PowerWalker VFI 3000 AT UPS User Manual

ແນະນຳ

The PowerWalker VFI AT series is an online Uninterruptible Power Supply (UPS) system designed to provide reliable power protection for critical electronic devices. This manual provides essential information for the safe and efficient operation of your PowerWalker VFI 3000 AT UPS, model 10122182.

ຄໍາແນະນໍາຄວາມປອດໄພທີ່ສໍາຄັນ

ກະລຸນາອ່ານ ແລະ ປະຕິບັດຕາມຄຳແນະນຳທັງໝົດຢ່າງລະອຽດກ່ອນການຕິດຕັ້ງ, ໃຊ້ງານ ຫຼື ບໍລິການ UPS. ເກັບຄູ່ມືນີ້ໄວ້ເພື່ອອ້າງອີງໃນອະນາຄົດ.

• UPS ນີ້ມີສານລະລາຍອັນຕະລາຍtagຢ່າພະຍາຍາມຖອດເຄື່ອງອອກ. ການບໍລິການຄວນເຮັດໂດຍພະນັກງານທີ່ມີຄຸນວຸດທິເທົ່ານັ້ນ.
• UPS ຕ້ອງເຊື່ອມຕໍ່ກັບປລັກສຽບໄຟ AC ທີ່ມີດິນ.
• ຫ້າມປິດຊ່ອງລະບາຍອາກາດ. ຮັບປະກັນການໄຫຼວຽນຂອງອາກາດທີ່ພຽງພໍຮອບ UPS.
• Do not install the UPS in direct sunlight, near heat sources, or in environments with excessive dust, humidity, or corrosive substances.
• The internal batteries are not user-replaceable. Contact qualified service personnel for battery replacement.
• In case of fire, use a dry chemical fire extinguisher. Water can be dangerous.

ເນື້ອໃນຊຸດ

Verify that all items listed below are included in your package. If any items are missing or damaged, contact your dealer.

• PowerWalker VFI 3000 AT UPS Unit
• ຄູ່ມືຜູ້ໃຊ້ (ເອກະສານນີ້)
• ສາຍ​ການ​ສື່​ສານ USB
• ສາຍໄຟເຂົ້າ
• CD ຊອບ​ແວ (ຖ້າ​ມີ​)

ສິນຄ້າເກີນview

ແຜງໜ້າ

ຮູບທີ 1: ດ້ານໜ້າ view of the PowerWalker VFI 3000 AT UPS. This image displays the main chassis, ventilation grilles, and the front control panel with its LCD screen and buttons.

ຮູບທີ 2: ລະອຽດ view of the UPS front panel. The LCD screen shows input/output voltage and load status. Below the screen are control buttons: ON, OFF, ENTER, and ESC, used for navigating menus and controlling the unit.

The front panel features an LCD display that provides real-time information about the UPS status, including input/output voltage, battery level, and load capacity. Control buttons allow for navigation through the display menus and basic operation of the unit.

ແຜງດ້ານຫລັງ

ຮູບທີ 3: ຫລັງ view of the PowerWalker VFI 3000 AT UPS. This panel includes multiple Type F earthing contact outlets for connecting protected devices, cooling fans, a main power input, and communication ports (USB, RS-232, and an optional slot for network card).

The rear panel provides the necessary connections for input power, output to protected devices, and communication interfaces. It includes four Type F earthing contact outlets, a terminal output, USB and RS-232 communication ports, and slots for optional accessories like network cards.

ຄໍາແນະນໍາການຕິດຕັ້ງ

1. ບັນຈຸເຂົ້າຮຽນ

• Place the UPS on a flat, stable surface.
• Ensure the environment is well-ventilated and free from excessive dust or moisture.
• Maintain at least 20 cm (8 inches) of clearance from the rear and sides of the UPS for proper airflow.
• Avoid placing the UPS near heat-emitting appliances.

2. ການເຊື່ອມຕໍ່ກັບພະລັງງານ

1. Connect the provided power input cable to the UPS input receptacle on the rear panel.
2. Plug the other end of the power input cable into a grounded wall outlet.
3. ອະນຸຍາດໃຫ້ UPS ສາກໄຟຢ່າງໜ້ອຍ 8 ຊົ່ວໂມງກ່ອນການໃຊ້ງານເບື້ອງຕົ້ນ ເພື່ອຮັບປະກັນປະສິດທິພາບຂອງແບັດເຕີຣີທີ່ດີທີ່ສຸດ.

