PetJoy Automatic Shock Collar User Manual

1. ບົດແນະນຳ

This user manual provides comprehensive instructions for the safe and effective operation of your PetJoy Automatic Shock Collar. This device is designed to assist in dog training through various modes including beep, vibration, and static stimulation, and features an automatic bark detection mode. Please read this manual thoroughly before use to ensure proper handling and to maximize the training benefits for your dog.

2. ຂໍ້ມູນຄວາມປອດໄພ

Your dog's safety and comfort are paramount. Always prioritize humane training practices. Improper use of this device can cause physical or psychological harm to your dog. Observe your dog's reactions closely and discontinue use if signs of stress or discomfort are observed.

• ບໍ່ແມ່ນສໍາລັບຫມາທີ່ຮຸກຮານ: ຢ່າໃຊ້ຜະລິດຕະພັນນີ້ກັບໝາທີ່ມີຮຸກຮານ.
• ອາຍຸ ແລະ ສຸຂະພາບ: This collar is intended for healthy dogs over 6 months old. Consult a veterinarian if your dog has any health concerns.
• Collar Fit: Ensure the collar fits snugly but not too tightly. It should allow two fingers to fit comfortably between the strap and your dog's neck.
• ໄລຍະເວລາຂອງການສວມໃສ່: Do not leave the collar on your dog for more than 12 hours per day. Prolonged wear can lead to skin irritation.
• ການກວດກາຜິວໜັງ: Regularly inspect your dog's neck for signs of irritation, redness, or sores. If irritation occurs, discontinue use and consult a veterinarian.
• ຈຸດຕິດຕໍ່: The contact points must have direct contact with your dog's skin. Long fur may require trimming to ensure proper contact.
• ການເບິ່ງແຍງກວດກາ: Always supervise your dog when the collar is in use.
• ຄວາມປອດໄພນ້ໍາ: While the receiver is IP67 waterproof, ensure the charging port is properly sealed before exposure to water.

3. ເນື້ອໃນຊຸດ

ເມື່ອເປີດແພັກເກັດ, ໃຫ້ກວດເບິ່ງວ່າອົງປະກອບທັງໝົດມີຢູ່:

• ເຄື່ອງສົ່ງໄລຍະໄກ
• ຄໍ ລຳ ຮັບ
• ສາຍຮັດໄນລອນທີ່ສາມາດປັບໄດ້
• ສາຍສາກ USB
• ທົດສອບເຄື່ອງມືແສງ
• Contact Points (Short and Long)
• ຄູ່ມືຜູ້ໃຊ້

Image: Contents of the PetJoy Automatic Shock Collar package, showing the remote, receiver, charging cable, and various accessories.

4. ຕັ້ງຄ່າ

4.1 ການສາກອຸປະກອນ

Before initial use, fully charge both the remote transmitter and the receiver collar. The charging process typically takes 2-3 hours.

• Connect the USB charging cable to the charging ports on both the remote and the receiver.
• Plug the USB cable into a compatible USB power source (e.g., USB power adapter, computer USB port, power bank).
• The indicator lights will show charging status (refer to specific light indicators in the quick start guide).

Image: Illustration demonstrating simultaneous charging of the remote control and receiver collar using the provided USB cable.

Image: Different power sources compatible with the USB charging cable for the PetJoy collar, including USB power strips, computers, power banks, and power adapters.

4.2 Attaching the Collar and Fitting

Proper fit is essential for both effectiveness and your dog's comfort.

• Select the appropriate length of contact points (short for short-haired dogs, long for long-haired dogs) and screw them into the receiver.
• Thread the adjustable nylon strap through the receiver.
• Place the collar on your dog's neck so that the contact points are underneath, touching the skin.
• Adjust the strap to be snug, allowing only two fingers to fit between the strap and your dog's neck. The receiver should not move freely on the neck.

Image: Visual guide to the dimensions of the PetJoy receiver and collar, along with an indication of suitable dog sizes (3.3-132 lbs).

4.3 Pairing the Remote with the Receiver

The remote and receiver must be paired for remote control functionality.

1. Ensure both the remote and receiver are sufficiently charged.
2. Turn on the receiver by pressing the power button once.
3. Press and hold the power button on the receiver until the indicator light flashes rapidly.
4. Within 10 seconds, press any function button on the remote control (e.g., Beep, Vibration, or Shock button).
5. ໄຟສັນຍານຂອງເຄື່ອງຮັບສັນຍານຈະຢຸດກະພິບ ແລະ ຍັງຄົງສະຫວ່າງຢູ່, ຊີ້ບອກວ່າການຈັບຄູ່ສຳເລັດແລ້ວ.

Image: Visual instructions for pairing the PetJoy receiver and remote, highlighting the power button on the receiver and any function key on the remote.

