍາໃຊ້ທີ່ແນະນໍາ: Power Tools within the Einhell Power X-Change system
8. ການຮັບປະກັນແລະການສະຫນັບສະຫນູນ
Einhell products are manufactured with high-quality materials and undergo strict quality control. For information regarding warranty terms and conditions, please refer to the warranty card included with your purchase or visit the official Einhell website. For technical support, spare parts, or service inquiries, please contact Einhell customer service through their official channels.
ໄອນເຮວ ຢ່າງເປັນທາງການ Webເວັບໄຊ: www.einhell.com