3. ອຸປະກອນເຊື່ອມຕໍ່

1. Plug your critical devices (e.g., computers, servers, network equipment) into the Type F output receptacles on the rear panel of the UPS.
2. Ensure that the total load connected to the UPS does not exceed its rated capacity (2700W for this model).
3. For devices requiring terminal output, connect them according to electrical safety standards.

4. ການເລີ່ມຕົ້ນເບື້ອງຕົ້ນ

1. After connecting the UPS to AC power and allowing initial charging, press and hold the ON button on the front panel for approximately 2 seconds.
2. The UPS will perform a self-test, and the LCD display will illuminate, indicating operational status.
3. The UPS is now providing protected power to the connected devices.

ປະຕິບັດການ UPS

ເປີດ/ປິດ

• ເພື່ອເປີດ: ກົດຄ້າງໄວ້ ON ປຸ່ມສໍາລັບ 2 ວິນາທີ.
• ປິດ: ກົດຄ້າງໄວ້ ປິດ button for 2 seconds. The UPS will shut down, and power to connected devices will cease.

ຄວາມເຂົ້າໃຈກ່ຽວກັບຈໍສະແດງຜົນ LCD

The LCD display provides critical information about the UPS status. Use the ປ້ອນ ແລະ ESC buttons to navigate through different display screens, which may include:

• ການປ້ອນຂໍ້ມູນ Voltage ແລະຄວາມຖີ່
• ຜົນໄດ້ຮັບ Voltage ແລະຄວາມຖີ່
• ລະດັບການສາກໄຟ
• ໂຫຼດ Percentage
• Operating Mode (Online, Battery, Bypass)
• ລະຫັດຂໍ້ຜິດພາດ (ຖ້າມີ)

ປະຕິບັດການສໍາຮອງຂໍ້ມູນຫມໍ້ໄຟ

ໃນກໍລະນີຂອງພະລັງງານ outage ຫຼື ປະລິມານທີ່ສຳຄັນtage fluctuation, the UPS will automatically switch to battery power to provide continuous power to connected devices. An audible alarm may sound, and the LCD will indicate "Battery Mode." The duration of battery backup depends on the load connected and the battery charge level.

ຊອບແວການສື່ສານ

For advanced monitoring and management, install the provided communication software on a computer connected to the UPS via the USB or RS-232 port. This software allows for scheduled shutdowns, remote monitoring, and detailed event logging.

ບໍາລຸງຮັກສາ

ການດູແລຫມໍ້ໄຟ

• Ensure the UPS is connected to AC power at all times to keep the batteries fully charged.
• Perform a battery self-test periodically (e.g., once every 3 months) using the UPS front panel controls or communication software to verify battery health.
• Batteries have a limited lifespan. If the battery backup time significantly decreases, contact qualified service personnel for replacement.

ທໍາຄວາມສະອາດ

• ຖອດ UPS ອອກຈາກໄຟ AC ແລະອຸປະກອນທີ່ເຊື່ອມຕໍ່ທັງໝົດກ່ອນທຳຄວາມສະອາດ.
• Use a soft, dry cloth to wipe the exterior of the UPS.
• Do not use liquid or aerosol cleaners, as they may damage the unit.
• Periodically clean the ventilation grilles to prevent dust buildup, which can impede airflow and cause overheating.

ການເກັບຮັກສາ

• If storing the UPS for an extended period, ensure the batteries are fully charged.
• Store the UPS in a cool, dry place.
• Recharge the batteries every 3 months during storage to prevent deep discharge and prolong battery life.

ການແກ້ໄຂບັນຫາ

Refer to the table below for common issues and their solutions. If the problem persists, contact technical support.

ຂໍ້ມູນຈໍາເພາະ

ການຮັບປະກັນແລະການສະຫນັບສະຫນູນ

The PowerWalker VFI 3000 AT UPS is covered by a manufacturer's warranty. For detailed warranty terms and conditions, please refer to the warranty card included with your product or visit the official PowerWalker webເວັບໄຊ.

For technical support, service inquiries, or to report any issues, please contact your local dealer or PowerWalker customer service. Have your model number (10122182) and purchase information ready when contacting support.