5. ປະຕິບັດການອຸປະກອນ

5.1 ຮູບແບບການຝຶກອົບຮົມ

The PetJoy collar offers three distinct training modes:

• ໂໝດ Beep: Delivers an audible tone. This is often used as an initial warning or for positive reinforcement.
• ໂໝດສັ່ນສະເທືອນ: Provides a non-harmful vibration. Intensity levels can typically be adjusted from 1 to 100.
• ໂໝດຊ໊ອກ: Delivers a static stimulation. Intensity levels can typically be adjusted from 1 to 100. Use this mode with caution and at the lowest effective level.

Image: Depiction of the three training modes (Beep, Vibration, Shock) available on the PetJoy collar, with adjustable levels for vibration and shock.

5.2 ຫນ້າທີ່ຄວບຄຸມໄລຍະໄກ

The remote control allows you to manually apply corrections and switch between modes.

• ປຸ່ມເປີດປິດ: ເປີດ/ປິດຣີໂໝດ.
• ປຸ່ມໂໝດ: Dedicated buttons for Beep, Vibration, and Shock modes.
• +/- ປຸ່ມ: Adjust the intensity level for Vibration and Shock modes.
• ປຸ່ມ CH: Switches between different collar channels if you are training multiple dogs.
• ປຸ່ມແສງສະຫວ່າງ: Activates the flashlight on the remote.

Image: The PetJoy remote control and receiver collar, illustrating the design and relative sizes of the components.

5.3 Automatic Bark Mode

The receiver collar features an automatic bark detection mode that can operate independently of the remote.

• To activate/deactivate the auto mode, locate the sensor hole on the receiver and follow the instructions in the quick start guide or product details.
• In auto mode, the collar will automatically deliver corrections (typically beep, then vibration, then static) when it detects barking.

Image: Close-up of the PetJoy receiver collar highlighting the "Auto Mode Sensor Hole" and indicating the ability to toggle auto mode on or off.

5.4 Control Range

The remote control offers a significant operating range, allowing for training in various environments.

• The effective control range is up to 2800 feet (approximately 850 meters) in open areas with no obstructions.
• Environmental factors, such as terrain, weather, and electromagnetic interference, can affect the actual range.

Image: A visual representation of the PetJoy collar's long control range, showing a dog and handler in an open field with a stated range of up to 2800 feet.

6. ບໍາລຸງຮັກສາ

Proper maintenance ensures the longevity and optimal performance of your PetJoy collar.

• ທໍາຄວາມສະອາດ: Wipe the receiver and remote with a damp ຜ້າ. ຢ່າໃຊ້ສານເຄມີທີ່ຮຸນແຮງຫຼືເຄື່ອງເຮັດຄວາມສະອາດຂັດ.
• ການດູແລຫມໍ້ໄຟ:
  • ສາກອຸປະກອນໃຫ້ເຕັມກ່ອນທີ່ຈະບໍ່ມີການເຄື່ອນໄຫວເປັນເວລາດົນ.
  • Recharge every 3-4 months if not in use to maintain battery health.
  • The remote has a standby time of up to 90 days, and the receiver has a working time of up to 30 days on a full charge.
• ກັນນ້ຳ: The receiver is IP67 waterproof, meaning it can withstand immersion in up to 1 meter of water for 30 minutes. Ensure the charging port cover is securely closed before exposing the receiver to water.

Image: A border collie splashing in water, illustrating the IPX7 waterproof protection feature of the PetJoy receiver collar.

7. ການແກ້ໄຂບັນຫາ

8. ຂໍ້ມູນຈໍາເພາະ

• ໝາຍເລກຕົວແບບ: PJ-PD525
• ຍີ່ຫໍ້: PetJoy
• ນ້ໍາຫນັກລາຍການ: 1.23 ອອນສ໌ (35 ກຣາມ)
• ວັດສະດຸ: Acrylonitrile Butadiene ສະໄຕຣີນ
• ສີ: ດຳ
• ປະເພດຫມໍ້ໄຟ: Lithium Polymer (ລວມ)
• Remote Standby Time: ສູງສຸດ 90 ມື້
• Receiver Working Time: ສູງສຸດ 30 ມື້
• ການປະເມີນກັນນ້ໍາ: IP67 (ຕົວຮັບ)
• ໄລຍະການຄວບຄຸມ: ເຖິງ 2800 ຟຸດ (ພື້ນທີ່ເປີດ)
• ທີ່​ເຫມາະ​ສົມ​ສໍາ​ລັບ​ຫມາ​: 3.3-132 lbs

9. ການຮັບປະກັນແລະການສະຫນັບສະຫນູນ

PetJoy stands behind the quality of its products. For warranty information, product support, or any inquiries, please refer to the contact details provided on the product packaging or visit the official PetJoy webເວັບໄຊ. ກະລຸນາຮັກສາຫຼັກຖານການຊື້ຂອງທ່ານສໍາລັບການຮຽກຮ້ອງການຮັບປະກັນ.

PetJoy Store: Visit the PetJoy Store on Amazon